AdmiralJag

This is my Andor style Trench Coat. Thanks to the new CRL, I will now also need a new White tunic.
 

That looks great! Very nice fabric as well

Hello Everyone～
 
I have finished my dress!
 
Please confirm thank you~
Also I found different details, the buttons used originally. But this time using trouser hooks.
 
Let me know if improvements are needed, hopefully I can finish this New CRLs.
 
Thank you all.
 
https://photos.app.goo.gl/KQWMLBYAwMoK1xwc7
 
 
 

Yes I think this version is the standard "feldgrau" uniform, as he was part of imperial army.
 
@Bowrider This screen grab was from Episode 4 (Aldhani), hope this helps. 
I'm liking this poncho version as well.

Yes I think this version is the standard "feldgrau" uniform, as he was part of imperial army.
 
@Bowrider This screen grab was from Episode 4 (Aldhani), hope this helps. 
I'm liking this poncho version as well.

I think this uniform is green. This officere was wearing green in previous episodes. BTW which Episode of Andor was this screen grab from? Thanks. Am going to to be making this version of the Poncho. Cheers!

Updated rank bar photo and code cylinders.
I have not yet added a restriction of "Only 2 blue tiles". Discuss.
I also restricted the code cyls down to "you have to have two, one on each side." Discuss. 
 
 
 
Rank Bar See the Imperial Rank Bar page for a list of allowed ranks. Rank consists of colored plastic tiles mounted on a single or double metal or metal looking bar(s). Worn on the left side of the tunic over the heart, aligned with the code cylinder pocket. Each bar is approximately 1 inch (25.4 mm) to 1.25 inches (31.75 mm) in height. Length is determined by chosen rank. Rank tile dimensions and spacing are appropriate and proportional to the sizing of the bar to allow for even spacing from each other and the border of the bar: Rogue One/Solo style rank tile dimensions are approximately 0.59 inches (15 mm) wide, 0.82 inches (21 mm) tall, and 0.12 inches (3.2 mm) deep. Original Trilogy/Mandalorian style rank tile dimensions are approximately 0.5 inch (12.7 mm) wide, 0.75 inch (19 mm) tall, and 0.125 inch (3.2 mm) deep. Rank tile sizes must all be of the same style and are not to be intermixed. Please note that final dimensions of the bar may be proportional to the wearer. Rank bar corners are a hard 90 degree angle, or slightly rounded. Rank tiles are translucent, rectangular, positioned side by side in a vertical orientation, and evenly spaced. No amber/yellow tiles are present for ISB agents. Color, quantity, and combinations of the tiles/bars are determined by rank and are appropriate to uniform type/color as supported by licensed reference.  
OPTIONAL Level two certification (if applicable): Rank consists of colored plastic push buttons (with white to off white insert) mounted on a metal bar. OPTIONAL Level three certification (if applicable): Chosen rank to match a specific officer seen onscreen or other licensed media.  
   
Code Cylinders Two Code Cylinders per costume may be worn. No more than one code cylinder per pocket. Dosimeter style with correct silver clip (no brass) and Blue top.    
OPTIONAL Level two certification (if applicable):
*Only real or replica dosimeters are used.

Don't worry about the badge pic, @AdmiralJag, we got it already. 

I have some light gray fabric (in a wool twill) which I'm hoping will be suitable, i will share photos on here asap, 
I'd like to have a go at making this costume, if I can. I need to upload some WIP pics when I get the chance. 
 
I also have the rank bar (x2 blue squares) I'll share a pic of that as well. 

First draft.
Spoiler: it's ISB but with some tweaks.
I think we should talk about which ranks are allowed on the attendants. We only see them with 2 blue cubes. 
Do we only allow 2 blue cubes for them?
After that, we just need photos of the tunic.
 
 
Description: Imperial Security Bureau Attendant
Prefix: ID
Detachment: Imperial Officer Corps
Context: Andor
ISB Attendants are junior officers of the Imperial Security Bureau who serve as assistants to ISB Supervisors. They were delegated various responsibilities by their commanding officers, but sometimes also held specific appointments, such as manning the ISB datavault. The ISB Attendants worked in the ISB Central Office on Coruscant, often within the offices of their superiors.
 
  Imperial Hat, Black Hat is OPTIONAL but only if a specific referenced licensed character’s typical uniform configuration is copied in full, and does not typically include a hat. Fabric is a medium weight suiting material matching the pants and tunic if applicable. Cavalry Twill or a Gabardine style weave is most accurate. Base of the hat is conical, with a crown about 4 inches (101.6 mm) tall. Front and rear “flaps” overlap on the sides, with the back flap over the front, and are about 4 inches (101.6 mm) high. Front bill extends 3 inches (76.2 mm) down, decorated with five (5), six (6) or seven (7) concentric stitches. Imperial Code Disk is positioned in the center of the front vertical flap.  
OPTIONAL Level two certification (if applicable): Code disk has NO notch in the outermost disk.  
   
 
[[|200x150px]] Tunic Fabric should be a medium weight, gray suiting material. Tunic is double-breasted with a left over right closure on the tapered yoke. Yoke comes up across the shoulder to the top shoulder seam. The standing collar has square corners and is between 1.25 inches (31.8 mm) to 2 inches (50.8 mm) tall dependent on wearer’s neck size. Collar closes snug. Modesty panel is OPTIONAL. Collar edges are closed with two (2) eye hooks. There are code cylinder pockets on both outside panels of the jacket from about halfway between the top and bottom on the arm hole. Sleeves are long, and without decoration, cuffs, or buttons. Sleeves contain 2 seams; one along the bottom and one along the back. Tunic is constructed with no top-stitching (stitches visible on the exterior surface of fabric). Hook and eye fasteners on the uniform should not be visible. Optional: Up to two (2) hooks may be added through the sides of the tunic to hold belt in place. Hooks must be black.  
OPTIONAL Level two certification (if applicable): There is a dart of about 2 inches (50.8 mm) in the top center of the yoke. There is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt. The back of the tunic has princess seams that run vertically and turn outward to intersect the arm-hole seam at the vertical center. OPTIONAL Level three certification (if applicable): Tunic is secured on the right side by snaps, hook, & bar, buttons, or unseen magnets; not hook and loop fastener (Velcro). A lining is sewn in.  
   
Rank Bar See the Imperial Rank Bar page for a list of allowed ranks. Rank consists of colored plastic tiles mounted on a single or double metal or metal looking bar(s). Worn on the left side of the tunic over the heart, aligned with the code cylinder pocket. Each bar is approximately 1 inch (25.4 mm) to 1.25 inches (31.75 mm) in height. Length is determined by chosen rank. Rank tile dimensions and spacing are appropriate and proportional to the sizing of the bar to allow for even spacing from each other and the border of the bar: Rogue One/Solo style rank tile dimensions are approximately 0.59 inches (15 mm) wide, 0.82 inches (21 mm) tall, and 0.12 inches (3.2 mm) deep. Original Trilogy/Mandalorian style rank tile dimensions are approximately 0.5 inch (12.7 mm) wide, 0.75 inch (19 mm) tall, and 0.125 inch (3.2 mm) deep. Rank tile sizes must all be of the same style and are not to be intermixed. Please note that final dimensions of the bar may be proportional to the wearer. Rank bar corners are a hard 90 degree angle, or slightly rounded. Rank tiles are translucent, rectangular, positioned side by side in a vertical orientation, and evenly spaced. No amber/yellow tiles are present for ISB agents. Color, quantity, and combinations of the tiles/bars are determined by rank and are appropriate to uniform type/color as supported by licensed reference.  
OPTIONAL Level two certification (if applicable): Rank consists of colored plastic push buttons (with white to off white insert) mounted on a metal bar. OPTIONAL Level three certification (if applicable): Chosen rank to match a specific officer seen onscreen or other licensed media.  
   
Code Cylinders Two Code Cylinders per costume may be worn. No more than 1 code cylinders per pocket. Dosimeter style with correct silver clip (no brass) and Blue top.    
OPTIONAL Level two certification (if applicable): Only real or replica dosimeters are used.  
   
 
Belt The belt is constructed from a black, non-textured, leather, or a leather-like material. Approximately 2 inches (50.8 mm) in width, up to 2.5 inches (63.5 mm) is acceptable. There are no loops on the belt. A single large snap or rivet is visible approximately 1 inch (25.4 mm) from the buckle. The belt may be worn with the snap to the right or left of the buckle. It is preferred to wear the snap to the left of the wearer, unless emulating a specific licensed character. The buckle is constructed from a horizontally brushed metal, or metal looking material. The buckle size is approximately 2.6250 inches (66.7 mm) high and 4.1250 inches (104.5 mm) wide with 0.5 inches (12.7 mm) radius rounded corners. Buckle is adorned with an un-notched Imperial Code Disk at the center. Please refer to the Imperial Buckle reference page for information on accurate and inaccurate style buckles.  
OPTIONAL Level two certification (if applicable): Belt is made of leather. Belt has a groove at the top and bottom edge along the length of the belt. Buckle has a slight horizontal curve.  
   
Jodhpur Trousers, Black Fabric is a medium weight suiting material matching the tunic. Cavalry Twill or a Gabardine style weave is most accurate. Version One trousers are flared riding breeches, with semi-stiff flares to the hip/thigh area. Breeches are worn with boots. Breeches are neatly pressed or ironed without creases. Pockets are acceptable, although must not be visible with the tunic on.  
 
 
Officer Boots Knee-high, black, riding style, lace-less, smooth non-textured, leather or leather-like material. There are no buckles, snap tabs, or decoration. Boots have conservative heels. A single stretch panel or zipper may be present, they are to be hidden on the inner part of the boot shaft. Not visible from the front, side or back. The top of the boots may be flat or Spanish Style, but not Cowboy or Super Hero (pointed at the front) style. A small V-shaped notch may be present on the back of the boots top.  
OPTIONAL Level two certification (if applicable): Boots can have a zipper. OPTIONAL Level three certification (if applicable): Boots are made of leather. Not vinyl or PVC. Exact replicas of English riding (dress) boots or Equestrian boots.  
   
 
Optional Accessories Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.
 
 
Belt boxes (Non-Saga style) Dimensions are approximately 2 inches (50.8 mm) wide, 3 inches (76.2 mm) tall and 1 inch (25.4 mm) thick. Two boxes to be worn vertically, one each on either side of the belt buckle.  
OPTIONAL Level two certification (if applicable): Belt boxes are made of metal or cast resin. If resin, corners have a "stepped 90-degree cutout" in the shake of a square on all four corners of the face of the box.  
   
Gloves Black, wrist length gloves constructed of a smooth, non-textured leather or leather-like material. Enclosed fingers. No buckles, straps, etc.  
OPTIONAL Level two certification (if applicable): Gloves have a plain back and no visible adornments. Gloves made of leather. Gloves end just past the wrist. OPTIONAL Level three certification (if applicable): Gloves have a notch centered in the edge below the palm. Slit may be straight or rounded.

We have been authorized to move forward with this costume by the LMO office.  Anyone that has a build in progress should contact us and we will assist them in completing the CRL for submission to the LMO office.

The pictures make this look like the tunic is new (it seems to have a center vent), but a few minutes later, we see another officer who does not have it.  

Thank you for uploading these references and CRL drafts, @chicken45   its so good to see the ISB getting all this attention in Andor  

Latest draft. I will get pictures of myself in the V2 this evening.
Also moved belt boxes to optional. Noted Andor boxes being made from resin and having the cutouts on each corner. 
Also restricted use of epaulets to ranks Major and above (min 5 cubes).
 
 
Imperial Hat, Black Hat is OPTIONAL but only if a specific referenced licensed character’s typical uniform configuration is copied in full, and does not typically include a hat. Fabric is a medium weight suiting material matching the pants and tunic if applicable. Cavalry Twill or a Gabardine style weave is most accurate. Base of the hat is conical, with a crown about 4 inches (101.6 mm) tall. Front and rear “flaps” overlap on the sides, with the back flap over the front, and are about 4 inches (101.6 mm) high. Front bill extends 3 inches down, decorated with 5, 6 or 7 concentric stitches. Imperial Code Disk is positioned in the center of the front vertical "flap.  
OPTIONAL Level two certification (if applicable): Code disk has NO notch in it, on the outermost disk.  
   
 
Tunic Fabric should be a medium weight, white suiting material. Tunic is double-breasted with a left over right closure on the tapered yoke. Yoke comes up across the shoulder to the top shoulder seam. The standing collar has square corners and is between 1.25" (31.8 mm) to 2" (50.8) tall dependent on wearers neck size Collar closes snug. Modesty panel is OPTIONAL. Collar edges are closed with two eye hooks. There are code cylinder pockets on both outside panels of the jacket from about half way between the top and bottom on the arm hole. Sleeves are long, and without decoration, cuffs or buttons. Sleeves contain 2 seams; one along the bottom and one along the back. Tunic is constructed with no top-stitching (stitches visible on the exterior surface of fabric) Hook and eye fasteners on the uniform should not be visible.  
OPTIONAL Level two certification (if applicable): There is a dart of about 2" (50.8 mm) in the top center of the yoke. There is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt. The back of the tunic has princess seams that run vertically and turn outward to intersect the arm-hole seam at the vertical center. OPTIONAL Level three certification (if applicable): Tunic is secured on the right side by snaps, hooks, buttons, or unseen magnets; not hook and loop fastener (Velcro). There is no top-stitching visible anywhere. A lining is sewn in.  
   
Rank Bar See the Imperial Rank Bar page for more information. Rank consists of colored plastic tiles mounted on a single or double metal or metal looking bar(s). Worn on the left side of the tunic over the heart, aligned with the code cylinder pocket. Each bar is approximately 1 inch (25.4 mm) to 1.25 inches (31.75 mm) in height. Length is determined by chosen rank. Rank tile dimensions and spacing are appropriate and proportional to the sizing of the bar to allow for even spacing from each other and the border of the bar: Rogue One/Solo rank tile dimensions are approximately 15 mm wide, 21 mm tall, and 3.2 mm deep. Original Trilogy/Mandalorian rank tile dimensions are approximately ½ inch (12.7 mm) width x ¾ inch (19 mm) height x 1⁄8 inch (3.2 mm) deep. Rank tile sizes must all be of one or the other — Not to be intermixed. Please note that final dimensions of the bar may be proportional to the wearer. Rank bar corners are a hard 90 degree angle, or slightly rounded. Rank tiles are translucent, rectangular, positioned side by side in a vertical orientation, and evenly spaced. No amber/yellow tiles are present for ISB agents. Color, quantity, and combinations of the tiles/bars are determined by rank and are appropriate to uniform type/color as supported by licensed reference.  
OPTIONAL Level two certification (if applicable): Rank consists of colored plastic push buttons (with white to off white insert) mounted on a metal bar. OPTIONAL Level three certification (if applicable): Chosen rank to match a specific officer seen onscreen or other licensed media.  
   
Code Cylinders One or two Code Cylinders per costume may be worn. Dosimeter style with correct silver clip (no brass) and blue top. If only one is worn, it is on the left side. The right code cylinder can be the "X Tool version" if a dosimeter style is present on the left side. One may be worn in the right pocket if the other type is present in the left pocket. Rod Style: Machined aluminum rod with flaring disc detail at top. Ysanne Isard, Code Cylinders are not required.    
OPTIONAL Level two certification (if applicable): Only real or replica dosimeters are used.  
   
 
Belt The belt is constructed from a non-textured leather or a leather-like material. Approximately 2" (50.8 mm) in width, up to 3" (76.2 mm) is acceptable. There are no loops on the belt. A single large snap or rivet is visible approximately 1" (25.4 mm) from the buckle. The belt may be worn with the snap to the right or left of the wearer. The buckle is constructed from a horizontally brushed metal, or metal looking material. The buckle size is approximately 2 ⅛" (66.7 mm) high and 4 ⅛" (104.5 mm) wide with 0.5" (12.7 mm) radius rounded corners. Buckle is adorned with an Imperial Code Disk at the center. Please refer to the Imperial Buckle reference page for information on accurate and inaccurate style buckles.  
OPTIONAL Level two certification (if applicable): Belt is made of leather. Snap is worn to the left of the wearer. Buckle has a slight horizontal curve.  
   
Jodhpur Trousers, Black, Version One Fabric is a medium weight suiting material matching the tunic. Cavalry Twill or a Gabardine style weave is most accurate. Version One trousers are flared riding breeches, with semi-stiff flares to the hip/thigh area. Breeches are worn with boots. Breeches are neatly pressed or ironed without creases. Pockets are acceptable, although must not be visible with the tunic on.  
 
Trousers, Black, Version Two Fabric is a medium weight suiting material matching the tunic. Cavalry Twill or a Gabardine style weave is most accurate. Version Two trousers are straight leg in style, without cuffs, and rest on the top of the shoes without bunching or giving any sloppy appearance. Trousers are neatly pressed or ironed with crease lines in the front and back. Pockets are acceptable, although must not be visible with the tunic on.  
 
 
Officer Boots, Version One Knee-high, black, riding style, lace-less, smooth non-textured, leather or leather-like material. There are no buckles, snap tabs or decoration. Boots have conservative heels. A single stretch panel or zipper may be present, they are to be hidden on the inner part of the boot shaft. Not visible from the front, side or back. The top of the boots may be flat or Spanish Style, but not Cowboy or Super Hero (pointed at the front) style. A small V-shaped notch may be present that the back of the boots top.  
OPTIONAL Level two certification (if applicable): Boots do not have a zipper. OPTIONAL Level three certification (if applicable): Boots are made of leather. Not vinyl or PVC. Exact replicas of English riding (dress) boots or Equestrian boots.  
   
Officer Shoes, Version Two Black, smooth non-textured, and made of leather or leather-like material. The shoes are void of all decoration. If shoes have laces they are hidden above the hem of the trousers. Shoes have a small conservative heel. Chelsea style boots are acceptable, subject to the same requirements as shoes. If worn, may only be paired with straight-leg trousers.  
OPTIONAL Level two certification (if applicable): Shoes are well shined.  
   
Optional Accessories Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.
 
 
Belt boxes (Non-Saga style) Dimensions are approximately 2 inches (50.8mm) wide by 3 inches (76.2 mm) tall by 1 inch x (25.4mm) thick. Two boxes to be worn vertically, one each on either side of the belt buckle.  
OPTIONAL Level two certification (if applicable): Belt boxes are made of metal or cast resin. If resin, corners have a "stepped cutout" in the shape of a square on all four corners on the face of the box.  
   
Gloves Black, wrist length gloves constructed of a smooth, non-textured leather or leather-like material. Enclosed fingers. No buckles, straps, etc.  
OPTIONAL Level two certification (if applicable): Gloves have a plain back and no visible adornments. Gloves made of leather. Gloves end just past the wrist. OPTIONAL Level three certification (if applicable): Gloves have a notch centered in the edge below the palm. Slit may be straight or rounded.  
   
Epaulets, Silver Silver, colored strips, firmly attached on the edge of each shoulder. The strips are matte or metallic in finish and made with a semi-rigid to rigid material. The strips have a small, raised ridge around the edge. The strips are no more than 1.25 inches in width. Positioned across the collar bone where the shoulder begins, between the shoulder seam and yoke seam. Only to be worn with ranks of five tiles or more) The strips do not overlap the seams they sit between.  
OPTIONAL Level two certification (if applicable): The lower limit of the strip, in positioning, should run parallel to the lowest point of the center of the collar. OPTIONAL Level three certification (if applicable): Have a metallic sheen.  
   
 
Holster Made of black leather or leather-like material.  
OPTIONAL Level two certification (if applicable): Holster is affixed via a single loop over the belt. Holster is made of leather.  
   
SE-14R Light Repeating Blaster The barrel detailing is evident with the cocking lever and slider in place. The ejection port is also evident. The scope mount looks similar to the magazine but smaller in size. The scope does not protrude past the blaster body.  

Sure looks like a V2, baby! STRAIGHT PANTS AND CHELSEA BOOTS!
 

Probable magnets:
 

X tool. click for spoilers
 
https://www.imperialofficer.com/forum/index.php?/gallery/image/956-videoscreenshot-disneyplus-starwarsandor-5’30”jpg/
 

Hooks:
 

tunic:
making modesty panel optional.
Allowing for snaps, clips, or magnetic closures
rank:
Adding new picture of badges.
 
code cyls:
Allowing for X Tool 
 
accessories:
Epaulettes only to be worn with 5 or 6 major or colonel ranks
removing belt box L2 requirement of boxes being made of metal. 
 
Looks like we have the social version of the ISB officer. I will get to work on a chelsea boot/straight leg pants version.
 

We definitely need this Trenchcoat as an addition! Do we have some good screencaps somewhere?

We need someone to capture photos and place them here.  Some were placed in the officers mess, but we need them here.

The construction of this coat is the same as the green coats with 4 sets of pockets.  They are NOT the same as the coats we see in Rogue One.

Get the photos here and we will have the LMOs take a look.

Here's an album of the trenchcoats
 

Updated text. 

Still need a picture of the trenchcoat. Anyone out there got one?
 
Imperial Hat, Black Hat is OPTIONAL but only if a specific referenced licensed character’s typical uniform configuration is copied in full, and does not typically include a hat. Fabric is a medium weight suiting material matching the pants and tunic if applicable. Cavalry Twill or a Gabardine style weave is most accurate. Base of the hat is conical, with a crown about 4 inches (101.6 mm) tall. Front and rear “flaps” overlap on the sides, with the back flap over the front, and are about 4 inches (101.6 mm) high. Front bill extends 3 inches down, decorated with 5, 6 or 7 concentric stitches. Imperial Code Disk is positioned in the center of the front vertical "flap.  
OPTIONAL Level two certification (if applicable): Code disk has NO notch in it, on the outermost disk.  
   
 
Tunic Fabric should be a medium weight, white suiting material. Tunic is double-breasted with a left over right closure on the tapered yoke. Yoke comes up across the shoulder to the top shoulder seam. The standing collar has square corners and is between 1.25" (31.8 mm) to 2" (50.8) tall dependent on wearers neck size Collar closes snug and includes a modesty panel behind closure. Collar edges are closed with two eye hooks. There are code cylinder pockets on both outside panels of the jacket from about half way between the top and bottom on the arm hole. Sleeves are long, and without decoration, cuffs or buttons. Sleeves contain 2 seams; one along the bottom and one along the back. Tunic is constructed with no top-stitching (stitches visible on the exterior surface of fabric) Hook and eye fasteners on the uniform should not be visible.  
OPTIONAL Level two certification (if applicable): There is a dart of about 2" (50.8 mm) in the top center of the yoke. There is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt. The back of the tunic has princess seams that run vertically and turn outward to intersect the arm-hole seam at the vertical center. OPTIONAL Level three certification (if applicable): Tunic is secured on the right side by snaps or buttons; not hook and loop fastener (Velcro). There is no top-stitching visible anywhere. A lining is sewn in.  
   
Rank Bar See the Imperial Rank Bar page for more information. Rank consists of colored plastic tiles mounted on a single or double metal or metal looking bar(s). Worn on the left side of the tunic over the heart, aligned with the code cylinder pocket. Each bar is approximately 1 inch (25.4 mm) to 1.25 inches (31.75 mm) in height. Length is determined by chosen rank. Rank tile dimensions and spacing are appropriate and proportional to the sizing of the bar to allow for even spacing from each other and the border of the bar: Rogue One/Solo rank tile dimensions are approximately 15 mm wide, 21 mm tall, and 3.2 mm deep. Original Trilogy/Mandalorian rank tile dimensions are approximately ½ inch (12.7 mm) width x ¾ inch (19 mm) height x 1⁄8 inch (3.2 mm) deep. Rank tile sizes must all be of one or the other — Not to be intermixed. Please note that final dimensions of the bar may be proportional to the wearer. Rank bar corners are a hard 90 degree angle, or slightly rounded. Rank tiles are translucent, rectangular, positioned side by side in a vertical orientation, and evenly spaced. No amber/yellow tiles are present for ISB agents. Color, quantity, and combinations of the tiles/bars are determined by rank and are appropriate to uniform type/color as supported by licensed reference.  
OPTIONAL Level two certification (if applicable): Rank consists of colored plastic push buttons (with white to off white insert) mounted on a metal bar. OPTIONAL Level three certification (if applicable): Chosen rank to match a specific officer seen onscreen or other licensed media.  
   
 
 
Code Cylinders 2 per costume may be worn one in each pocket Modified: silver "chalk holder" tube with short clip, top is colored Blue. Dosimeter style: True Dosimeter with correct clip and Blue top. Ysanne Isard, Code Cylinders are not required.  
OPTIONAL Level two certification (if applicable): Only real or replica dosimeters are used. Dosimeters have a silver, non-brass, clip  
   
 
Belt The belt is constructed from a non-textured leather or a leather-like material. Approximately 2" (50.8 mm) in width, up to 3" (76.2 mm) is acceptable. There are no loops on the belt. A single large snap or rivet is visible approximately 1" (25.4 mm) from the buckle. The belt may be worn with the snap to the right or left of the wearer. The buckle is constructed from a horizontally brushed metal, or metal looking material. The buckle size is approximately 2 ⅛" (66.7 mm) high and 4 ⅛" (104.5 mm) wide with 0.5" (12.7 mm) radius rounded corners. Buckle is adorned with an Imperial Code Disk at the center. Please refer to the Imperial Buckle reference page for information on accurate and inaccurate style buckles.  
OPTIONAL Level two certification (if applicable): Belt is made of leather. Snap is worn to the left of the wearer. Buckle has a slight horizontal curve.  
   
Belt boxes (Non-Saga style) Dimensions are approximately 2 inches (50.8mm) wide by 3 inches (76.2 mm) tall by 1 inch x (25.4mm) thick. Two boxes to be worn vertically, one each on either side of the belt buckle.  
OPTIONAL Level two certification (if applicable): Belt boxes are made of metal.  
   
Jodhpur Trousers, Black Fabric is a medium weight suiting material matching the tunic. Cavalry Twill or a Gabardine style weave is most accurate. Version One trousers are flared riding breeches, with semi-stiff flares to the hip/thigh area. Breeches are worn with boots. Breeches are neatly pressed or ironed without creases. Pockets are acceptable, although must not be visible with the tunic on.  
 
 
Officer Boots Knee-high, black, riding style, lace-less, smooth non-textured, leather or leather-like material. There are no buckles, snap tabs or decoration. Boots have conservative heels. A single stretch panel or zipper may be present, they are to be hidden on the inner part of the boot shaft. Not visible from the front, side or back. The top of the boots may be flat or Spanish Style, but not Cowboy or Super Hero (pointed at the front) style. A small V-shaped notch may be present that the back of the boots top.  
OPTIONAL Level two certification (if applicable): Boots do not have a zipper. OPTIONAL Level three certification (if applicable): Boots are made of leather. Not vinyl or PVC. Exact replicas of English riding (dress) boots or Equestrian boots.  
   
Optional Accessories Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.
 
Gloves Black, wrist length gloves constructed of a smooth, non-textured leather or leather-like material. Enclosed fingers. No buckles, straps, etc.  
OPTIONAL Level two certification (if applicable): Gloves have a plain back and no visible adornments. Gloves made of leather. Gloves end just past the wrist. OPTIONAL Level three certification (if applicable): Gloves have a notch centered in the edge below the palm. Slit may be straight or rounded.  
   
PICTURE CURRENTLY IN EDITING Epaulets, Silver Silver, colored strips, firmly attached on the edge of each shoulder. The strips are matte or metallic in finish and made with a semi-rigid to rigid material. The strips have a small, raised ridge around the edge. The strips are no more than 1.25 inches in width. Positioned across the collar bone where the shoulder begins, between the shoulder seam and yoke seam. The strips do not overlap the seams they sit between.  
OPTIONAL Level two certification (if applicable): The lower limit of the strip, in positioning, should run parallel to the lowest point of the center of the collar. OPTIONAL Level three certification (if applicable): Have a metallic sheen.  
   
NEED A PICTURE! Trenchcoat Made of a medium-weight waterproof fabric that is cream-ecru in color. Fabric has a matte finish. Two flares at the breast overlap and close in the front, left breast over right OR right over left. The collar continues around the neck and is approximately 3.5 inches wide. Characters presenting masculine from sources have left breast over right, characters presenting feminine from sources have right over left. Either is acceptable for a submission, as long as it is consistent through the costume A seam runs down the arm on the outside, it begins at the costumer’s collar. Two inch long cuffed sleeves with a single button towards the end of the cuff. The cuff “strap” ends in a chevron shape. On the back, the storm shield has a pinch pleat at the top center of the shoulders. The coat ends mid-calf and is straight cut along the bottom edge. The coat below the belt has a split seam in the back. Two pocket flaps may appear at the costumer’s hip, but are not required; if present, there should be no visible pocket stitching. The coat is worn either belted with the standard leather officer's belt, or loose.  
 
Holster Made of black leather or leather-like material.  
OPTIONAL Level two certification (if applicable): Holster is affixed via a single loop over the belt. Holster is made of leather.  
   
SE-14R Light Repeating Blaster The barrel detailing is evident with the cocking lever and slider in place. The ejection port is also evident. The scope mount looks similar to the magazine but smaller in size. The scope does not protrude past the blaster body.