Over at the JRS we did a bunch of research on it. We used references from the rebel Pilots, cassian andor, and the touring tie. It was verified by someone involved with production that there is one base commpad, and it’s painted differently for different characters (same as was done in the OT). We identified the found parts switch covers used, and bases sizing off of that. They are being made by Philo Props (Etsy) DHP-FX , and another maker in Germany (will update with their info) Here are some reference images
Just going to add this to the thread, because @Hask posted some aurebesh earlier in the thread with reversed characters. (That was also before we had a lock on the actual text, too)
This is the correct Aurebesh for the arm band: ("STELS")
Sorry to take so long to get back to this. No one else has been commenting on what we have so far, so I've worked on refining what I already had. At this point, I'm nearly happy with what we have here, with the exception of the wording describing the belt buckle corners. Any suggestions or comments before we bring in the LMOs?
Sith Eternal Officer CRL
Description: Sith Eternal / Final Order Officer
Prefix: ID
Detachment: Imperial Officer Corps
Context: Star Wars: The Rise of Skywalker
Officers in the High Command of the Final Order, raised on the planet Exegol by the Sith Eternal—Sith cultists who revered the dark side of the Force and were devoted to the Sith religion.
Hat, Sith Officer, Black
The front brim is a shiny black patent leather-like material. It is curved and does not obscure the wearer's eyes.
The brim should attach to the hat body to present smooth curves at the sides, aligning with the back flap.
The visible sides of the crown have an appearance of ribbed black leather, rubber, or similar material.
Base of the hat is conical, with a crown approximately 4" (100mm) tall.
Hat is roughly cone shaped with a flat crown
Front and rear ‘flaps’, and top of the crown, are of a black medium weight suiting material matching the pants and tunic.
Front and rear "flaps" overlap on the sides, with the back flap's ends overlapping the front's where they attach to the body of the hat.
Front flap is approximately .5" to 1" (12-25mm) higher than the top of the crown, and crisp and smooth in appearance. The flap is vertical with a tilt outwards around the sides of the hat.
Rear flap is vertical with a tilt outwards around the sides and back.
Sith Code Disk is metal or metal appearance and is positioned at the center of the front vertical flap.
Tunic
Fabric is a black, medium weight suiting, exactly matching the pants.
The closure is at the center front using a zipper with concealed teeth, surrounded by visible red material approx 3-5mm wide.
There is red ribbon or similar approximately 1/8" to 1/4" (3-5mm) wide, crossing the chest from each side and angling slightly down to meet in the center of the tunic, combining with the center closure to form a flattened Y shape , when worn.
The sleeves are long and end at the wrist.
The tunic is fitted to the body, with a shoulder yoke across the back.
The tunic has a center seam in the back, reaching the yoke.
There is no vent in the back of the tunic.
A vertical dart on each side of the front may extend up from the waist under the belt, stopping approximately mid chest, if needed to accommodate body curvature.
Rank band insignia is attached on the left arm approximately 1/3 of the distance from the elbow to the wrist.
A V-shaped separate chest yoke is attached to the top and front of the tunic, extending up from directly above the red lines. It is the same fabric as the tunic, with smooth, semi-rigid construction.
The Chest Yoke follows the neck curvature and extends to cover the top of the shoulders with faux epaullettes atop the shoulder, and ending at the back of the epaullettes atop the shoulder.
The Chest Yoke attaches in a seamless, flush, invisible manner.
Level 2: The Tunic's yoke across the back shall intersect the arm-hole seams approximately 1/3 of the way down the arms, from the top.
There is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt.
Level 3: There is a lining sewn in.
Neck Seal
The Neck Seal shall have an appearance of ribbed black leather, rubber, or similar material.
The Neck Seal is fitted to the wearer under the jacket, with horizontal ribs.
The ribbed material extends from the base of the neck to just under the chin, to conceal the entire neck.
Chest Rank Bar
A plain metal rectangle with radiused half-circles on the long ends, approximately 2 ½” (63.5mm) long by ⅜" (10mm) width and 1/8" (3mm) thick.
Bar is attached flush to the tunic by concealed means.
Jodhpur Pants
Fabric is a black, medium weight suiting, exactly matching the tunic.
Flared riding breeches have semi-stiff flares in the hip/thigh area, below the tunic and above the knee.
Pockets and waist belts are acceptable, if not visible with the tunic on.
Flares are sharply triangular in shape and fit snugly at the knee.
Officer Boots, Sith Officer
Knee-high, black, lace-less, smooth non-textured, leather or leather-like material, with moderate to high-gloss shine.
There are no stretch panels, snap tabs, or decoration, other than the adjustment buckle at the top, if present.
Boot seams closely match screen-used boots.
Soles are flat.
If zippers are present, they are on the inner part of the boot shaft only.
Level 2: Boots have an adjustment buckle at the top
Belt, Sith Officer
The belt is constructed from a rubber or rubber like material with horizontal ribbing.
Belt is approximately 2.5" to 3" (63.5-76.2mm) in width, and should match the height of the belt buckle.
There are no loops on the belt.
Belt fits snugly over the natural waist of the wearer, covering the horizontal tunic seam, if present.
The buckle is constructed from metal, or metal looking material.
The buckle size is approximately 2 5/8" (66.7 mm) high and 4 1/8" (104.5 mm) wide with rounded corners.
Sith Code Disk is metal or metal appearance and is positioned at the center of the buckle.
Level 2: Buckle has a satin finish, not brushed
Corners are more rounded than Imperial Officer buckles from the original trilogy
Gloves, Sith Officer, Black
Gloves are constructed of a non-textured, black leather or leather-like material.
Gloves are have enclosed fingers, are fitted, and worn underneath the sleeves.
Gloves are long enough to cover the wrist entirely.
No visible buckles, straps, or ornamentation.
Gloves may be plain or have three lines of stitching on the back of the hand.
Level 2: Gloves have three lines of stitching on the back of the hand.
Rank Insignia Band, Sith Officer
Worn on the left side of arm, above the wrist and below the elbow, approx 1/3 of the distance from the elbow to the wrist.
Rank consists of one black band sewn down to the sleeve with raised red Aurebesh writing on it. The edges utilize piping or an embroidered line on each side.
For the Captain rank, the Aurebesh spells “STELS".
Additional rank options and corresponding Aurebesh shall be added as discovered from licensed sources.
Both piping (if used) and embroidery (Aurabesh and lines) are red in color, close in color to the red used on the tunic stripes.
ID2606 reacted to buckrogersbarker in Kenneth Colley condition update
