Mox
-
Posts
74 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Posts posted by Mox
-
-
1. Name: Thor Ove Gejrsvik
2. 501st ID: IC-20501
3.IOC name: Mox
4. Nordic Garrison
Imperial Hat, black
For 501st approval:-
Fabric is a medium weight suiting material matching the pants and tunic if applicable.
- Gabardine style weave is most accurate.
- Base of the hat is conical, with a crown about 4" (101.6 mm) tall.
- Front and rear "flaps" overlap on the sides and are about 4" (101.6 mm) high.
- Front bill extends 3" down, decorated with 6 or 7 concentric stitches.
- Imperial Code Disk is positioned in the center of the front vertical flap.
For level two certification (if applicable): - Code Disk has a notch detail on the outermost disk.
For level three certification (if applicable): - Code disk exactly matches screen-used prop.
Black Imperial Flight Suit
For 501st approval:- One piece black coverall/jumpsuit/flight suit with a front invisible zipper.
- Approximately 1.5" (38.1mm) tall mandarin collar with a chevron shaped, left-over-right velcro closure.
-
A silver or white Imperial Cog emblem, on a black background, is present on both shoulders.
- The cog is 3" or 3.5" in diameter, and 1" from the shoulder seam.
-
On the left forearm there is a compad pocket, approximately 5" (127mm) wide by 5.75" (146.05mm) tall, with no flap and a 2.25" (57.15mm) window in it.
- Size might vary to match specific compad.
- All jumpsuit sleeve cuffs have a chevron shaped, Velcro closure tab over each wrist, and are secured snugly when worn.
- On the left bicep, about 2"(50.8mm) below the cog emblem, there is a code cylinder pocket with no flap, and vertical stitching dividing it into pen sleeves.
- The bottom front corner of the pocket is cut off at a bevel on the side pointing in view direction, with the broader upside forming the border of the pen sleeves.
-
The right sleeve has a cargo pocket, about 6" (152mm) wide and 5.75" (146mm) on the bicep, and approximately 2"(50.8mm) below the cog emblem.
- The pocket has a 2"(50.8mm) flap.
- (2) large chest pockets and (2) large front pockets below the belt, without any zipper or flaps.
-
(2) leg pockets with flaps, similar in proportion as the right arm sleeve pocket.
- Size may differ - (Usually the width of the front pockets equals the width of the leg pockets).
- There are no rank bars of any kind on the uniform.
- There are no leg pockets below the knees.
For level two certification (if applicable): For level three certification (if applicable): - Imperial patches on the shoulders are printed vinyl rather than embroidered.
- The suit has a pointed(Mandarin)collar in the back.
Belt
For 501st approval:- The belt is constructed from a non-textured leather or a leather-like material.
- Approximately 2" (50.8 mm) in width, up to 3" (76.2 mm) is acceptable.
- There are no loops on the belt.
-
A single large snap or rivet is visible approximately 1" (25.4 mm) from the buckle.
- The belt may be worn with the snap to the right or left of the wearer.
- The buckle is constructed from a horizontally brushed metal, or metal looking material.
- The buckle size is approximately 2 5/8" (66.7 mm) high and 4 1/8" (104.5 mm) wide with 0.5" (12.7 mm) radius rounded corners.
- Buckle is adorned with an Imperial Code Disk at the center.
-
- Please refer to the Imperial Buckle reference page for information on accurate and inaccurate style buckles.
For level two certification (if applicable): - Belt is made of leather.
- Snap is worn to the left of the wearer.
- Buckle has a slight horizontal curve.
Boots
For 501st approval:- Calf high black leather or leather like material.
- Free of laces, decorative stitching, buckles on the instep or any other embellishments.
-
Boots may have a single adjustment strap at the top outside of the boot, with the buckle no wider than 1".
- This need not be functional.
- Jackboot buckles should not be shiny/can be painted dingy grey or gun-metal color.
- Hobnails may be present on the front of the jackboots.
-
Zippers on the inside of the boot are acceptable, so long as they are concealed.
- If the zipper is not covered by vinyl/ leather, it is painted black.
- German "jack boot" style boots are most canon.
For level two certification (if applicable): - Boots are made of leather.
For level three certification (if applicable): - Original German jack boots (or “Knobelbechers”) or an authentic replication thereof.
- Boots have the top adjustment strap.
Optional Accessories
Code Cylinders
For 501st approval:-
Two may be worn.
- Rod Style: Machined aluminum rod with flaring disc detail at top.
For level two certification (if applicable): - ESB bridge crew shall have 2 code cylinders.
- ANH and ROTJ bridge crew shall not have code cylinders.
Imperial Communications Pad
For 501st approval:- Rectangular communications pad with buttons and detailing as shown.
- Compads are not electronically lit.
For level two certification (if applicable): - ROTJ bridge crew shall have a compad.
- ANH and ESB bridge crew shall not have a compad.
Black Gauntlet Gloves
For 501st approval:- Black, leather or leather-like, enclosed fingered, non-textured, fitted gauntlet style.
- No buckles, straps, or decorative stitching are permitted.
For level two certification (if applicable): - Gloves are made of leather.
- ROTJ bridge crew shall wear gauntlet style gloves.
- ANH and ESB bridge crew shall not wear gloves.
Belt Boxes
For 501st approval:- Dimensions are approximately 2 1/2" (63.5 mm) by 4 1/2" (114.3 mm) by 1" (25.4 mm) thick.
- Project boxes are not allowed for level 2 and 3 clearance.
For level two certification (if applicable): - Belt boxes are made of metal.
Action Foto:
-
Fabric is a medium weight suiting material matching the pants and tunic if applicable.
-
Congratulation. The Force is strong with this couple. mtfbwya...
-
This is just amazing. This shows that people in that universe are using glasses too, and its canon sins its in the movie.
We had a little discussion about this. If people with glasses shud go with lenses when using a regular character that not spesifid. This shows that it exist and people are using glasses in this universe too. Fantastic observation...
-
Congratulation to all of the family, Trooper. Good to hear she is doing real great...
-
-
I am looking for those kinda jackboots in my size for upgrading my costume to lvl3.
Calf high black leather or leather like material.
Free of laces, decorative stitching, buckles on the instep or any other embellishments.
Boots may have a single adjustment strap at the top outside of the boot, with the buckle no wider than 1".
This need not be functional.
Zippers on the inside of the boot are acceptable, so long as they are concealed.
If the zipper is not covered by vinyl/ leather, it is painted black.
German "jack boot" style boots are most canon.
For level two certification (if applicable):
Boots are made of leather.
For level three certification (if applicable):
Original German jack boots (or “Knobelbechersâ€) or an authentic replication thereof.
Boots have the top adjustment strap.
IC-20501 Requesting Bridge Crew (ESB) Imperator Status
in Withdrawn Imperator Requests
Posted
Thanks, Mark and Perth. I will put that in mind when i put my Bridge Crew next time.