Imperialrebel

I thought so. Are there any recommended sellers out there? I have been talking to CrowProps but they are closed due to the Pandemic and Imperial Boots isn't currently making them. 
 
Failing that, any recommendations for good base boots which I can alter?

Thank you for the hint. I have shot him a message. Hopefully will have an answer soon. 

So update. Looks like we have finally figured out the hat. My guess of normal Imperial style with the neck seal style ribbing for the main body, as shown in the concept sketch looks correct. The front 'flap' looks a bit longer than a normal one, from my guess but the basics is the same. The visor looks kinda plastic instead of fabric. 
 

 



 
Sorry for the bad quality pics. I don't have the digital copy and my laptop doesn't had a disc player so this was taken off my TV. 
 
Also of note, it looks like the back of the jacket has a yoke or seam at the middle of the sleeves, across the back. Sadly we didn't see this prior to making my jacket but hopefully should be an easy fix. This is the only picture I could find showing the back and its not great quality so it may be a trick of the light (only saw it for about .03 of a second) unless anyone has a better picture. I have now ordered the boots and a friend is 3D printing the Sith Logos so hopefully will be done soon.

Argh. Its been so long! (Back to work and its hectic) but update. I have the boots and pants done now. Just need to make the hat and do a few details and I am done. I will post pics in a little while. 

Ask and you shell recieve 
 

 
Still need to get the right belt buckle and gloves, secure the rank sleeve and make the hat and the jacket badge but I feel like I am on the home stretch now. The Shark Pants are so derpy and I love them! (And yes, I am aware there is no neck seal in this picture. I forgot to put it on for the pic and now I can't be bothered retaking it)

lantern2745, great picture! 
 
I have given it a go. Not sure about the belt in general but hopefully it is ok. I am still waiting to get the Sith Logo for the buckle and hopefully that will work
 

 
I am amazed at how many tiny details there are in this costume. Speaking of, do you happen to have a close up of the rank band? I did a mockup using ones I saw on FO officers but from what I can tell, the Aurabesh is different for these ones and I cannot find a clear picture (and am clearly a novice in Aurabesh) I have no idea what will be on the correct band. Thank you for all your help and support.
 
 

I have been taking the photos from a lower angle which I think may affeact the perception a little but yes, the belt is a stand in and doesn't sit where I want it. Hopefully it will look a bit more accuract now that I got the proper belt

And another update. I fixed up the rank band so now it should be correct. Finally bit the bullet and attempted to make a silver badge and finally got my belt and hat badge. Now just need to finish making the hat and I think I am almost ready. 
 



 

For mine, I bought and cut down a sheet of ribbbed matting black rubber. I then used a thick nylon on the back to reinforce it. It took three goes, a very sharp knife and a metal ruler to cut the rubber straight but it worked. 
 
I am Australian so I bought the sheet from a place called 'Clark Rubber'. 

So, did my first ever attempt at making a hat. Its not perfect but since a pattern does not yet exist and I basically eyeballed it all (plus, working with four different materials. please don't get me started on the brim. Heavy duty leatherette is the devil) not a bad first attempt. Still needs some cleanup. 
 

 

 

 
Once I perfect this, I think I am ready to attempt to submit it  Unless there is any little thing I am missing? This is the rest of the costume. 
 

 
 

Not sure yet.

So, I made a new hat with a slightly shorter brim and put everything together. 
I will need to tighten the belt but other than that, I think I am done
 

 
I am so please with how this came out.

I've already started going through my costume and trying to word it right for a CRL, if you would like me to post it here? 

Based on other Officer CRLs I read up on, I did a bit of a mock up for the Sith hat. Please let me know if I am on the right track here. (This is just based off my measurements and materials) If it works, I will start on the rest.
 
Hat, Sith Officer, Black
The front brim is a black leather-like material. It is curved and does not obscure the wearer's eyes.
Fabric of the crown is a ribbed black pleather which runs horizontal along the crown
Base of the hat is conical, with a crown about 4" (101.6 mm) tall.
Front and rear ‘flaps’ are of a black medium weight suiting material matching the pants and tunic.
Front and rear "flaps" overlap on the sides.
Front flap is about 4.5” (114.3 mm) The flap is vertical with a tilt outwards around the sides of the hat.
Rear flap is about 4" (101.6 mm) The flap is vertical with a tilt outwards around the sides and back.
Sith Code Disk is positioned at the center of the front vertical flap.

Awesome. I will get started writing up the other pieces and we can tweek them as we go

So here is my attempt at a CRL based on my costume. I tried to take the measurements out of it for the most part (Exept the belt buckle since mine was a re-purposed Imperial Buckle and matched the dementions on that CRL) Please let me know if I am on the right track. 
 
Sith Eternal Officer CRL
 
Description: Sith Etental/Final Order Officer
Prefix: ID
Detachment: Imperial Officer Corps
Context: Star Wars: The Rise of Skywalker
Officers in the High Command of the Final Order, raised on the planet Exegol by the Sith Eternal—Sith cultists who revered the dark side of the Force and were devoted to the Sith religion. 
     
Hat, Sith Officer, Black
The front brim is a black leather-like material. It is curved and does not obscure the wearer's eyes.
Fabric of the crown is a ribbed black pleather
Base of the hat is conical, with a crown about 4" tall.
Front and rear ‘flaps’ are of a black medium weight suiting material matching the pants and tunic.
Front and rear "flaps" overlap on the sides.
Front flap is about .5" higher than the rear flap. The flap is vertical with a tilt outwards around the sides of the hat.
Rear flap is vertical with a tilt outwards around the sides and back.
Sith Code Disk is positioned at the center of the front vertical flap.
Tunic
Fabric is a black, medium weight suiting, matching the pants.
The piping is a red 3-5mm binding.
The closure is at the centre front using an invisible zip and hook and bars, enclosed by the red piping.
The sleeves are long and end at the wrist.
The chest yoke is attached at the right shoulder and closes with hooks and bars. It is the same fabric as the tunic, and sits directly on the red piping.
The tunic is fitted to the body, with a shoulder yoke on the back. 
It has a waist seam beneath the belt, with vertical darts stopping mid chest.
Rank and insignia are attached on the left arm.
Neck Seal
Black horizontal ribs fitted to the wearer to conceal the entire neck. 
Neck Seal is fitted under the jacket and should reach under the chin.
Chest Rank Bar
A plain metal rectangle with radiused ends. 2 ½” long by ⅜ width. 
Bar is attached to the jacket by metal pins or magnets.
Jodhpur Pants
Fabric is a black, medium weight suiting, matching the tunic.
Flared riding breeches have semi-stiff flares in the hip/thigh area, below the tunic and above the knee.
Flare is triangular in shape and fits snugly at the knee.
Waist closure is a standard lap zipper, with hook and bar fixtures. This is concealed by the tunic.
 
Officer Boots, Sith Officer
Knee-high, black, lace-less, smooth non-textured, leather or leather-like material, with moderate to high-gloss shine.
There are no stretch panels, buckles, snap tabs, or decoration.
Boot seams closely match screen-used boots.
Soles are flat.
If zippers are present, they are on the inner part of the boot shaft only.
Boots are the same as First Order Officers boots
Belt, Sith Officer
The belt is constructed from a ribbed rubber or rubber like material.
Belt is approximately 2.5" to 3" in width.
There are no loops on the belt.
The buckle is constructed from a horizontally brushed metal, or metal looking material.
The buckle size is approximately 2 5/8" (66.7 mm) high and 4 1/8" (104.5 mm) wide with rounded corners.
Buckle is adorned with a Sith Code Disk at the center.
Gloves, Sith Officer, Black
Gloves are constructed of a non-textured, black leather or leather-like material.
Enclosed fingers.
Gloves are gauntlet length, fitted, and worn underneath the sleeves.
No buckles, straps, etc.
Rank Insignia, Sith Officer
Worn on the left side of arm, above the wrist and below the elbow
Rank consists of one black band sewn down to the sleeve with Aurebesh embroidered on it. The edges utilize piping or an embroidered line on each side.
For Captain, the Aurebesh spells “Stem"
Both piping (if used) and embroidery (Aurabesh and lines) are red.

For thise asking about the back. Here are my screenshots. I managed to lighten the picture and there is 100% a seam across the back, around shoulder height. 
 

 
And heres mine
 

 
 

So since I am not at Celebration (jealous of you all but since I am on the other side of the world, its tricky to get there) I did the alterations as agreed. I have changed nothing else except the seams on the back. Here are my new photos.
 
Close up of the Back

 
Front

 
Back

 
Left Side

 
Right Side

 
Action

 

So, I'm guessing there is no further news on the CRL? Just curious.

outstanding, I hope this is approved soon enough!
 
Steph, you have done some amazing work and look sensational!
 

This will be the text submitted to the LMO team.  It is the same as the previous submission last year with the exception that a single line has been removed from the Tunic section.

The tunic has a center seam in the back, reaching the yoke.

This line has been removed after learning the details of how the back was constructed by direct contact with LFL by the LCO.  The costume has been altered to reflect this single detail change in the above photos.  The rest stands as before.
 
Sith Eternal Officer CRL
 
Description: Sith Eternal / Final Order Officer
Prefix: ID
Detachment: Imperial Officer Corps
Context: Star Wars: The Rise of Skywalker
Officers in the High Command of the Final Order, raised on the planet Exegol by the Sith Eternal—Sith cultists who revered the dark side of the Force and were devoted to the Sith religion. 
 
Hat, Sith Officer, Black
The front brim is a shiny black patent leather-like material. It is curved and does not obscure the wearer's eyes. The brim should attach to the hat body to present smooth curves at the sides, aligning with the back flap. The visible sides of the crown have an appearance of ribbed black leather, rubber, or similar material. Base of the hat is conical, with a crown approximately 4" (100mm) tall. Hat is roughly cone shaped with a flat crown Front and rear ‘flaps’, and top of the crown, are of a black medium weight suiting material matching the pants and tunic. Front and rear "flaps" overlap on the sides, with the back flap's ends overlapping the front's where they attach to the body of the hat. Front flap is approximately .5" to 1" (12-25mm) higher than the top of the crown, and crisp and smooth in appearance. The flap is vertical with a tilt outwards around the sides of the hat. Rear flap is vertical with a tilt outwards around the sides and back. Sith Code Disk is metal or metal appearance and is positioned at the center of the front vertical flap.  
Tunic
Fabric is a black, medium weight suiting, exactly matching the pants. The closure is at the center front using a zipper with concealed teeth, surrounded by visible red material approx 3-5mm wide. There is red ribbon or similar approximately 1/8" to 1/4" (3-5mm) wide, crossing the chest from each side and angling slightly down to meet in the center of the tunic, combining with the center closure to form a flattened Y shape , when worn. The sleeves are long and end at the wrist. The tunic is fitted to the body, with a shoulder yoke across the back. There is no vent in the back of the tunic. A vertical dart on each side of the front may extend up from the waist under the belt, stopping approximately mid chest, if needed to accommodate body curvature. Rank band insignia is attached on the left arm approximately 1/3 of the distance from the elbow to the wrist. A V-shaped separate chest yoke is attached to the top and front of the tunic, extending up from directly above the red lines.  It is the same fabric as the tunic, with smooth, semi-rigid construction. The Chest Yoke follows the neck curvature and extends to cover the top of the shoulders with faux epaulettes atop the shoulder, and ending at the back of the epaulettes atop the shoulder. The Chest Yoke attaches in a seamless, flush, invisible manner.  
Level 2: The Tunic's yoke across the back shall intersect the arm-hole seams approximately 1/3 of the way down the arms, from the top. There is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt.
  Level 3: There is a lining sewn in.  
Neck Seal
The Neck Seal shall have an appearance of ribbed black leather, rubber, or similar material. The Neck Seal is fitted to the wearer under the jacket, with horizontal ribs. The ribbed material extends from the base of the neck to just under the chin, to conceal the entire neck.  
Chest Rank Bar
A plain metal rectangle with radiused half-circles on the long ends, approximately 2 ½” (63.5mm) long by ⅜" (10mm) width and 1/8" (3mm) thick. Bar is attached flush to the tunic by concealed means.  
Jodhpur Pants
Fabric is a black, medium weight suiting, exactly matching the tunic. Flared riding breeches have semi-stiff flares in the hip/thigh area, below the tunic and above the knee. Pockets and waist belts are acceptable, if not visible with the tunic on. Flares are sharply triangular in shape and fit snugly at the knee.  
Officer Boots, Sith Officer
Knee-high, black, lace-less, smooth non-textured, leather or leather-like material, with moderate to high-gloss shine. There are no stretch panels, snap tabs, or decoration, other than the adjustment buckle at the top, if present. Boot seams closely match screen-used boots. Soles are flat. If zippers are present, they are on the inner part of the boot shaft only.
  Level 2: Boots have an adjustment buckle at the top  
Belt, Sith Officer
The belt is constructed from a rubber or rubber like material with horizontal ribbing. Belt is approximately 2.5" to 3" (63.5-76.2mm) in width, and should match the height of the belt buckle. There are no loops on the belt. Belt fits snugly over the natural waist of the wearer, covering the horizontal tunic seam, if present. The buckle is constructed from metal, or metal looking material. The buckle size is approximately 2 5/8" (66.7 mm) high and 4 1/8" (104.5 mm) wide with rounded corners. Sith Code Disk is metal or metal appearance and is positioned at the center of the buckle.
  Level 2: Buckle has a satin finish, not brushed Corners are more rounded than Imperial Officer buckles from the original trilogy  
Gloves, Sith Officer, Black
Gloves are constructed of a non-textured, black leather or leather-like material. Gloves are have enclosed fingers, are fitted, and worn underneath the sleeves. Gloves are long enough to cover the wrist entirely. No visible buckles, straps, or ornamentation. Gloves may be plain or have three lines of stitching on the back of the hand.
  Level 2: Gloves have three lines of stitching on the back of the hand.  
Rank Insignia Band, Sith Officer
Worn on the left side of arm, above the wrist and below the elbow, approx 1/3 of the distance from the elbow to the wrist. Rank consists of one black band sewn down to the sleeve with raised red Aurebesh writing on it. The edges utilize piping or an embroidered line on each side. For the Captain rank, the Aurebesh spells “STELS". Additional rank options and corresponding Aurebesh shall be added as discovered from licensed sources. Both piping (if used) and embroidery (Aurabesh and lines) are red in color, close in color to the red used on the tunic stripes.

@Imperialrebel we have returned and are back on station.  We will be working with what you have presented to formally send to the LMO office.

So since I am not at Celebration (jealous of you all but since I am on the other side of the world, its tricky to get there) I did the alterations as agreed. I have changed nothing else except the seams on the back. Here are my new photos.
 
Close up of the Back

 
Front

 
Back

 
Left Side

 
Right Side

 
Action

 

So since I am not at Celebration (jealous of you all but since I am on the other side of the world, its tricky to get there) I did the alterations as agreed. I have changed nothing else except the seams on the back. Here are my new photos.
 
Close up of the Back

 
Front

 
Back

 
Left Side

 
Right Side

 
Action

 

So since I am not at Celebration (jealous of you all but since I am on the other side of the world, its tricky to get there) I did the alterations as agreed. I have changed nothing else except the seams on the back. Here are my new photos.
 
Close up of the Back

 
Front

 
Back

 
Left Side

 
Right Side

 
Action