Keylani

I use aluminium bar and tape. And look good.

Here are mine coffeee tumblers. They're not perfect, I use a silver tape and cardboard, but I think it will be fine for some time.
 
 

You can try Yoga pants like this and just rework
https://www.asos.com/asos-4505/asos-4505-icon-yoga-legging/prd/200245579?clr=black&colourWayId=200245581&cid=27175

Hi. I Buy some pants in local store and rework waist. Just cut if Its to long. :)

Hello Everyone～
 
I have finished my dress!
 
Please confirm thank you~
Also I found different details, the buttons used originally. But this time using trouser hooks.
 
Let me know if improvements are needed, hopefully I can finish this New CRLs.
 
Thank you all.
 
https://photos.app.goo.gl/KQWMLBYAwMoK1xwc7
 
 
 

I have with DS for my Grand Admiral Legend
 

I have with DS for my Grand Admiral Legend
 

On episode 6 we can see some kind of metal piece at each side of the military officers jacket to hold the belt. Can't get any screenshots right now but check minute 6:28 for example, on Colonel Petigar and 6:42 for Commandant Jayhold Beehaz (but I know this would be a completely new CRL). Can't remember if Lieutenant Gorn have this too.

Piece of foamed PVC, 4 layers of thick fleece, hot glue, curtain fringes (five layers), golden fabric, golden lamella and golden button for clothing and neodymium magnets

I tried to find ready epaulets but finding good and proper epaulets is very hard.
 
I will use longer firnges. I think they will better moving on shoulder
 
Final result
 

 

 

Hi. Good luck

Hi folks.
 
The LMO received a request from IOC to include the imperial enlisted flight suit  in the 501st roster of costumes. 
 
If it passes our LMO poll in 7 days time we'll be back here to help with the CRL.
 
Thanks for your patience,
 
-Eric

Hi folks.
 
The LMO received a request from IOC to include the imperial army operations office in the 501st roster of costumes. 
 
If it passes our LMO poll in 7 days time we'll be back here to help with the CRL.
 
Thanks for your patience,
 
-Eric

Hi folks.
 
The LMO received a request from IOC to include the imperial officer flight suit in the 501st roster of costumes. 
 
If it passes our LMO poll in 7 days time we'll be back here to help with the CRL.
 
Thanks for your patience,
 
-Eric

I want to link to the thread Marc started in the ISB section regarding the Imperial Army Operations Officer  (that´s the best term i heard so far) and propose a first draft for a future CRL based on the great work done over for the Fahrenheit 451 ANH staff officer.
 
 
So here we go:
 
Imperial Army Operations Officer from ANH   Imperial Hat, black
For 501st approval: Fabric is a medium weight suiting material matching the pants and tunic if applicable.  Gabardine style weave is most accurate. Base of the hat is conical, with a crown about 4" (101.6 mm) tall. Front and rear "flaps" overlap on the sides and are about 4" (101.6 mm) high. Front bill extends 3" down, decorated with 5, 6 or 7 concentric stitches. Imperial Code Disk is positioned in the center of the front vertical flap.  
 For level two certification (if applicable): Code Disk has a notch detail on the outermost disk.
 For level three certification (if applicable): Code disk exactly matches screen-used prop.  
 Tunic, lightgrey
For 501st approval: Fabric should be a medium weight suiting material exactly matching the pants and hat. Cavlary Twill weave is most accurate. Tunic is double-breasted with a left over right closure on at the right shoulder-seam. The back of the tunic replicates the front by the given look of the double breasted design of the front. Yoke closes up across the shoulder to the top shoulder seam. The standing collar has square corners and is about 1.6" (40.6 mm) tall and closes snugly There are code cylinder pockets on both outside panels of the jacket from about half way between the top and bottom on the arm hole. Sleeves are long, and without decoration, containing 2 seams, one along the bottom and one along the back. The rear seam opens at the cuffs at a length of about 3" (75mm) Tunic should be constructed with top-stitching (stitches visible on the exterior surface of fabric) 0,25" (6mm) from the outer edges of the double breast/double back, 1" (2,54mm) from the outer edge of the double breast/double back and directly underneath the edge of the codecylinder-pockets Hook and eye fasteners on the uniform should not be visible.  
 For level two certification (if applicable): There is a dart of about 2" (50.8 mm) in the top center of the yoke. The back of the tunics' replicated double-breast opens at both lower pleats.  
 For level three certification (if applicable): Tunic must be secured on the right side by snaps or buttons, not Velcro. There is no topstitching visible anywhere but at the noted points. a lining must be sewn in
 Rank Bar
For 501st approval: See the Imperial Rank Bar page for more information. Worn on the left side of the tunic over the heart. Rank consists of colored plastic tiles mounted on a metal bar The bar is 1" (25.4 mm) height. Length is determined by chosen rank Rank tile dimensions are 1/2" (12.7 mm)width x 3/4" (19 mm) height and about 1/8" (3.2 mm). Tiles are mounted with 1/4" (6.4 mm) spaces between them. Rank tiles are translucent. Color quantity and combinations are determined by rank, and are appropriate to uniform type. For example:  No Grand Moffs wore grey uniforms with hats.  Grand Admiral rank matches Grand Admiral uniform... etc.)  
 For level two certification (if applicable): Rank bar consists of six tiles.
 For level three certification (if applicable): Belt box, code cylinder, and rank badge configuration is consistent with film canon officers. Rank bar consists of colored plastic push buttons mounted on an metal bar There are only Four choices of rank bar for ANH Army Operations officers One row of six red tiles. One row of three red tiles and three amber tiles.  
   Belt
For 501st approval: The belt is constructed from a non-textured leather or a leather-like material. Approximately 2" (50.8 mm) in width, up to 3" (76.2 mm) is acceptable. There are no loops on the belt. A single large snap or rivet is visible approximately 1" (25.4 mm) from the buckle. The belt may be worn with the snap to the right or left of the wearer. The buckle is constructed from a horizontally brushed metal, or metal looking material. The buckle size is approximately 2 5/8" (66.7 mm) high and 4 1/8" (104.5 mm) wide with 0.5" (12.7 mm) radius rounded corners. Buckle is adorned with an Imperial Code Disk at the center. Please refer to the Imperial Buckle reference page for information on accurate and inaccurate style buckles.  
 For level two certification (if applicable): Belt is made of leather. Snap is worn to the left of the wearer. Buckle is flat.
 For level three certification (if applicable): ANH Staff Officers should have a belt with undyed edges.    
 Jodhpur Trousers, black
For 501st approval: Fabric is a medium weight suiting material exactly matching the tunic and hat. Gabardine style weave is most accurate. Flared riding breeches are canon. Breeches must be worn with boots. Pockets are acceptable, although they are not visible with the tunic on.  
 Officer Boots
For 501st approval: Knee-high, black, lace-less, smooth non-textured, leather or leather-like material. Rubber is not acceptable. PVC or synthetic material is allowed as long as it gives the appearance of leather. There are no stretch panels, buckles, snap tabs, or decoration. Boots have conservative heels. If zippers are present, they are hidden on the inner part of the boot shaft. Not visible from the front, side or back. The top of the boots may be flat or Spanish Style, but not Cowboy or Super Hero (pointed at the front) style.  
 For level two certification (if applicable): Boots do not have a zipper.
 For level three certification (if applicable): Boots are made of leather. Not vinyl or PVC. Exact replicas of English riding (dress) boots or Equestrian boots.
 
Optional Accessories
Items below are optional costume accessories. These items are not required for approval, but if present appear as described below.   Belt Boxes
For 501st approval: Dimensions are approximately 2 1/2" (63.5 mm) by 3 1/2" (88.9 mm) by 1" (25.4 mm) thick.. Two boxes may be worn horizontally on either side of the belt buckle. Placement of the screw / rivet for the belt boxes should be on the shortest side (left and right for horizontal) An uneven number of boxes is incorrect. Box surfaces are smooth and have no decoration/ hinges/ visible holes or slots that do not appear on the screen-used boxes.    For level two certification (if applicable): There is a covering on the back of each box with a slightly overlapping lip that is approximately 1/4” (6.35 mm). Covering is secured by a rivets or small screws, on the top and on the bottom.      
 
 
 

So you're of the opinion that unless LFL unlocks the vault and gives us a clear picture of the back (more than we got in the movie and that Stephanie put so much time into) that this should never become a CRL?

This isn't about two wrongs and a right, this is about consistency.  When we've had questions in the past we've extrapolated, and corrected the CRL when we got new info.  If what we think is a center seam turns out to be a center and two princess seams - on black fabric, even in a lined up group shot, are we going to be able to tell one from another?

Can’t agree more. Being in the same garrison as the one who has been working on this costume, I was super excited for it and would have followed as soon as the crl was greenlit.

Now?

Well I guess I’m staying with my bridge crew as my ONLY IOC costume.

Disappointed in the lmo’s for this. Disappointed in the sheer ridiculous nature of the call.

I have a better example for a possible fabric
 
 
 
 
 

Hello Everyone
 
I would like to take on the admiral rampart CRL. I took some screenshots from the third episode of the bad batch.
This is a first look, an first estimation. I think we we need more refernce material from the upcoming episodes.
There are some details wich are important in my eyes.
light brown/blond hair
a white shirt under the tunic
The code cylinders have flat sliver clips.
The silver plate of his rank bar has round edges and the blue/red tiles are square shaped and in another scene they are rectangular shaped.
His trousers are not flared out, they show a tight/comfortable fit.
The middle part of his tunic is longer than the rest and stands out from the rest of the jacket.
It reminds me a little bit on the ANH style tunic.
I looks like there are no seams on the back of the tunic.
He wears normal knee high riding boots without the cuff at the top of the shaft, like Tarkin or the republic officers from clone wars.
But I am not shure if there is sort of an adjustment strap at the top of the shaft
On his belt buckle is a code disc with two discs, one larger rivet at the left side of the buckle and three smaller rivets at the right side.
I also have a fabric example from "EmpiresFabric" on etsy.
 

 

 

 

 

 

 
 

 

 

 

 

 

 

 

 

 
 

 
 

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Just adding a JPG of the PDF rank chart Bob linked, so people don't necessarily have to download it to see what everyone is talking about.   (The text is still more crisp in the PDF, but this is handy, too)
 
Once Bob's next round of updates are complete, which he's working on now, I'll massage it into a prettier layout and we'll archive this entire thread and make a new one, so the OP has a more accurate / complete chart.
 

Hi. I would like to present to you, reference photos of the uniforms of officers present in the game, In my opinion, each of the examples given below has the same uniform, the final appearance of which depends on the rank, division or formation to which they belong (fleet, ground forces or intelligence).
 
Some Examples:
 
Keeper from Imperial Inteligence

 
Navy officers
 

 
Lieutenent Sylas


 
Captain Orzik
 


 
Rycus Kilran

 
I working now on  pyhsical model of basic tunic (Keeper model) then I will make others insignia .
 
 
 

Hi. I would like to present to you, reference photos of the uniforms of officers present in the game, In my opinion, each of the examples given below has the same uniform, the final appearance of which depends on the rank, division or formation to which they belong (fleet, ground forces or intelligence).
 
Some Examples:
 
Keeper from Imperial Inteligence

 
Navy officers
 

 
Lieutenent Sylas


 
Captain Orzik
 


 
Rycus Kilran

 
I working now on  pyhsical model of basic tunic (Keeper model) then I will make others insignia .
 
 
 

Hi. Best staff from Philoprops in my opinion if you want buy. But if you want make by your self it possible two.
on forum are guides How do rank bar or code cylinders
 

Hi. Best staff from Philoprops in my opinion if you want buy. But if you want make by your self it possible two.
on forum are guides How do rank bar or code cylinders
 

This set looks better in my opinion.
 
Clandestine Officer Armor Set