Jump to content

Hask

IOC Member[IOC]
 View Profile  See their activity

  • Posts

    6,787

  • Joined

  • Last visited

  • Days Won

    242

 Content Type 

Posts posted by Hask

    Staff Officer (black uniform) Update

    in CRL Updates

    Posted

    This is where it is so far, photos of some parts part will be changing once I get them.

     

     

    crlblackhd.gif
     
    Imperial Staff Officer (Non Saga)
    Staff Officer.jpg
    Model ID 98765, Photo by Tania Tindal Conde
     
    Visit the Gallery for this Costume for more models and parts views.
     

     

    Imperial-Officer-Corps.png

    Description: Imperial Staff Officer
    Prefix: ID
    Detachment: Imperial Officer Corps
    Context: Rogue one, Solo, The Mandalorian and Expanded Universe..

    These black uniformed officers are high class soldiers within the Empire's Imperial Army and provided a commanding presence among the legions of Stormtroopers where their leadership roles often inspire troops in battle. These ambitious officers not only serve aboard starships and military installations but are also pilots for transports.

     

     

    For 501st membership only the requirements in black need to be met.

    The Imperial Officer Corp Detachment defines additional, optional levels of costuming excellence. In the page below, items listed in blue are optional features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume. Please visit the Detachment website for more specific details.


     
    Required Costume Components

    The following costume components are present and appear as described below.

     

     

     

    Krennic-hat1.jpg Imperial Hat, Versions Two and Three
    • Fabric is a medium weight suiting material matching the pants and tunic if applicable.
      • Gabardine style weave is most accurate.
    • Hat is coned shaped with a flat crown
    • Base of the hat is conical, with a crown about 4" (101.6 mm) tall.
    • Front and rear "flaps" overlap on the sides and are about 4" (101.6 mm) high.
    • Front bill extends 3" down, decorated with 5, 6 or 7 concentric stitches.
    • Code disk is positioned in the center of the front flap, the code disk has no notch.

     

     

     

    ID tunic black.jpg Tunic, Black
    • Fabric should be a medium weight suiting material exactly matching the pants and hat.
    • Tunic is double-breasted with a left over right closure on the tapered yoke.
    • Yoke comes up across the shoulder to the top shoulder seam.
    • The standing collar has square corners and is about 1.25" (31.8 mm) tall, closes snugly and includes a modesty panel behind closure.
      • Collar edges are closed with two eye hooks.
    • There are code cylinder pockets on both outside panels of the jacket from about half way between the top and bottom on the arm hole.
    • Sleeves are long, and without decoration, cuffs or buttons, containing 2 seams, one along the bottom and one along the back.
    • Tunic is constructed with no top-stitching (stitches visible on the exterior surface of fabric)
    • Fasteners on the uniform should not be visible.

     

    OPTIONAL Level two certification (if applicable):
    • There is a dart of about 2" (50.8 mm) in the top center of the yoke.
    • There is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt.
    • The back of the tunic has princess seams that run vertically and turns outward to intersect the arm-hole seam at the vertical center.
    OPTIONAL Level three certification (if applicable):
    • Tunic must be secured on the right side by snaps or buttons, not Velcro.
    • There is a lining sewn in.

     

     

    NEW

    NSrank.jpg Rank Bar
    • Rank consists of colored plastic tiles mounted on single or double metal or metal looking bars.
    • Worn on the left side of the tunic over the heart.
    • Bar is approximately 1"(25.4 mm)to 1.25" (31.75 mm)in height.
    • Rank tile dimensions are approximately 1/2" (12.7 mm) width x 3/4" (19 mm) height x 1/8" (3.2 mm) deep. - This is the OT size, the correct larger tiles are also acceptable.
    • Please note that final dimensions of the bar is proportional to the wearer.
    • Rank tiles are translucent, rectangular, positioned side by side in a vertical orientation, and evenly spaced.
    • Rank bar corners are hard angle or slightly rounded
    • Rank tiles are translucent.

     

    OPTIONAL Level two certification (if applicable):
    • Rank consists of colored plastic push buttons mounted on a metal bar.
    OPTIONAL Level three certification (if applicable):
    • Push button tiles are larger for Rogue One/Solo (approximately 15 mm wide, 21 mm tall, and 3.2 mm deep) Smaller OT size for The Mandalorian.

     

     

    New

    CCR1.jpg Code Cylinders
    • Between 1 to 4 per costume may be worn.
      • Modified: silver "chalk holder" tube with short clip and blue colored top.
    • True Dosimeter with correct clip and blue top.

     

    OPTIONAL Level two certification (if applicable):
    • Only real or replica dosimeters are used.
    • If only one is worn, it is on the left side.

     

     

    New

    Krennikgloves.jpeg Gloves
    • Black, wrist length gloves constructed of a non-textured leather or leather-like material.
    • Gloves have a plain back and no visible adornments

     

    OPTIONAL Level two certification (if applicable):
    • Gloves made of leather
    • Gloves end just past the wrist

     

     

     

     

    ID belt.jpg Belt
    • The belt is constructed from a non-textured leather or a leather-like material.
    • Approximately 2" (50.8 mm) in width, up to 3" (76.2 mm) is acceptable.
    • There are no loops on the belt.
    • A single large snap or rivet is visible approximately 1" (25.4 mm) from the buckle.
      • The belt may be worn with the snap to the right or left of the wearer.
    • The buckle is constructed from a horizontally brushed metal, or metal looking material.
    • The buckle size is approximately 2 5/8" (66.7 mm) high and 4 1/8" (104.5 mm) wide with 0.5" (12.7 mm) radius rounded corners.
    • Buckle is adorned with an Imperial Code Disk at the center.
      • Please refer to the Imperial Buckle reference page for information on accurate and inaccurate style buckles.

     

    OPTIONAL Level two certification (if applicable):
    • Belt is made of leather.
    • Snap is worn to the left of the wearer.
    • Buckle has a slight horizontal curve.

     

     

     

    ID officer jodphurs black.jpg Jodhpur Trousers, black
    • Fabric is a medium weight suiting material exactly matching the tunic and hat.
      • Gabardine style weave is most accurate.
    • Flared riding breeches are canon.
    • Breeches must be worn with boots.
    • Pockets are acceptable, although they are not visible with the tunic on.

     

    ID Officer Boots.jpg Officer Boots
    • Knee-high, black, riding style, lace-less, smooth non-textured, leather or leather-like material.
    • There are no buckles, snap tabs or decoration.
    • Boots have conservative heels.
    • A single stretch panel or zipper may be present, they are to be hidden on the inner part of the boot shaft.
      • Not visible from the front, side or back.
    • The top of the boots may be flat or Spanish Style, but not Cowboy or Super Hero (pointed at the front) style.

     

    OPTIONAL Level two certification (if applicable):
    • Boots do not have stretch panels or a zipper.
    OPTIONAL Level three certification (if applicable):
    • Boots are made of leather.
      • Not vinyl or PVC.
    • Exact replicas of English riding (dress) boots or Equestrian boots.

     

     
    Optional Accessories

    Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.

     

    IOC Staff Officer RainPoncho.jpg Rain Poncho
    • Made of a black, water sheeting polyester or nylon material.
    • The closure is located at the costumers right side. The collar overlaps and the opening is approximately 2.5 inches on the shoulder, going down vertically to the bottom of the yoke.
    • The yoke is flush against the costumer and has a seam down the front center, this ends in a point.
    • The edge of the poncho has approximately 1 inch seam around all edges.
    • The collar is approximately 3 inches tall at the front and is top stitched with lines approximately every 1/4 inch.
    • The back of the poncho is flat across the back.
    • The poncho voids at the edge of the costumers shoulders.
    • The front of the poncho has a piece attached to the yoke but separate from the sides
      • The front extends down to just past the crotch area and is tucked in to the costumer's belt.
      • There is a code cylinder pocket in which two code cylinders are worn.

     

     

    Ioc blacktrench rogueone.jpg Trenchcoat
    • Made of a medium-weight waterproof fabric that is black; fabric has a matte finish.
    • Two flares at the breast overlap and close in the front, left breast over right. The collar continues around the neck and is approximately 3.5 inches wide.
    • The inner facing of the upper collar may be of darker fabric but is not required.
    • A seam runs down the arm on the outside, it begins at the costumers collar.
    • Two inch long cuffed sleeves with a single button towards the end of the cuff. The cuff "strap" ends in a chevron shape.
    • On the back the storm shield has a pinch pleat at the top center of the shoulders.
    • The coat ends mid-calf and is straight cut along the bottom edge.
    • The coat below the belt has a split seam in the back.
    • Two pocket flaps may appear at the costumer's hip, but are not required; if present, there should be no visible pocket stitching.
    • The coat is worn belted with the standard leather officer's belt or loose.

     

    New

    Officerbelt boxes.jpeg Belt Boxes
    • Dimensions are approximately 2" (50,8mm) wide by 3" (76.2 mm) tall by 1" x (25,4mm) thick
    • Two boxes may be worn, one on either side of the belt.
    • Placement of the screw / rivet for the belt boxes should be on the shortest side (top and bottom for vertical belt boxes, left and right for horizontal)

     

    OPTIONAL Level two certification (if applicable):
    • Belt boxes should include a lid on back of the box.
    • Belt boxes are made of metal.
    • Belt boxes shall be worn only vertically.
    OPTIONAL Level three certification (if applicable):
    • Belt boxes are made of metal.
    • Belt box, code cylinder, and rank badge combination is consistent with canon officers.

     

     

    NEW

     

    Holster21.jpg Holster, Version four
    • Made of black leather or leather-like material.

     

    OPTIONAL Level two certification (if applicable):
    • Holster is affixed via a single loop over the belt.
    • Holster is made of leather.
    OPTIONAL Level three certification (if applicable):
    • Holster matches reference image.

     

     

    New

     

    Blaster21.jpg SE-14R Light Repeating Blaster
    • The barrel detailing is evident with the cocking lever and slider in place.
    • The ejection port is also evident.
    • The scope mount looks similar to the magazine but smaller in size.
    • The scope does not protrude past the blaster body.

     

    Staff Officer (black uniform) Update

    in CRL Updates

    Posted

    I

    Imperial Staff Officer (Non Saga)

    Description: Imperial Staff Officer
    Prefix: ID
    Detachment: Imperial Officer Corps
    Context: Rogue one, Solo, The Mandalorian and Expanded Universe.

    These black uniformed officers are high class soldiers within the Empire's Imperial Army and provided a commanding presence among the legions of Stormtroopers where their leadership roles often inspire troops in battle. These ambitious officers not only serve aboard starships and military installations but are also pilots for transports,

     

    Imperial Hat, black

      • Fabric is a medium weight suiting material matching the pants and tunic if applicable.
      • Hat is coned shaped with a flat crown.
        • Gabardine style weave is most accurate.
      • Base of the hat is conical, with a crown about 4" (101.6 mm) tall.
      • Front and rear "flaps" overlap on the sides and are about 4" (101.6 mm) high.
      • Front bill extends 3" down, decorated with 5, 6 or 7 concentric stitches.
      • Imperial Code Disk is positioned in the center of the front vertical flap.
      • Code Disk has no notch detail on the outermost disk.

       

      OPTIONAL Level two certification (if applicable):
      • Code Disk exactly matches anthology films.
       

       

       

       

      ID tunic black.jpg Tunic, Black
      • Fabric should be a medium weight suiting material exactly matching the pants and hat.
      • Tunic is double-breasted with a left over right closure on the tapered yoke.
      • Yoke comes up across the shoulder to the top shoulder seam.
      • The standing collar has square corners and is about 1.25" (31.8 mm) tall, closes snugly and includes a modesty panel behind closure.
        • Collar edges are closed with two eye hooks.
      • There are code cylinder pockets on both outside panels of the jacket from about half way between the top and bottom on the arm hole.
      • Sleeves are long, and without decoration, cuffs or buttons, containing 2 seams, one along the bottom and one along the back.
      • Tunic is constructed with no top-stitching (stitches visible on the exterior surface of fabric)
      • Fasteners on the uniform should not be visible.

       

      OPTIONAL Level two certification (if applicable):
      • There is a dart in the top center of the yoke. Dart should extend slightly past code cylinder pockets.
      • There is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt.
      • The back of the tunic has princess seams that run vertically and turns outward to intersect the arm-hole seam at the vertical center.

       

      OPTIONAL Level three certification (if applicable):
      • Tunic must be secured on the right side by snaps or buttons, not Velcro.

       

       

       

      Staff Officer Rankbar.jpg
        • Rank Bar
        •  
          • Worn on the left side of the tunic over the heart.
          • Rank consists of colored plastic tiles mounted on a single or double metal or metal looking bar.
          • The bar is approximately 1" (25.4 mm) height.
          • Rank tile dimensions are approximately 1/2" (12.7 mm) width x 3/4" (19 mm) height x 1/8" (3.2 mm) deep. - This is the OT size., the correct larger tiles are also acceptable.
          • Tiles are mounted with approximately 3.5 mm spaces between them.
          • Rank tiles are translucent, rectangular,  positioned side by side in a vertical orientation, and evenly spaced.
          • Rank tile configuration may be from any licensed source however ranks specific to A New Hope only are not applicable.

           

          OPTIONAL Level two certification (if applicable):
          • Rank consists of colored plastic push buttons mounted on a metal bar.
          • Rank tiles are the larger Rogue One/Solo style (approximately 15 mm wide, 21 mm tall, and 3.2 mm deep).

           

          OPTIONAL Level three certification (if applicable):

          • Rank is chosen from Rogue One or Solo or The mandolorian.
       

       

      Code Cylinders.jpg Code Cylinders
      • Between 0 to 2 per costume may be worn..
        • Rod style: machined aluminum rod with flaring disc detail at top
        • Dosimeter style: True Dosimeter with correct clip and blue top.
        • Alternate Style: Silver clip with no blue top.
        • If only one is worn, it is on the left side.

       

      OPTIONAL Level two certification (if applicable):
      • Only real or replica dosimeters with silver toned clips or aluminum rod style are used.

       

      OPTIONAL Level three certification (if applicable):

      • Code cylinder combination must match chosen rank.

       

       

       

       

       

      ID belt.jpg Belt
      • The belt is constructed from a non-textured leather or a leather-like material.
      • Approximately 2" (50.8 mm) in width, up to 3" (76.2 mm) is acceptable.
      • There are no loops on the belt.
      • A single large snap or rivet is visible approximately 1" (25.4 mm) from the buckle.
        • The belt may be worn with the snap to the right or left of the wearer.
      • The buckle is constructed from a horizontally brushed metal, or metal looking material.
      • The buckle size is approximately 2 5/8" (66.7 mm) high and 4 1/8" (104.5 mm) wide with 0.5" (12.7 mm) radius rounded corners.
      • Buckle is adorned with an Imperial Code Disk at the center.
        • Please refer to the Imperial Buckle reference page for information on accurate and inaccurate style buckles.

       

      OPTIONAL Level two certification (if applicable):
      • Belt is made of leather.
      • Snap is worn to the left of the wearer.
      • Code disk matches anthology films.
      • Buckle has a slight horizontal curve.

       

      OPTIONAL Level three certification (if applicable):

      • Belt has grooves 1/4" form the top and bottom edges.

       

       

       

      ID officer jodphurs black.jpg Jodhpur Trousers, black
      • Fabric is a medium weight suiting material exactly matching the tunic and hat.
        • Gabardine style weave is most accurate.
      • Flared riding breeches are canon.
      • Breeches must be worn with boots.
      • Pockets are acceptable, although they are not visible with the tunic on.

       

      ID Officer Boots.jpg Officer Boots
      • Knee-high, black, riding style, lace-less, smooth non-textured, leather or leather-like material.
      • There are no buckles, snap tabs or decoration.
      • Boots have conservative heels.
      • A single stretch panel or zipper may be present, they are to be hidden on the inner part of the boot shaft.
        • Not visible from the front, side or back.
      • The top of the boots may be flat or Spanish Style, but not Cowboy or Super Hero (pointed at the front) style.

       

      OPTIONAL Level two certification (if applicable):
      • Boots do not have stretch panels or a zipper.

       

      OPTIONAL Level three certification (if applicable):
      • Boots are made of leather.
      • Exact replicas of English riding (dress) boots/ Equestrian boots or German marching boots.
      • Boots may have top adjustment strap on the outside of the boots.
      • Strap is set slightly to the rear.

       

       
      Optional Accessories

      Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.

       

      IOC Staff Officer RainPoncho.jpg Rain Poncho
      • Made of a black, water sheeting polyester or nylon material.
      • The closure is located at the costumers right side. The collar overlaps and the opening is approximately 2.5 inches on the shoulder, going down vertically to the bottom of the yoke.
      • The yoke is flush against the costumer and has a seam down the front center, this ends in a point.
      • The edge of the poncho has approximately 1 inch seam around all edges.
      • The collar is approximately 3 inches tall at the front and is top stitched with lines approximately every 1/4 inch.
      • The back of the poncho is flat across the back.
      • The poncho voids at the edge of the costumers shoulders.
      • The front of the poncho has a piece attached to the yoke but separate from the sides
        • The front extends down to just past the crotch area and is tucked in to the costumer's belt.
        • There is a code cylinder pocket in which two code cylinders are worn.

       

       

      Ioc blacktrench rogueone.jpg Trenchcoat
      • Made of a medium-weight waterproof fabric that is black; fabric has a matte finish.
      • Two flares at the breast overlap and close in the front, left breast over right. The collar continues around the neck and is approximately 3.5 inches wide.
      • The inner facing of the upper collar may be of darker fabric but is not required.
      • A seam runs down the arm on the outside, it begins at the costumers collar.
      • Two inch long cuffed sleeves with a single button towards the end of the cuff. The cuff "strap" ends in a chevron shape.
      • On the back the storm shield has a pinch pleat at the top center of the shoulders.
      • The coat ends mid-calf and is straight cut along the bottom edge.
      • The coat below the belt has a split seam in the back.
      • Two pocket flaps may appear at the costumer's hip, but are not required; if present, there should be no visible pocket stitching.
      • The coat is worn belted with the standard leather officer's belt or loose.

       

       

      Officerbelt boxes.jpeg Belt Boxes
      • Dimensions are approximately  2" (50,8mm) wide by 3" (76.2 mm) tall by 1" x  (25,4mm) thick
      • Two boxes to be worn vertically, one each on either side of the belt buckle.

       

      OPTIONAL Level two certification (if applicable):
      • Belt boxes should include a lid on back of the box.
      • Belt boxes are made of metal.

       

      OPTIONAL Level three certification (if applicable):
      • Belt box, code cylinder, and rank badge configuration is consistent with one another.

       

       

      Gloves

      • Black, wrist length gloves constructed of a non-textured leather or leather-like material.
      • Enclosed fingers.
      • No buckles, straps, etc.
      • May have three stitched lines on the back of the hand.

       

      SE-14R Light Repeating Blaster

      • The barrel detailing is evident with the cocking lever and slider in place.
      • The ejection port is also evident.
      • The scope mount looks similar to the magazine but smaller in size.
      • The scope does not protrude past the blaster body.

       

      Holster.
      • Made of black leather or leather-like material.

       

      OPTIONAL Level two certification (if applicable):
      • Holster is affixed via a single loop over the belt.
      • Holster is made of leather.
      OPTIONAL Level three certification (if applicable):
      • Holster matches reference image.

      Staff Officer (black uniform) Update

      in CRL Updates

      Posted

      How about?

       

      • Worn on the left side of the tunic over the heart.
      • Rank consists of colored plastic tiles mounted on a single metal or metal looking bar.
      • The bar is approximately 1" (25.4 mm) height.
      • Rank tile dimensions are approximately 1/2" (12.7 mm)width x 3/4" (19 mm) height x 1/8" (3.2 mm) deep. - This is the OT size.
      • Tiles are mounted with approximately 3.5 mm spaces between them.
      • Rank tiles are translucent, rectangular,  positioned side by side in a vertical orientation, and evenly spaced.
      • Rank tile configuration may be from any licensed source however ranks specific to A New Hope only are not applicable.

       

      OPTIONAL Level two certification (if applicable):
      • Rank consists of colored plastic push buttons mounted on a metal bar.
      • Rank tiles are the larger Rogue One/Solo style (approximately 15 mm wide, 21 mm tall, and 3.2 mm deep).
      • Rank bar is a single row.

       

      OPTIONAL Level three certification (if applicable):

      • Rank is chosen from Rogue One or Solo.
    ×
    ×
    • Create New...