Angelus
-
Posts
658 -
Joined
-
Last visited
-
Days Won
33
Content Type
Profiles
Forums
Gallery
Posts posted by Angelus
-
-
I was shopping last night and I found this pattern looks alike as a base for the coat.
https://www.simplicity.com/burda-style-pattern-7142-coat-jacket/B7142.html -
9 minutes ago, Steven said:
I think it doesn't matter if it's a warmer country or not, being able to step out of the riding boots and into chelsea boots on a long day of trooping (ComicCon or so) is a relieve everywhere
THIS! LOL
-
You can try some of this.
The coat looks somewhat like this but you may have to redraw some parts to make it bigger (I never use this before)
https://www.lekala.co/catalog/men/coa/pattern/6030
or you can use this but there are alot more add on to work on ( I did use this as a base to work around it abit)
https://kwiksew.mccall.com/k4017
- darthikari and shagger999uk
-
2
-
-
18 hours ago, vonmoen said:
Makes me wonder if Beckett in an Officers uniform will go to the Underworld Detachment.
2 hours ago, trencher said:That sounds highly likely. Since he is more of a scoundrel character in the movie.
Do not think it will because his Officer outfit is what most of the officer in that part of the movie acted.
And for Beckett in underworld detacgment, his will be his main outfit he wore. -
44 minutes ago, Exaldear said:
So much? You just did it then. Other detachments do it. They are different uniforms, plain and simple. Plus he is unique and therefore not generic.
And if the game and movie must coexist then so must animated and film, so the differences between ISB movie and Yularen in Rebels should be overlooked.
Hask compared to the film uniforms is different, and compared to the generic is different, on that evidence alone it deserves it's on hero crl. Add the fact he is the main antagonist in the dlc then he deserves his own CRL.
He is a unique character like Krennic or Tarkin or Galen.
After all the comparing with the Film and game of design, as you said it is a different overall.
-
As what some have said on the early post.
Early on before Kis did build, I have a few looks on the ref design on Hask compare with the Generic Officer. Hask and the FO Generic Officer are different even from the design of the color and outfit. And Hask as a main character of the game, he can have his own CRL. -
That TLJ rank is the General rank like Hux. but Just that Hux have a different outfit and coat.
If to put it as Admiral/General, I think it is still ok. -
ID 8588
XD Resting up when at the Relay for Life 2018 event! -
Finding the right shade is a pain in the ass.Yeah I know... I was thinking about getting a black one to satisfy the CRL then getting a feldgrau just for cons or non 501st wear. My tailor and I are just having issues finding the right shade of feldgrau in water shedding polyester...so if someone knows of some please post.
Sent from my Pixel 2 XL using Tapatalk
-
-
-
-
What It said on the CRL, it is an under as "Optional Accessories".
But Line Officer with Poncho, It have been told as they may be do not have in the movie setting and people fight over it (and derailing the issues with other issues).
If you want to do the Line officer with something, go for the Trench coat instant.
But if you do want to do with Black poncho with a Line officer outfit for 501st main events, just take note that it will look really weird the color is really mismatch of color.
-
-
My pants that I did sometime ago.
Sent from my Pixel 2 XL using Tapatalk- Hask and OfficerPouty
-
2
-
-
15 minutes ago, GDMorti said:
Aye, if we can get more info on that cloak in future, it could be a neat little optional extra for all officers or colourways spotted wearing it.
well... Kris did and pointed it. and this is what it is.
LOL
-
Frist Order: Admiral
Tunic, First Order, Black
For 501st approval:- Fabric is a medium weight, Black material exactly matching the pants.
- Tunic is fitted.
- Double-breasted with a left over right closure.
- The closure may use hidden side (or buck) clasps, or hook and eye closures.
- Sleeves are long, and without decoration, folded cuffs or buttons.
- First Order rank insignia are fully attached on the left arm only
- The collar is snug with an angled V neck design.
- Two vertical seams on the front and back sits between the collar and the edge of the shoulder.
For level two certification (if applicable): - There is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt.
-
There is a seam the entire circumference of the sleeves, that is hidden on the left side by the rank insignia.
Rank Insignia, First Order
For 501st approval:- Worn on the left side of arm, above the wrist and below the elbow
- For Admiral
For level two certification (if applicable): -
The edges are embroidered.
Jodphur Trousers, Black
For 501st approval: - Fabric is a medium weight Black suiting material exactly matching the tunic.
-
Flared riding breeches have semi-stiff flares in the hip/thigh area, below the tunic and above the knee.
- Flare is triangular in shape and fits snugly at the knee.
- Pockets and waist belts are acceptable, although are not visible with the tunic on.
Gloves, First OrderOfficer Boots, First Order
For 501st approval:- Knee-high, black, lace-less, smooth non-textured, leather or leather-like material, with moderate to high-gloss shine.
- There are no stretch panels, buckles, snap tabs, or decoration.
- Boot seams closely match screen-used boots.
- Soles are flat.
- If zippers are present, they are on the inner part of the boot shaft only.
For level two certification (if applicable): - Boots have a zipper on the inner shaft.
- Seams and design match screen-used boots.
For 501st approval: - Gloves are constructed of a non-textured, black leather or leather-like material.
- Gloves are have enclosed fingers, are fitted, and worn underneath the sleeves, showing no bare wrist.
- No visible buckles, straps, or ornamentation.
-
Gloves may have three seams on the back of the hand but are not required.
Belt, First Order
For 501st approval:- The belt is constructed from a black, non-textured leather or a leather-like material.
- Approximately 2" up to 3" in width, is acceptable.
- Belt fits snugly over the natural waist of the wearer.
- There are no loops on the belt.
- Sizing holes on either side of the buckle are acceptable for basic approval.
- The buckle is constructed from a horizontally brushed metal, or metal-looking material.
- Buckle is free of decoration, greeblies or insignia.
- Buckle is rectangular, with sharp-angled edges, approximately 5" long & 2" high.
For level two certification (if applicable): - Belt is made of leather.
- There are no sizing holes
-
Buckle has a slight horizontal curve.
First Order Hat, Black
For 501st approval:- The hat's brim is a black leather, or leather-like material protruding from the front bottom of the dome. It is curved in shape and does not obscure the wearer's eyes.
- The dome fits snugly on the head and cocks slightly back like a baseball cap.
- It is fitted to the head and does not cover the ears.
-
There is a tall flap around the back half of the hat, snugly fitting around the dome.
- This piece is not higher than the dome of the hat, and does not overly flex outward.
- It is effectively vertical in respect to the rest of the hat, and viewed from the side, it's edges are tilted slightly back at an angle.
- The First Order emblem is centered in the front of the hat's dome. It is black and white.
- The base hat is made from the same material as the suit.
For level two certification (if applicable): - The dome has a subtlety curved seam separating the front panel from rest of the hat, with a similar seam on the back part of the dome, with one vertical seam down the dome's back.
Optional Accessories Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.
Cape
For 501st approval:
-
The question it is going to be:
On one of the WIP pictures in here, I have done a pants that is like the TLJ's (I did it as a back up as I did guess early on that the design of the pants will be closer to colonel/major.)
As what we know so far there is Admiral and General rank were seen on that design outfit and color.
The cape can be an Optional Accessories - TFA.
How will it be title? As there is a title under as ID - Imperial Officer: First Order General on what we all know.
-
2 minutes ago, GDMorti said:
If we can get a definitive, visual couple of references for the Admiral pants, I'd be totally fine and happy with following the lead of the Major with regards to how the black Admiral tunic goes together. The shot of the actor in the tunic with its red double-bands is super useful, even if the fit of the thing looks godawful!
It's the cape that gives me concerns. Without enough solid refs I'm just really uncomfortable including it at all. Should we get more in the future, then -absolutely- add it into a CRL if one exists by then.
I'm more keen on getting "An Admiral" CRL out there and making the base uniform correct and available to everyone, than worrying too much about the cloak, which can always be added later on if more information and visual references arise. If we can nail down those pants!
No one is really worry about the clock. In most of the post that people are writing here, are not really talking about the cape but the pants.
So do not worry so much for no reason.
-
4 minutes ago, Steven said:
I'm well aware of this pic Joey, but it's from TFA, I'm talking about the elevator-scene pic from TLJ:
Sadly no red.
4 minutes ago, Steven said:I'm well aware of this pic Joey, but it's from TFA, I'm talking about the elevator-scene pic from TLJ:
Sadly no red.
That one is the General rank which is the same as Hux's ranking. But just that Hux have a coat and a different outfit and he wanted to be a special general (as what it is written in the book) but old man did not want to give him that role. -
Just now, Steven said:
I don't see any red stripes on the armband of the TLJ Officer, so I don't think he is an Admiral, even if the uniform is similar.
But I also hope for more details on the BluRay.
-
6 hours ago, Hux said:
Roger.
Aye on the cape/back ref I agree. Perhaps in this case just waiting a blu-ray may be smart. I think that the front is clear enough.
I did some digging and found these images. Is this one??
yes this design. Just that in TFA, when we first time saw the admiral with a cape. As for TLJ, as this picture that you just posted shows that they do not wear the cape. But what change between from TFA to TLJ is only the costume department in the filming will know why.
It was just info from two actors who were on TFA did said that they were wearing the classic Jodhpur kind. As TLJ DVD is not out, I did not know that they were inside the movie.
And what I wanted to point out mostly that even if it is not a wrap, at least the design of the pants will be to be a colonel look as both share the same kind of look.
As the rank, that is from TFA was Admiral. The looks from that picture Dawn posted from TLJ, it is a Frist Order General rank.
Costume from TFA
So I did one design to try out sometime ago.
- Steven and Paggeldiwwer
-
2
Has anyone used this hat pattern?
in The Officer's Lounge
Posted
I do use that. But I had to do some editing to it as some people's head is smaller or bigger :/
What size did you use?