ChrisLie

Finally got my Clothears tunic/hat/pants! Ordered September 2022 (received August 2023). Maybe time for ISB next?
 

Congratulations. I still waiting for my new uniform. Hope to apply soon.

Welcome, awesome picture and congratulations on your first troop as well 

Approved just in time for FanExpo Toronto, Ontario, Canada. August 24-27, 2023

On a DS hallway...
 

 
 
 
 

First draft of Andor Poncho text. Mostly a copy paste of the R1 version thus far.
 
Made of a black waxed cotton, or similar fabric. Top stitching thread is dark gray and visibly contrasts with poncho fabric. The closure is located at the costumer's right side. The collar overlaps and the opening is approximately 2.5 inches on the shoulder, going down at an approximate 45 degree angle to the bottom right of the yoke. The yoke is flush against the costumer and has a seam down the front center, this ends in a point. The edge of the poncho has approximately 1 inch seam around all edges. The collar is approximately 3 inches tall at the front and is top stitched with lines approximately every ¼ inch. The back of the poncho is flat across the back. The poncho voids at the edge of the costumers shoulders. The front of the poncho has a piece attached to the yoke but separate from the sides The front of the poncho has three lines of top stitching running parallel to the edge. The front extends down to just past the crotch area and is tucked in to the costumer's belt. There is a code cylinder pocket in which one or two code cylinders are worn. There are 2 pockets, but two code cylinders can be worn in the same pocket.

IN-4019 reporting for duty as ordered. 
 

Sent from my iPhone using Tapatalk

Thank you Christopher,
I hope that too. I thought it might be a good idea as you can always find great photos in the profiles of the members of this form.
 
Best regards
 

I'm still waiting for my uniform. But I was thinking of either a base, star destroyer or imperial arrest cruiser Cantwell class.
 
But awesome pictures Andreas.
 
Hope to see more people share pictures 

I got an idea from a YouTuber, buying a suitcase that has a foam you can cut an make room for the belt, cylinder, boxes and rank plaque. Maybe gloves too. I don't have much space, I do have a man-cave, but for Lego and my model trains. Haha. If I had a bit better space I probably would by a mannequin and a glass cabinet and put my uniform in there. I'm crazy enough to do it, just don't have space nor money for it at the moment 

This has been cleared by the LMO team.
START BUILDING!!

Also, especially for the green tunics, would not recommend mix and match vendors - this is a tricky color and once you start mixing and matching tunic/jodhpur, color might be off!
 
It's going to come down to fit as well - some people need to take the items from the tailor to get fitted better, some don't. Consider working with your GML once the items come in and see what they think!

No. Usually not. Unless it's doesn't fit you properly. But that's goes to all vendor.
 
As long everything looks in order and up to standard. It should be fine 

@ChrisLie was asking about this poncho:
https://www.etsy.com/no-en/listing/1466012193/imperial-officer-poncho-black-andor?ref=sfl_cart
 
We STILL don't have the Andor style ponchos in the CRLs yet. Is this the one?

Tror det blir fantastisk uansett.
Håper å snuble over dere i Sverige eller Norge ved anledninger uansett.
 
Gonna be awesome.

I’m here and ready to troop! Imperial Military Officer (non-saga). Very excited to costume as Tala Durith, even though though there’s no CRL for her exclusively. 
But I also must brag about my trench coat and Caf tumbler that add incredible amount of coolness at the same time that they keep me warm when it’s cold. I add an additional picture in comments. If anyone wishes for information about any costume details/accessories, feel free to ask. I’m extremely happy with all the vendors who have helped me making this dream come true. 
 
This summer has been very exciting for me as I have alsi been approved as TIE Reserve, Scanning Crew (in all 3 versions) and AT-ST driver. 

Can personally attest to the Denuo one too - it's a good weight, well made, and is very comfy.
Only downside is that the pockets aren't deep enough for your code cylinders, so you'll definitely need to get them adjusted.

Both Wampa and Denuo can be used here

Hey all, please be aware that the vendor RubberBlastersEtc should be avoided at all costs. They have been removed from every Legion forum and the proprietor banned from the Clubs due to confirmed previous conviction of the most severe type of criminal charges. Please DO NOT support this individual or recommend/link their page, and always research and check your Detachment/relevant forums for lists of vetted vendors and those to avoid BEFORE making any significant purchases. This is the former proprietor of Hyperfirm (yes, THAT ONE), so due to the sensitive nature of the topic, I am not inviting discussion but you can PM me if you have pressing concerns.
 
My goal is for the only thing to show up when people Google or search any 501st forum is a post clearly stating not to support this individual. It is potentially damaging to the IOC and Legion in general when members leave reviews citing their membership and support, and members should be strongly deterred to avoid the perception that the Legion in any way approves of or is affiliated with this vendor. Thank you.

I was looking at these too. They look nice. Hope they work for you.

https://www.magnoliclothiers.com/falcon-boots-p-598.html
 
Maybe this one works. Gonna try

I struggle with that problem myself 
Gonna look around. Following this post. Hoping for the best @Raynarde

Looks awesome