[Painting toy DL44S, need advice on paint]

Thank you for the help. Any particular brand or type you use?

We have don't have the same brands over here in Aus

[Painting toy DL44S, need advice on paint]

I use spray paints available from the hardware store, they are more industrial, btw don't mix brands as some react with each other. I first use a primer, then cover with a silver, mask the muzzle, then paint satin black, then mask the whole gun except the handle, spray that brown, then give the whole gun two coats of satin clear. Now each of these steps I let dry for a day in between so it can take a while.

["The Ryner" takes the prize!]

Awesome work troops, well done

[Help! Cosplaysky made the jodphurflares too big!]

Looking much better, if you give them a couple of coats of spray starch it will help them stay puffed out

[How can I get an Imperial Uniform with Helmet and armor like Officer ID185]

This is a nice build here

[Help! Cosplaysky made the jodphurflares too big!]

I've done mine and a friends, I turned inside out, pinned about 2 inches in at the widest part then tapering off, sew both sides, cut off the excess, then turned the right way out and ironed the side seem again. Starch is a great help too in keeping them out. Cosplaysky seem to always get the jackets really nice but lack in the pants department. Good luck with the fix

[Brown Holster]

Very nice

[Fun in Side Saddle]

That is awesome, I haven't seen a mounted trooper before, will be showing our guys here. Thanks for letting me know and for sending the photo's. Cheers. Glen

[Code cylinder alternative?]

Bit pricy I make completed pairs for $35

[ID80008 Requesting ANH Imperial Security Bureau (Colonel) Executor Status]

From my modesty panel thread here Posted by the DL (BJ) "basically a small strip, the same width of the collar, sewn behind the right side of the collar closure, & connects to the left side, behind the collar closure by two eye/hook connectors

[ID80008 Requesting ANH Imperial Security Bureau (Colonel) Executor Status]

They are hidden in the photo below, you can see the clips are behind the flaps There was a discussion in this thread I had posted.

[ID80008 Requesting ANH Imperial Security Bureau (Colonel) Executor Status]

But in the first photo's it shows the clips, they shouldn't be seen

[ID80008 Requesting ANH Imperial Security Bureau (Colonel) Executor Status]

You may get knocked back as that first one doesn't show a modesty panel, didn't you have another photo with it.

[ID80008 Requesting ANH Imperial Security Bureau (Colonel) Executor Status]

Good luck on approval Big J

[Beserkon convention Duluth MN]

Very nice work Jeremy, well done

[UK Garrison Cleared Staff Officer reporting for Duty]

Nice work congrats

[Blaster for black imperial officer]

Looking good, nice work

[Blaster for black imperial officer]

I used this one here and I modified the top section for the Merr Sonn, also I used a brown material at first then found better pictures showing a burgundy colour so I changed to that one. My first holster photo below, will post the new colour one when I get back to the computer.

[Trooping pics anyone?]

Taking care of some runawy Jawa's and their younglings

[Blaster for black imperial officer]

Looking good

[Brown Holster]

Looks top shelf to me, well done

[My Uniform ideas to meet 501 standards?]

Sounds like you are well on your way, just give Cosplaysky as many measurements as you can, their pants have been a small problem for some, too baggy and flares too low, I had to mod mine to bring the pants into a better fit which allowed me to also bring the flares up higher. If you are handy you can make your own code cylinders, holster, gun, if not there are many who make them.

[Blaster for black imperial officer]

Looking good so far, keep up the excellent work

[Custom T shirts...]

I rolled my own ball and made my own lol

[My first troop as an officer]

Congrats on your first officer troop, well done