Walker

Would be good to have a Rebels section too, as the costumes are being discussed all over the place


Sent from my iPhone using Tapatalk

I think it should be one bar as it's probably easier to make one bar than two so no reason for it not to be

Fair enough i missed that as the txt was so small but i think that would be a Level 3 requirement 

Well the diagram presented by Walker seems to be fairly good to me.
And indeed the tills are of solid color.

There is a difference on the rank bars the tiles are not translucent they are solid colours 

I've had a shot at working out the measurements for the Rank Bar, The Belt & Buckle, and the Holster Stud.

 

I have to disagree, I think the new style rankbars as well as the belt buckle are instrumental to the Rebels Era Pfficers (regardless of rank) and as such should be a level one on all Rebels Era Officer CRLs
 

Modeled this the other day. Just known as an imperial pistol.

WOW! A lot of info to take in. I'll have to sit down & go through all this soon. Great research here! 

Hi guys, great work so far.
 
I read some of the stuff and I agree that the collar insignias should be either embroied or metal pins.
The book cover show it as metalic style.
However the insignias on the OD and Tan tunics does not seem to be metalic at all to me.
 
The standard we will set on this will certainly be valid for all the other uniforms that will follow. 

My finished attempt at the blaster.

I could also give it a go next week, do we have a rough length to shoot for? Would all one piece, or many smaller pieces be preferable?

I could try next week. Got some time off work.

From sources, it's yet to have a name and is just referred to as a "Pistol"!


Sent from my iPhone using Tapatalk

Still no name for it, but i have found it

It's the bottom one, and as mentioned above seems to be standard issue pistol for Imperials.
Now to find someone who can 3D model it for printing
 
UPDATE: Clearer Image

I think that the IOC really needs to catch up with the cartoons. I know that the Clone detachment practically has a version for every character of theirs that appeared in the Clone Wars series, and I'm sure that came along with time, but there's a plethora of fascinating costumes in the Rebels series that are underappreciated in my opinion.
 
Good work!
 
EDIT: The only way this could be more perfect is if we had a reference for the blaster he uses. The action figure you show is using a blaster I don't recognize-- It almost looks like a bulkier K-11, DL-18, or whatever Lando's blaster was, but not quite.

The Grand Admiral Thrawn Model as presented at Celebration Europe 2016
===============================================================================================================
Costume Reference Library
 
Imperial Grand Admiral (Rebels’ Era)

Holding picture of Grand Admiral Thrawn, until someone has created a CRL approved Costume
 
Description: Imperial Grand Admiral (Rebels’ Era)
Prefix: ID
Detachment: Imperial Officer Corps
Context: Star Wars: Rebels
 
The Grand Admiral uniform represents the highest ranking officer in the Imperial Fleet. It portrays the sharp, neat military appearance expected of all Imperial high officers. Grand Admirals are appointed by Emperor Palpatine and answer directly to the Emperor, or his authorized executors, in all matters. Grand Admirals include not only front-line commanders, but also technical specialists and theoreticians, enabling them to serve as a core group of leadership for the entire military.
 
The 501st approval requirements are listed in black.
 
The Imperial Officer Corp Detachment defines additional, optional levels of costuming excellence. In the page below, items listed in blue are optional features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume. Level 3 clearance submissions should match the configuration of an 'on screen' / named officer.
 
For 501st membership only the requirements in black need to be met.
 
Required Costume Components
The following costume components are present and appear as described below.
 
Tunic, White
For 501st approval:
Fabric is a medium weight suiting material exactly matching the pants. Tunic should be well interfaced and include a sewn in lining Fabric is a medium weight suiting material exactly matching the pants. Tunic is double-breasted with a left over right closure on the tapered yoke.  Yoke comes up across the shoulder to the top shoulder seam. The standing collar is   The standing collar has square corners. Hight is between 1.25" (31.8 mm) up to 1.5" (38.1 mm). Collar closes snugly and includes a modesty panel behind closure. Collar edges are closed with two eye hooks. There are code cylinder pockets on both outside panels of the jacket from about half way between the top and bottom on the arm hole.  Sleeves are long, with curved shoulder cap and without additional decoration, cuffs or buttons. Sleeves contain (2) seams. One along the bottom (cuff to armpit) and one distinguishing the shoulder cap.  Tunic is constructed with no top-stitching (stitches visible on the exterior surface of fabric) For level two certification (if applicable):
No Side Seams The back of the tunic has princess seams that run vertically to the shoulder seam, meeting the front yoke seam There is no fitting dart in the centre of the yoke. For level three certification (if applicable):
Tunic is secured on the right side by snaps or buttons. Not hook and loop fastener (Velcro).  
Collar Insignia
For 501st approval:
Rank Insignia to be on each collar One bar followed by one outward facing triangle Grey or Silver in color Edged with a black outline Insignia may be an iron on applique material, embroidered or cloth patch, screen printed, or a pin. Pin requires a slight beveled edge For level two certification (if applicable):
Rank Insignia to be one of the following: appliquéd  Heat Printed  
Golden Epaulets
For 501st approval:
Golden epaulets, firmly attached on the edge of each shoulder Ridged in construction Shoulder boards style Without fringe or any detail For level three certification (if applicable):
Epaulets made of metal  
Grand Admiral Rank Bar
For 501st approval:
See the Imperial Rank Bar page for more information.
Accurate Rebels Era Rank Bar Singular Rank Bar is Height - 2 ¼" (57.15 mm) Length - 4 ¾" (120.65 mm) Rank Bar corners are rounded Radius - ¼" (6.35 mm)  Rank Tile dimensions are Width ½" (12.7 mm) Length - ¾" (19 mm) Height - about 1/8" (3.2 mm) Rank Tiles are opaque Rank Tiles are mounted with ¼" (6.4 mm) spaces between them. Rank bar exactly matches the color pattern used in the references. Top Row - Three blue, followed by three yellow tiles. Bottom Row - Three blue, followed by three red tiles.  
Code Cylinders
For 501st approval:
4 Code Cylinders, with 2 per side. o   Dosimeter-style with short clip, with silver clip and top colored Blue.
For level two certification (if applicable):
Must be Rebels style code cylinder with correct "silver" clip and blue caps.  
Belt
For 501st approval:
The belt is constructed from a non-textured leather or a leather-like material. Approximately 2" (50.8 mm) in width, up to 3" (76.2 mm) is acceptable.
There are no loops on the belt. A single large snap or rivet is visible approximately 1" (25.4 mm) from the buckle. The belt may be worn with the snap to the right or left of the wearer. The buckle is constructed from a horizontally brushed metal, or metal looking material. The buckle size is approximately Height - 2 1/2" (50.8 mm) Width - 4" (101.6 mm) The buckle corners are rounded Radius - 1/4" (6.35 mm) Buckle is adorned with a Rebel’s Era Imperial Code Disk off centered at the top. For level two certification (if applicable):
Belt is made of leather. Snap is worn to the left of the wearer. Buckle has a slight horizontal curve. Code Disc is off-centred at the top
 
Holster
For 501st approval:
Black in color An accurate black holster moulded from leather or leather like material. Where possible the holster should be made from same material as the belt. Holster has one belt loops, made of the same material as the holster. The Holster is attached to the belt by a 1/2” metal stud
For level two certification (if applicable):
Holster is made of leather  
Trousers, White
For 501st approval:
Fabric is a medium weight suiting material exactly matching the tunic. Straight legged in style Not jodhpurs or ridding britches Breeches are worn neatly tucked into boots Pockets are acceptable, although not visible with the tunic on.  
Officer Boots
For 501st approval:
Knee-high, black, lace-less, smooth non-textured, leather or leather-like material. Rubber is not acceptable. PVC or synthetic material is allowed as long as it gives the appearance of leather. There are no stretch panels, buckles, snap tabs, or decoration. Boots have conservative heels. If zippers are present, they are hidden on the inner part of the boot shaft. Not visible from the front, side or back. The top of the boots may be flat or Spanish Style, but not Cowboy or Super Hero (pointed at the front) style. For level two certification (if applicable):
Boots do not have a zipper. For level three certification (if applicable):
Boots are made of leather. Not vinyl or PVC. Exact replicas of English riding (dress) boots or Equestrian boots.  
Optional Accessories
Items below are optional costume accessories. These items are not required for approval, but if present appear as described below.
 
Blaster
For 501st approval:
Accurate Rebels' Era Imperial Officer's Pistol  
Armor
For 501st approval:
Rank Bar is removed from Tunic when Armor is being worn Glove to be worn whenever armor is worn Rebels Era Officers Armour Chest-Plate Armor Chest Armor is White in color seam lines may be emphasised in gray Chest-Plate is similar to Biker Scout's but with a higher neckline & a curved bottom Two Blue Squares No Red squares Chest & Back Armor do not meet under the arms & no visible straps Chest & Back Armor join via Golden epaulets Accurate Rebels' Era Grand Admiral Rank Bar Rank Bar is curved to follow the line of the armor Back-Plate Armor Back Armor is White in Color seam lines may be emphasised in gray One large rectangle in the middle, with a circle inside the top right corner Two small Red rectangles (one each side) spaced under the larger rectangle Helmet Dome & Skirt are White in Color (to match aemor) seam lines may be emphasised in gray 2 thin parallel lines running over the top of the Dome, extending from the front brow-line 1 Imperial styled Crest (Gold & 3" in diameter) on centre front of the dome Rebels Era Imperial Code Discs (Gold) positioned either side of the skirt One thin line extending down the back centre of the skirt 1cm edging (painted Gunship Grey) along the entire edge of the helmet. Goggles (optional) Accurate Goggles For level two certification (if applicable):
Accurate Grand Admiral Armor Chest Plate Chest Armour is white in colour  seam line are emphasised in grey Three buttons on the left side: (top to bottom) Red, White, White Chest & Back Armor do not meet under the arms & no visible straps Chest & Back Armor join via Golden epaultes Accurate Rebels' Era Grand Admiral Rank Bar Back-Plate Armor Back Armor is White in Color seam lines are emphasised in grey One large rectangle in the middle, with a circle inside the top right corner Two small Red rectangles (one each side) spaced under the larger rectangle For level three certification (if applicable):
Chest Plate buttons to be illuminated Back Plate Red rectangles to be illuminated a single Illuminated red dot appears beneath circle on the Back Plate.  
Gloves
For 501st approval:
Gloves only to be worn when armor is being worn Black, leather or leather-like, enclosed fingered, non-textured, fitted No bukles, straps, etc  
 
 
THRAWN Required Costume Components
The following items will only be required for a Thrawn face character versus a Generic Grand Admiral.
 
Hair and Skin Appearance
For 501st approval:
All exposed skin is colored blue with theatrical make-up.
Hair is close-cropped and dark-blue, or black. For level two certification (if applicable):
Hair is dark-blue Hair looks natural, and is styled in a way as to not give the appearance of a wig  
Eye Color
For 501st approval:
Red theatrical contact lenses.
While encouraged to complete the look of this character, the contact lens requirement will be waived for 501st acceptance, if the applicant cannot wear contact lenses for health related reasons.
All persons wishing to utilize contact lenses are encouraged to first see their optometrist for a fitting
For level two certification (if applicable):
The entire eye is red