diSparo
-
Posts
39 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by diSparo
-
-
So, next project, republic Medic
- AdmiralJag, shadan and chicken45
-
3
-
Finally!
Unfortunately, I will probably no longer be able to take photos this year.
This weekend I wear it for the RL, since then with beard, so not CRL suitable. -
Well, if it has to be a "bastard officer", there is no reason to ban the beard, because "clones don't wear beards", but my costume must not represent a clone.
-
Maybe I should have asked Albin what he thinks about it.
-
Give fools power.
I'm really starting to feel like taking back the CRL and wearing the Kamino Clone Medic in the Rebel Legion. -
Why was the name of the costume changed?
This clone is not a simple medic, nor does he bear the sign of the medical corps. In determining the name, I deliberately established its direct affiliation to Kamino and the production facilities. -
So once again the complete text.
Hair and face
Even if the clones are delivered by Kamino in impeccable, clean-shaven condition, all clone units try to look as individual as possible. So theoretically any kind of hairstyle, hair color, beard, tattoo (preferably with reference to the GAR or Republic), piercings is conceivable.
However, it should be ensured that hair and jewelry are still wearable under a helmet. No long hair, no long beard.
As a soldier in active service, all kinds of scars and prostheses in the facial area are also conceivable.
cap, white
Cloth is a medium-weight suit material that matches the tunic and pants perfectly.
Weaving in gabardine style is the most accurate.
Color matched to tunic and trousers.
The base of the hat is tapered, with a crown approximately 4" (101.6mm) high.
Front and rear "flaps" overlap at the sides and are approximately 4 inches (101.6mm) high.
The front beak extends down 3 inches and is decorated with (5) (6) or (7) concentric stitches.
Imperial Code Disk in the center of the front vertical "flap".
At the bottom of the front flap there is a red stripe 1.5cm wide, the same red as the stripes on the sleeves.
OPTIONAL Level 2 Certification (if applicable):
The code disc has a notch on the outermost disc.
OPTIONAL Level 3 Certification (if applicable):
Code Disk exactly matches the prop used by the screen.
tunic
White fabric is a mid-weight suit fabric that matches the pants perfectly.
The tunic is double breasted with a left over right closure at the tapered yoke.
The yoke extends over the shoulder to the upper shoulder seam.
The stand-up collar has square corners with a left-over-right center closure.
The collar contains a modesty panel.
The tunic has medium gray matt satin piping.
On each shoulder are rectangular epaulettes in the same gray as the piping.
The epaulettes have the dimensions 12.5cm x 7cmThe sleeves are long and without cuffs or buttons.
Sleeves contain 1 seam, on the inside.
On both sleeves there are two rank bands made of gray faux leather in the same gray as epaulettes and piping.
The tunic is constructed without topstitching (seams are visible on the outer surface of the fabric).
The back of the tunic has a seam that runs down the center of the tunic from the neck to the hem.
There is a slit on the back of the tunic that runs from belt level to the floor.
On the outside of the sleeves, two parallel red stripes, as wide as the rank stripes, run the length of the sleeve from the epaulette to the cuff. The total width of the two stripes ends with the width of the epaulette.
On the right chest is the Kamino Doctors patch.
OPTIONAL Level 2 Certification (if applicable):
•The collar is approximately 3.175 cm (1.25") to 6.35 cm (2.5")
OPTIONAL Level 3 Certification (if applicable):
• Tunic fastens on the right side with snaps or buttons.
• No stitching is visible anywhere.
• A lining is sewn in.
• The shoulder lines look very straight.
trousers
White fabric is a medium weight suiting fabric that matches the tunic perfectly.
The trouser legs are straight, without rider flaps, and are worn tucked into the boots.
Pockets are acceptable but must not be visible when the tunic is on.
rank bar
The rank bar is worn on the left side of the tunic over the piping.
Rank consists of colored plastic tiles mounted in a frame panel.
The rankbar consists of three tiles in a row, one blue tile on the right and two red tiles on the left.
OPTIONAL Level 2 Certification (if applicable):
The bar is approximately 1⅛" (28.6 mm) high.
The length of the frame plate is approximately 6 cm (2⅓") wide
The dimensions of the rank plates are approximately ⅝" (16 mm) wide x ⅞" (22 mm) high.
Belt
The belt is made from a non-textured brown leather or leather-like material in the same brown as the boots and is approximately 51mm wide.
•There are no loops on the belt.
•The buckle has rounded corners and is made of a horizontally brushed metal or metal-like material.
The buckle is embellished with a Republican code disc in the center.
•The code disc is a stepped cone shape that looks like 2 discs stacked on top of each other. • The larger disc is 1.4 inch (3.5 cm) and the smaller disc is 1 inch (2.5 cm).
Boots
The boots are made of brown leather or leather-like material, the same brown as the belt.
If stretch inserts or zippers are present, they must be hidden on the inner shaft.
Boots have a wider arch on either side of the ankle.
The upper edge of the shaft is shaped as a cuff.
OPTIONAL Level 2 Certification (if applicable):
Boots do not have a zipper.
Boots are made of leather.
Optional
gloves
Gloves are made of brown leather or leather-like material, the same brown as boots and belts.
Gloves can be plain or have 3 stitch lines on the back of the hand.
DC-15S blaster
Manufactured by BlasTech Industries, the DC-15S is smaller than the DC-15A blaster rifle. Although it has a shorter range than the "A" model, it is easier to handle with a higher rate of fire. It features a folding stock for braced shooting.
Realistic clone style DC-15S blaster.
Blaster can be custom built out of plastic, wood, metal or cast in resin.
Blaster has realistic Episode II or Episode III details:
wire frame sight.
Collapsible storage.
Twelve (12) radiator fins evenly spaced along the length of the cylinder.
Igniter detail buttons.
Load the magazine clip on the right.
The overall length is approximately 26" (66 cm).
Due to the scaling, the Hasbro version is wrong.
OPTIONAL Level 2 Certification (if applicable):
The detail of the loading magazine on the clip is gun metal color gun metal.
Detail studs and screws are gun metal gray in color.
Ignition knobs have some copper tint.
Blaster is weathered.
OPTIONAL Level 3 Certification (if applicable):
Working blue LED is installed in the barrel.
-
Oh I forgot the dimensions of the epaulettes.
The epaulettes have the dimensions 12.5cm x 7cm
-
Here I have new photos as the LMO require, clean shaven.
https://photos.app.goo.gl/sU4GFDH5WA27BfDx6
and because I think it's bullshit to shave a clone, an extension to the CRL text:
Hair and face
Even if the clones are delivered by Kamino in impeccable, clean-shaven condition, all clone units try to look as individual as possible. So theoretically any kind of hairstyle, hair color, beard, tattoo (preferably with reference to the GAR or Republic), piercings is conceivable.
However, it should be ensured that hair and jewelry are still wearable under a helmet. No long hair, no long beard.
As a soldier in active service, all kinds of scars and prostheses in the facial area are also conceivable.
-
Since the whole uniform is based on that of the BDM, I would identify the strap as the "Sturmriemen". As far as I know, they were always the same width, regardless of the size of the cap to which they were attached.
-
Hello, I am posting here the first draft of a CRL for the "Camino Clone Medic" for discussion.
The images for this can be seen in the linkcostume pics
https://photos.app.goo.gl/UcUjjSTv69CJMorZASource photo
https://photos.app.goo.gl/FHAMd9sXrMmzqGtYA
Detail photo
https://photos.app.goo.gl/BwkBzEG8VnceJWg76
cap, white
Cloth is a medium-weight suit material that matches the tunic and pants perfectly.
Weaving in gabardine style is the most accurate.
Color matched to tunic and trousers.
The base of the hat is tapered, with a crown approximately 4" (101.6mm) high.
Front and rear "flaps" overlap at the sides and are approximately 4 inches (101.6mm) high.
The front beak extends down 3 inches and is decorated with (5) (6) or (7) concentric stitches.
Imperial Code Disk in the center of the front vertical "flap".
At the bottom of the front flap there is a red stripe 1.5cm wide, the same red as the stripes on the sleeves.
OPTIONAL Level 2 Certification (if applicable):
The code disc has a notch on the outermost disc.
OPTIONAL Level 3 Certification (if applicable):
Code Disk exactly matches the prop used by the screen.
tunic
White fabric is a mid-weight suit fabric that matches the pants perfectly.
The tunic is double breasted with a left over right closure at the tapered yoke.
The yoke extends over the shoulder to the upper shoulder seam.
The stand-up collar has square corners with a left-over-right center closure.
The collar contains a modesty panel.
The tunic has medium gray matt satin piping.
On each shoulder are rectangular epaulettes in the same gray as the piping.
The sleeves are long and without cuffs or buttons.
Sleeves contain 1 seam, on the inside.
On both sleeves there are two rank bands made of gray faux leather in the same gray as epaulettes and piping.
The tunic is constructed without topstitching (seams are visible on the outer surface of the fabric).
The back of the tunic has a seam that runs down the center of the tunic from the neck to the hem.
There is a slit on the back of the tunic that runs from belt level to the floor.
On the outside of the sleeves, two parallel red stripes, as wide as the rank stripes, run the length of the sleeve from the epaulette to the cuff. The total width of the two stripes ends with the width of the epaulette.
On the right chest is the Kamino Doctors patch.
OPTIONAL Level 2 Certification (if applicable):
•The collar is approximately 3.175 cm (1.25") to 6.35 cm (2.5")
OPTIONAL Level 3 Certification (if applicable):
• Tunic fastens on the right side with snaps or buttons.
• No stitching is visible anywhere.
• A lining is sewn in.
• The shoulder lines look very straight.
trousers
White fabric is a medium weight suiting fabric that matches the tunic perfectly.
The trouser legs are straight, without rider flaps, and are worn tucked into the boots.
Pockets are acceptable but must not be visible when the tunic is on.
rank bar
The rank bar is worn on the left side of the tunic over the piping.
Rank consists of colored plastic tiles mounted in a frame panel.
The rankbar consists of three tiles in a row, one blue tile on the right and two red tiles on the left.
OPTIONAL Level 2 Certification (if applicable):
The bar is approximately 1⅛" (28.6 mm) high.
The length of the frame plate is approximately 6 cm (2⅓") wide
The dimensions of the rank plates are approximately ⅝" (16 mm) wide x ⅞" (22 mm) high.
Belt
The belt is made from a non-textured brown leather or leather-like material in the same brown as the boots and is approximately 51mm wide.
•There are no loops on the belt.
•The buckle has rounded corners and is made of a horizontally brushed metal or metal-like material.
The buckle is embellished with a Republican code disc in the center.
•The code disc is a stepped cone shape that looks like 2 discs stacked on top of each other. • The larger disc is 1.4 inch (3.5 cm) and the smaller disc is 1 inch (2.5 cm).
Boots
The boots are made of brown leather or leather-like material, the same brown as the belt.
If stretch inserts or zippers are present, they must be hidden on the inner shaft.
Boots have a wider arch on either side of the ankle.
The upper edge of the shaft is shaped as a cuff.
OPTIONAL Level 2 Certification (if applicable):
Boots do not have a zipper.
Boots are made of leather.
Optional
gloves
Gloves are made of brown leather or leather-like material, the same brown as boots and belts.
Gloves can be plain or have 3 stitch lines on the back of the hand.
DC-15S blaster
Manufactured by BlasTech Industries, the DC-15S is smaller than the DC-15A blaster rifle. Although it has a shorter range than the "A" model, it is easier to handle with a higher rate of fire. It features a folding stock for braced shooting.
Realistic clone style DC-15S blaster.
Blaster can be custom built out of plastic, wood, metal or cast in resin.
Blaster has realistic Episode II or Episode III details:
wire frame sight.
Collapsible storage.
Twelve (12) radiator fins evenly spaced along the length of the cylinder.
Igniter detail buttons.
Load the magazine clip on the right.
The overall length is approximately 26" (66 cm).
Due to the scaling, the Hasbro version is wrong.
OPTIONAL Level 2 Certification (if applicable):
The detail of the loading magazine on the clip is gun metal color gun metal.
Detail studs and screws are gun metal gray in color.
Ignition knobs have some copper tint.
Blaster is weathered.
OPTIONAL Level 3 Certification (if applicable):
Working blue LED is installed in the barrel.
-
Cedric hab ich schon gefragt, der hat keins.
-
Hello officer comrades. I'm looking for a pattern for a republican fleet officer, does anyone have a source where I can find something like this?
Republic Medic / formerly Kamino Clone Medic
in New CRLs - Completed
Posted
Probably something else will come before that, but after today's Andor episode I realized that the governor could be a good match for me. Appearance, figure, beard, that would suit me. Just need a little white in the hair.