Seth

Hi everyone, I'm working on a LT-319 costume build, the IIO officer from Star Wars Rebels.
 

 
Most of the character's top half can be seen in the episode he was in but no full shots of the lower half are available for the specific character.
 

 

 

 
There are shots of his colleagues but I'm not sure if the LMO/DLs would allow using these as proxy for LT-319's lower half.
 

 

 

 

 

 

 
I have the 3D models for the chest and headpieces ready for printing but I wanted to get the detachment's input first before proceeding with the project. Any help will be much appreciated!
 
Marc
IC-43210
 

 

 

 

This was originally submitted on the main forum mid last year and has been since Updated.
 
Character: Field Agent Yssane Isard
Context: Star Wars: Agent of the Empire Vol. 2
 
Below are the only Available References from the comic:


 
Model Danielle A Balanga
TKID: 42366
Philippine Garrison
Cebu Scarif Squad
 
Front

Back

 
Proposed CRL:
Description: ISB Field Agent Ysanne Isard
Prefix: ID
Detachment: Imperial Officer Corps 
Context: Star Wars: Agent of the Empire Vol.2
Following her father’s footsteps, Ysanne Isard served as an Imperial Officer, a field agent for the Imperial Security Bureau. She climbed the ranks to eventually become the Director of Imperial Intelligence. Isard is a close confidante of the Emperor, helping shape much of his governance. She is ambitious, ruthless and will resort to any means necessary to get ahead of her enemies. Cold and calculating, she will use everything from brute force to a charm offensive in her quest for power.
The 501st approval requirements are listed in black.

The Imperial Officer Corp Detachment defines additional, optional levels of costuming excellence. In the page below, items listed in blue are optional features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume. Level 3 clearance submissions should match the configuration of an 'on screen' / named officer. 
 
For 501st membership only the requirements in black need to be met.
Required Costume Components
 
The following costume components are present and appear as described below.
 
 
Hair
For 501st approval:
•    Isard's Hair is black and straight, parted in the middle, shoulder-length.
•    The bangs are white.
•    This can either be a wig, or natural hair dyed black and white.
For level two certification (if applicable):
•    Hair must look natural, and styled in a way to not give the appearance of a wig.
Brown Red Lipstick
For 501st approval:
•    A shade of brownish red lipstick is to be worn, darker than natural lip color
 

Tunic, White
For 501st approval:
•    Fabric is a medium weight suiting material exactly matching the pants.
-Gabardine style weave is most accurate.
•    Tunic is double-breasted with a left over right closure on the tapered yoke.
•    Yoke comes up across the shoulder to the top shoulder seam.
•    The standing collar has square corners and is about 1.25" (31.8 mm) tall.
Collar closes snugly and stands with modesty panel
Collar edges are secured together
•    There are code cylinder pockets on both outside panels of the jacket from about half way between the top and bottom on the arm hole.
•    Sleeves are long, and without decoration, cuffs or buttons, cuts off at the wrist.
•    Sleeves contain 2 seams.
-One along the bottom and one along the back.
•    Tunic is constructed with no top-stitching (stitches visible on the exterior surface of fabric) 
•    Princess seams are optional for the ISB Isard tunic
For level two certification (if applicable):
•    There is a dart of about 2" (50.8 mm) in the top center of the yoke 
•    There is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt.
•    The back of the tunic has princess seams that run vertically and turn outward to intersect the arm-hole seam at the vertical center.
For level three certification (if applicable):
•    Tunic is secured on the right side by snaps or buttons.
•    Not hook and loop fastener (Velcro).
•    There is no top-stitching visible anywhere.
•    A lining is sewn in.
 
 
Ysanne's Rank Bar
For 501st approval:
•    See the Imperial Rank Bar page for more information.
•    Worn on the left side of the tunic over the heart.
•    Rank consists of colored plastic tiles mounted on metal bar.
•    Each bar is 1" (25.4 mm) height, length is determined by chosen rank.
•    Rank tile dimensions are 1/2" (12.7 mm)width x 3/4" (19 mm) height and about 1/8" (3.2 mm).
•    Tiles are mounted with 1/4" (6.4 mm) spaces between them.
•    Rank bar top row consists of six red tiles.
•    Rank bar bottom row consists of six blue tiles. 

For level two certification (if applicable):
•    Rank Bar is constructed with two separate strips, one atop the other, meeting together flush.
For level three certification (if applicable):
•    Rank consists of colored plastic push buttons mounted on a metal bar.
 
 
Belt
For 501st approval:
•    The belt is constructed from a non-textured leather or a leather-like material.
•    Approximately 2" (50.8 mm) in width, up to 3" (76.2 mm) is acceptable.
•    There are no loops on the belt.
•    A single large snap or rivet is visible approximately 1" (25.4 mm) from the buckle.
-The belt may be worn with the snap to the right or left of the wearer.
•    The buckle is constructed from a horizontally brushed metal, or metal looking material.
•    The buckle size is approximately 2 5/8" (66.7 mm) high and 4 1/8" (104.5 mm) wide with 0.5" (12.7 mm) radius rounded corners.
•    Buckle is adorned with an Imperial Code Disk at the center.
Please refer to the Imperial Buckle reference page for information on accurate and inaccurate style buckles.
For level two certification (if applicable):
•    Belt is made of leather.
•    Snap is worn to the left of the wearer.
•    Buckle has a slight horizontal curve.
 
Jodhpur Trousers, Black
For 501st approval:
•    Fabric is a medium weight suiting material exactly matching the tunic.
Gabardine style weave is most accurate.
•    Flared riding breeches with semi-stiff flares to the hip/thigh area.
•    Pockets are acceptable, only if hidden by the tunic.
•    Trouser legs are tucked into boots. 
 
 
Officer Boots
For 501st approval:
•    Knee-high, black, lace-less, smooth non-textured, leather or leather-like material.
-Rubber is not acceptable.
-PVC or synthetic material is allowed as long as it gives the appearance of leather.
•    There are no stretch panels, buckles, snap tabs, or decoration.
•    Boots have conservative heels.
•    If zippers are present, they are hidden on the inner part of the boot shaft.
-Not visible from the front, side or back.
•    The top of the boots may be flat or Spanish Style, but not Cowboy or Super Hero (pointed at the front) style. 
For level two certification (if applicable):
•    Boots do not have a zipper.
For level three certification (if applicable):
•    Boots are made of leather.
-Not vinyl or PVC.
•    Exact replicas of English riding (dress) boots or Equestrian boots.
Optional Accessories
Items below are optional costume accessories. These items are not required for approval, but if present appear as described below.
 
 
Ysanne's eyes
For 501st approval:
•    One red and one blue contact lens.
•    This style of contact lens may be worn, if desired.
-While encouraged to complete the look of this character, the contact lens requirement will be waived for 501st acceptance, if the applicant cannot wear contact lenses for health related reasons.
-All persons utilizing contact lenses are encouraged to first see their optometrist for a fitting. 
 
Grey Folder
For 501st approval:
•    Pale grey legal sized folder (14x8.5 inches) with no decoration on the exterior
ISB Ysanne Isard- Draft 4.pdf

Imperial Officers represented at this years Sinulog Festival in the Island of Cebu in the Philippines. Members from Singapore, Indonesia, Malaysia, Hong Kong, Czech Republic joined Cebu Scarif Squad and the Philippine Garrison in the grueling 8km parade. We were required to be in position in full costume at 0300H. Parade started at 0900H. We got drenched but we stood our ground. We finished the parade route at 1600H and returned to base exhausted but in good spirits by 1800H. No injuries or casualties to report. Long live the Legion!