Click image to open expanded view
16Ft Chrome Silver Automotive Car Exterior and Interior Molding Trim Universal Bumper Window Door Body Side Decorative Strip Scratch-Proof (1/2 inch (12mm))
Hey folks! Since the thread for the Non Saga Crew has been moved to completed, I figured now would be a good time to create a new thread to discuss potential updates. Wouldn't want to have these things fade into obscurity
Here's a list of things mentioned on the previous thread:
- Compad
-> Replace images of OT TIE compads with IGC compad. Change compad to be mandatory component, unless we find evidence, that they shouldn't be mandatory.
-> If more evidence is found we could add the compad style seen on Yort Cavwol.
-> I feel like it might be worth discussing r1 TIE compads should be permitted. I haven't been able to find evidence for them being used for the Crewman.
- Flight Suit
-> Flap on the back of the suit (Level 3?)
-> Nylon Strapping on the top of the com cylinder sleeves may be permitted for L1, but should not be there for L2/3
-> Remove padding in shoulders for L2/3
In my opinion, reusing the R1 TIE suit for L2/3 should likely not be possible. The suits are different enough to the point where a mere zipper swap is likely not gonna cut it.
- Gloves -> Find evidence that gauntlets are suitable. If not, remove gauntlets. Add shorter officer style gloves, optionally three lines on hand(?)
- Boots -> Remove "buckle/strap" requirement, as we have multiple screen used instances of boots with no Buckles being used.
- Optional headset? -> If somebody gets around to building one
Link to previous thread, where some additional images and info has been posted.
I know some of the updates concern optional accessories. However, imo that shouldn't be a reason to have people grab wrong things or have wrong images around for what is effectively a costume guideline for many people.
Updated:
Removed trenchcoat till we have someone make one.
Thoughts?
Dedra Meero
Model ID 18079, Photo by Dominik Wilhelm
Visit the [[{{{5}}}|Gallery for this Costume]] for more models and parts views.
Description: Dedra Meero Prefix: ID Detachment: Imperial Officer Corps Context: Andor Methodical, polished, and ambitious, Dedra Meero embodies the ideals of the Imperial Security Bureau. She is ever vigilant, collecting and analyzing intelligence from across the galaxy to identify possible signs of disorder. Her ingenuity serves her well, climbing the ranks by piecing together a clear picture of rebel activity from disparate parts.
For 501st membership only the requirements in black need to be met.
The Imperial Officer Corp Detachment defines additional, optional levels of costuming excellence. In the page below, items listed in blue are optional features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume. Please visit the Detachment website for more specific details.
This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type.
This document is not intended to be a detailed how-to on costume construction; rather a visual guide to be used for 501st costume approval. Details on construction may be found on the respective costume detachment web forum.
GMLs uncertain about an aspect of submitted costume shall post questions in the appropriate DL/GML peer review section of the Legion forum.
Measurements given in this document are intended to be approximate and generalized; not criteria for approval.
Requirements for all 501st costumes are proportional to the wearer in scale, fit and size.
Text descriptions are only one part of the guideline. GMLs and costumers must consider both text and pictures (CRL and Reference) when reviewing the costume.
Hair Style
Hair is blonde; achieved via natural hair color or a naturally styled wig.
Worn in a tight bun, and hair is parted on the left side.
Imperial Hat, Black
Hat is OPTIONAL but only if a specific referenced licensed character’s typical uniform configuration is copied in full, and does not typically include a hat.
Fabric is a medium weight suiting material matching the pants and tunic if applicable.
Cavalry Twill or a Gabardine style weave is most accurate.
Base of the hat is conical, with a crown about 4 inches (101.6 mm) tall.
Front and rear “flaps” overlap on the sides, with the back flap over the front, and are about 4 inches (101.6 mm) high.
Front bill extends 3 inches (76.2 mm) down, decorated with five (5), six (6) or seven (7) concentric stitches.
Imperial Code Disk is positioned in the center of the front vertical flap.
OPTIONAL Level two certification (if applicable):
Code disk has NO notch in the outermost disk.
Tunic
Fabric should be a medium weight, white suiting material.
Tunic is double-breasted with a left over right closure on the tapered yoke.
Yoke comes up across the shoulder to the top shoulder seam.
The standing collar has square corners and is between 1.25 inches (31.8 mm) to 2 inches (50.8 mm) tall dependent on wearer’s neck size.
Collar closes snug.
Modesty panel is OPTIONAL.
Collar edges are closed with two (2) eye hooks.
There are code cylinder pockets on both outside panels of the jacket from about halfway between the top and bottom on the arm hole.
Sleeves are long, and without decoration, cuffs, or buttons.
Sleeves contain 2 seams; one along the bottom and one along the back.
Tunic is constructed with no top-stitching (stitches visible on the exterior surface of fabric).
Hook and eye fasteners on the uniform should not be visible.
Optional: Up to two (2) hooks may be added through the sides of the tunic to hold belt in place. Hooks must be black.
OPTIONAL Level two certification (if applicable):
There is a dart of about 2 inches (50.8 mm) in the top center of the yoke.
There is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt.
The back of the tunic has princess seams that run vertically and turn outward to intersect the arm-hole seam at the vertical center.
OPTIONAL Level three certification (if applicable):
Tunic is secured on the right side by snaps, hook, & bar, buttons, or unseen magnets; not hook and loop fastener (Velcro).
A lining is sewn in.
Rank Bar
Rank consists of colored plastic tiles mounted on a single or double metal or metal looking bar(s).
Worn on the left side of the tunic over the heart, aligned with the code cylinder pocket.
Each bar is approximately 1 inch (25.4 mm) to 1.25 inches (31.75 mm) in height.
Rank bar has only three blue tiles.
Length is determined by chosen rank.
Rank tile dimensions and spacing are appropriate and proportional to the sizing of the bar to allow for even spacing from each other and the border of the bar:
Rogue One/Solo style rank tile dimensions are approximately 0.59 inches (15 mm) wide, 0.82 inches (21 mm) tall, and 0.12 inches (3.2 mm) deep.
Original Trilogy/Mandalorian style rank tile dimensions are approximately 0.5 inch (12.7 mm) wide, 0.75 inch (19 mm) tall, and 0.125 inch (3.2 mm) deep.
Rank tile sizes must all be of the same style and are not to be intermixed.
Please note that final dimensions of the bar may be proportional to the wearer.
Rank bar corners are a hard 90 degree angle, or slightly rounded.
Rank tiles are translucent, rectangular, positioned side by side in a vertical orientation, and evenly spaced.
Color, quantity, and combinations of the tiles/bars are determined by rank and are appropriate to uniform type/color as supported by licensed reference.
OPTIONAL Level two certification (if applicable):
Rank consists of colored plastic push buttons (with white to off white insert) mounted on a metal bar.
Rank tiles are the Rogue One/Solo larger size, approximately 0.59 inches (15 mm) wide, 0.82 inches (21 mm) tall, and 0.12 inches (3.2 mm) deep.
Code Cylinders
Two Code Cylinders are worn.
Dosimeter style with correct silver clip (no brass) and blue top.}
OPTIONAL Level two certification (if applicable):
Only real or replica dosimeters are used.
Belt
The belt is constructed from a black, non-textured, leather, or a leather-like material.
Approximately 2 inches (50.8 mm) in width, up to 2.5 inches (63.5 mm) is acceptable.
There are no loops on the belt.
A single large snap or rivet is visible approximately 1 inch (25.4 mm) from the buckle.
The belt may be worn with the snap to the right or left of the buckle.
It is preferred to wear the snap to the left of the wearer, unless emulating a specific licensed character.
The buckle is constructed from a horizontally brushed metal, or metal looking material.
The buckle size is approximately 2.6250 inches (66.7 mm) high and 4.1250 inches (104.5 mm) wide with 0.5 inches (12.7 mm) radius rounded corners.
Buckle is adorned with an un-notched Imperial Code Disk at the center.
Please refer to the Imperial Buckle reference page for information on accurate and inaccurate style buckles.
OPTIONAL Level two certification (if applicable):
Belt is made of leather.
Belt has a groove at the top and bottom edge along the length of the belt.
Buckle has a slight horizontal curve.
Jodhpur Trousers, Black
Fabric is a medium weight suiting material matching the tunic.
Cavalry Twill or a Gabardine style weave is most accurate.
Trousers are flared riding breeches, with semi-stiff flares to the hip/thigh area.
Breeches are worn with boots.
Breeches are neatly pressed or ironed without creases.
Pockets are acceptable, although must not be visible with the tunic on.
Boots
Knee-high, black, riding style, lace-less, smooth non-textured, leather or leather-like material.
There are no buckles, snap tabs or decoration.
Boots have conservative heels.
A single stretch panel or zipper may be present, they are to be hidden on the inner part of the boot shaft.
Not visible from the front, side or back.
The top of the boots may be flat or Spanish Style, but not Cowboy or Super Hero (pointed at the front) style.
OPTIONAL Level two certification (if applicable):
Boots are made of leather and have no zippers.
OPTIONAL Level three certification (if applicable):
Original German marching boots or authentic replication.
Boots have a top adjustment strap on the outside of the boots.
Boots to have a flat top.
The straps are set slightly to the rear with the tabs facing the rear.
Optional Accessories
Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.
Belt boxes (Non-Saga style)
Dimensions are approximately 2 inches (50.8 mm) wide, 3 inches (76.2 mm) tall and 1 inch (25.4 mm) thick.
Two boxes to be worn vertically, one each on either side of the belt buckle.
OPTIONAL Level two certification (if applicable):
Belt boxes are made of metal or cast resin.
If resin, corners have a “stepped 90-degree cutout” in the shape of a square on all four corners of the face of the box.
Gloves
Black, wrist length gloves constructed of a smooth, non-textured leather or leather-like material.
Enclosed fingers.
No buckles, straps, etc.
OPTIONAL Level two certification (if applicable):
Gloves have a plain back and no visible adornments.
Gloves made of leather.
Gloves end just past the wrist.
OPTIONAL Level three certification (if applicable):
Gloves have a notch centered in the edge below the palm.
Slit may be straight or rounded.
Briefcase
Based off a vintage Rimowa 'Limbo' Attache.
Approximate dimensions are 35 cm x 28 cm x 10 cm.
Has a black ribbed pattern on the sides.
The center where the two halves meet gives the appearance of aluminum.
A silver greeblie that gives the appearance of being made of aluminum is present on the lower left side.
MerrSonn Power5 Blaster
Scratch built or high-end prop replica based on a Mauser C96, M712, or M617.
The wire on the top is straight, not coiled.
The ribs of the cooling module are black with very heavy silver weathering to the point where it looks almost all silver.
Merr Sonn Power5 Holster
Holster is black in color.
Outer circumference of holster is curved around the basic shape of the blaster.
Holster has a form-fitting contour around the blaster itself, with a cutout for "cooling module" .
Holster has one belt loop that is integrated into the holster body.
A safety strap that secures the blaster in the holster is present.
Holster is not present if no weapon is carried with the costume.
OPTIONAL Level two certification (if applicable):
Holster is worn on the right side.
After reading through this thread, I think she deserves a face CRL like Tarkin. That, and she has a ton of screen time compared to the generic Andor ISBs...
Daetrin reacted to saspringett in The Andor Coffee Tumbler Thread
Daetrin got a reaction from BHAsajj in Dedra Meero CRL?
Daetrin got a reaction from Bettina1138 in Dedra Meero CRL?
Daetrin got a reaction from Callista in CRL proposal Jayhold Beehaz Gala Uniform (Andor)
Daetrin got a reaction from TK1571 in The Andor Coffee Tumbler Thread
(3).thumb.jpg.6a0bac5284fb232b9ecf3461dcb42f2e.jpg)
Daetrin got a reaction from Eagle in Merry Christmas and Happy Holidays
Daetrin got a reaction from bjsavage7 in Imperial Army Trooper (Andor)
