-
Posts
1,123 -
Joined
-
Last visited
-
Days Won
11
Content Type
Profiles
Forums
Gallery
Posts posted by Dimentex
-
-
Forgive me is I misunderstand, but it feels like you're saying two different things. We shouldn't be talking about Level 1 because everyone should aim for L2/L3, but we need to target was will be Level 1 in the future? If we don't feel that L1 is "good enough" and people should target higher, why do we have L1 in the first place?
And, let's be honest. for every person that sees an imperator or executor and wants that high of detail, there's people who just want to look like the character and have fun with kids who wouldn't know a L1 from a L2. Everyone does this for different reasons - and when we start talking about making it harder to get approval, all I can hear is those people claiming we're "elitists" - and I BLOODY hate that. -
2 hours ago, KDKdesign said:
The line on the back side of the yoke - it is a single line of topstitching (not a seam) that goes from the collar straight to the stitching on the side panel's back seam - it probably even is a continuous line of stitching from yoke onto the cape seam.
Oh damn, nice catch, I didn't even see that.
-
-
7 minutes ago, Exaldear said:
Just got my new tunic from CA. Pockets were raised as per request. Collar was not, but is stiffened.
What's the height on your collar?
And I was afraid of that - Ripping the collar out and making a new one might be harder than we want to believe - I'm following another threat on how to modify the pattern, I may try to make my own.
-
Welcome sir. I can try to scan better ones for the other ones (like the Staff Officer) - Krennic was the only one I've found in the entire book with the special disc, it fit him wearing a special uniform.
-
-
7 minutes ago, Daetrin said:
So, to be clear you are just adding the second section? Sorry, it's not immediately clear what is current text, and what is the proposed changes?
Yes sir. I don't see any changes in the pants, so just allowing either Tunic (with appropriate rank for either one)
-
1 minute ago, nocternus said:
If anyone buys anything before a CRL goes live that unfortunately is the risk they take and i will continue to push for buttons on all those that had them in the movies there is no excuse not to now
Then let's take out the top line and make it clear. Pretty simple. Tigg can let her customers know that Krennic can't be approved with her badges.
-
Just now, nocternus said:
Push buttons are plastic tiles James i think you are just nick picking now I also dont recall the LMO taking part in the discussion in the main thread and as stated many times its him that makes the decision based on what is presented to him
Hardly nit picking sir, people are buying Tigg's rank bars, and if this is the case then they're useless. I would say either move the push buttons to Level 2 or remove the first line so there's no confusion - while I don't want to take business away from Tigg, I also don't want to see people spend money and find it wasted.
If that's nit picking then yeah, I'll pick those nits.
-
3 minutes ago, nocternus said:
James clearing at Level 3 is just as valid as level one more so in fact and if anyone that has a GML that is not sure then direct them to ask
Well, i'll say I wish you had been in admin on Clone side - because one of my friends had to redo her holsters on her clone because Level 1 said on a strap, Level 2 said no strap, magnetic attachment, she went that way because it looked better, and was refused entry until she put the bloody strap on.
-
One more small thing that I noticed because of someone else's question.
QuoteRank Bar
For 501st approval:- See the Imperial Rank Bar page for more information.
- Worn on the left side of the tunic over the heart.
- Rank consists of colored plastic push buttons mounted on a metal bar.
So the very first line says to see the Rank Bar Page - which states:
Quote- Accurate Rank Bars consist of colored plastic tiles mounted on metal backing.
- Rank tiles are translucent.
- The color, quantity, and arrangement of the tiles is determined by rank, and is appropriate to the uniform.
Yet the third line contradicts that. and specifies push buttons. I thought the decision in the main thread came to Push buttons would be Level 2, as there were not yet any vendors that made them yet inside IOC and/or 501st forums (yes, I know there's the german one on FB and another one, but they're not here)? I know BJ wanted standardization across the board - are we going to revise all Rank bar requirements so the Plexi isn't allowed anywhere?
-
Just now, fil5117 said:
Yep. See my response above.
-
2 minutes ago, nocternus said:
James it does match the CRl look at Level 3 requirements
I see that, but I know a LOT of GMLs (and yeah, I'll call one of Star's out on this because of an issue on a clone) that don't give 3 flips about Level 2 or Level 3, if it doesn't match Level 1 is isn't cleared.
I know we had this discussion before, but I've heard way too many stories just in the last year of GMLs that use the CRL exacts as a great pass/fail, not paying attention to making it more screen accurate.
-
CRL(s) - Imperial Navy Trooper
Add in the SE-14 Blaster Pistol as an option, as seen on page 122 of the RO:VG (the Ranked Trooper is covered in another thread)
-
CRL: Imperial Security Bureau Officer
Section: Officer Tunic, Cream
Page 147 of the Rogue One Visual Guide states that Inspector General Bozeden Jeems is ISB. He wears the same tunic as Director Krennic - so add that as an option.QuoteOfficer Tunic, Cream (ANH)
For 501st approval:- Fabric should be a medium weight, ecru/cream colored suiting material. Gabardine style weave is most accurate.
- Tunic is double-breasted with a left over right closure on the tapered yoke.
- Yoke comes straight across from the collar center not coming up to the shoulder seam.
- The standing collar has square corners and is about 1.25" (31.8 mm) tall and closes snugly and includes a modesty panel.
- Sleeves are long, and without decoration, cuffs or buttons, containing 2 seams, one along the bottom and one along the back.
- The ISB uniform shall not have the standard code cylinder pockets.
- Princess seams shall be optional for ISB tunics.
For level two certification (if applicable): - There is a dart of about 2" (50.8 mm) in the top center of the yoke.
- There is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt.
- The back of the tunic has princess seams that run vertically and turn outward to intersect the arm-hole seam at the vertical center.
For level three certification (if applicable): - Tunic must be secured on the right side by snaps or buttons, not Velcro. There is no topstitching visible anywhere and it must have a lining sewn in
Alternatively:
Tunic, White
For 501st approval:-
Fabric is a medium weight suiting material.
- Overdyed wool twill Gabardine style weave is most accurate.
- Tunic is double-breasted with a left over right closure on the tapered yoke.
- Yoke comes up across the shoulder to the top shoulder seam.
-
The standing collar has square corners and is about 1.25" (31.8 mm) tall.
- Collar closes snugly and includes a modesty panel behind closure.
- Collar edges are closed with two eye hooks.
- There are code cylinder pockets on both outside panels of the jacket from about half way between the top and bottom on the arm hole.
- Sleeves are long, and without decoration, cuffs or buttons.
-
Sleeves contain 2 seams.
- One along the bottom and one along the back.
- Tunic is constructed with no top-stitching (stitches visible on the exterior surface of fabric)
- Hook and eye fasteners on the uniform should not be visible.
-
30 minutes ago, nocternus said:
All can you list each costume in its own thread or its going to be hard to follow
Actually moving that to another thread since we started talking staff officer already
-
Interesting. I didn't realize anyone had - if it doesn't match the current CRL, how did it clear?
-
-
-
Stepping away from Krennic for a moment, thank you Mark for making this happen.
This'll be a brain dump, I can crack this into separate threads if need be. EDIT: Cracked into 3 threadsCRL: Staff Officer: Black
Rename to Staff Officer: Rogue One. Update Photo with a "correct" rank bar configuration (using the same model if possible, just one of the ranks from RO).
Begin Creation of a Staff Officer: ANH. There is a thread floating around SOMEWHERE here with lots of details - while no one has made a completely screen accurate tunic, I know several people intend to try soon (Kris is one I believe)Also, on 123 of the VG, there is a crewman in a greyish uniform (not the blue of the Mechanical Crew, but not the black of bridge Crew). Might be something to look into. Also would love to see Galen's uniform and the Death Star Engineers made - Galen might have ended up being a "good guy" but to the Empire he was considered one of ours.
- Charlemagne and Mac
- 2
-
2 hours ago, Mkjava said:
I know this has come up before but I want to confirm now that we have a CRL and updates to it are being discussed. Can a rank bar from Tiggie as I have below be approved for level 1:
The push button distinction seems very minor to me at level 1, but if that's the absolute decision then I would like to know as I'll need to find another one. Thanks!
Sent from my iPhone using TapatalkSimple answer, yes. The Rank bars may be changed across the board at some future time, but for now they kept the same wording and referenced the same information as all other CRLs
-
Yeah, that's it - I thought it was labeled as Thrawn, probably why I kept looking past that one.
-
I believe Mark was looking into that rule.
-
Where did the thread for Thrawn go? It won't even pull up in searches now?
Proposed Updates to CRL Staff Officer Black to Staff Officer Rogue One
in CRL Updates
Posted
I have no issue on the dosimeters, we have multiple people making them now. The rank bars I'm going to have to go back and agree with something BJ said - when there's vendors making accurate ones that we can send people to (much like we send a LOT of people to Tigg), I'll stand right next to you on that. If our only argument though is "they're easy to make yourself" - no, sorry, I can't support that, because what's easy to you may not be to others, or they don't have the time, or the space, or the extra money for the tools required (you can't cut and shape aluminum bars with scissors.)