I talked to him yesterday, he says his shop is set up and he is back up and running, currently working on 2-4 coats. Hopefully now that his move is done he goes back to quick turn arounds.
CRL Proposal text. Much of this is from the Line Officer CRL, I will note major differences in color
REVISION 11/1/2018: under advisement from Detachment Staff. Initial CRL will be for a Mimban Lieutenant, further additions may come later as add ons to this
REVISION 11/2/2018: blaster option changed to reflect only the SE-14r and associated holster. Requirement for coat and boots to be muddy/weathered added as optional Level 2/3 requirements.
REVISION 12/18/2018: hat code disk L2/3 changed to NOT having a notch to match the current finding that R1 and Solo officers did not have notches on the hat disk.
Mudtrooper Officer
Description: Imperial Mimban Lieutenant
Prefix: ID?
Detachment: Imperial Officer Corps
Context: Solo: A Star Wars Story
Required Costume Components
Hat, Olive
Fabric is a medium weight suiting material exactly matching the tunic and pants
Gabardine Style is most accurate
Color matches tunic and pants
Base of hat is conical, with a crown 4" (101.6 mm) tall.
Front and rear "flaps" overlap on the sides and are about 4" (101.6 mm) high.
Front bill extends 3" down, deocrated with (5) (6) or (7) concentric stitches
Imperial Code Disk positioned in the center of the front vertical "flap"
Code disk is painted Olive Drab to match the armor and belt
Code disk paint is "weathered"
OPTIONAL
Code disk does not have a notch
Code disk exactly matches a screen used prop.
Trenchcoat
Made of a medium-weight waterproof fabric that is olive-green; fabric has a matte finish.
Two flares at the breast overlap and close in the front, left breast over right. The collar continues around the neck and is approximately 3.5 inches wide.
The inner facing of the upper collar may be of darker fabric but is not required.
A seam runs down the arm on the outside, it begins at the costumers collar.
Two inch long cuffed sleeves with a single button towards the end of the cuff. The cuff "strap" ends in a chevron shape.
On the back the storm shield has a pinch pleat at the top center of the shoulders.
The coat ends mid-calf and is straight cut along the bottom edge.
The coat below the belt has a split seam in the back.
Two pocket flaps may appear at the costumer's hip, but are not required; if present, there should be no visible pocket stitching.
The coat is worn belted with the standard leather officer's belt.
Collar has a brown fur (or faux fur) collar lining
OPTIONAL
Coat shows wear and is muddy/dirty
Jodphur Trousers, Olive
Fabric is a medium weight suiting material exactly matching the tunic, or if no tunic is present are of an Olive-Green Color.
Gabardine style weave is most accurate.
Flared riding breeches are canon, with semi-stiff flares to the hip/thigh area.
Breeches are worn with boots.
Pockets are acceptable, although are not visible with the tunic on.
Officer Boots
Knee-high, black, lace-less, smooth non-textured, leather or leather-like material.
Rubber is not acceptable.
PVC or synthetic material is allowed as long as it gives the appearance of leather.
There are no stretch panels, buckles, snap tabs, or decoration.
Boots have conservative heels.
If zippers are present, they are hidden on the inner part of the boot shaft.
Not visible from the front, side or back.
The top of the boots may be flat or Spanish Style, but not Cowboy or Super Hero (pointed at the front) style.
OPTIONAL
Boots are muddy/dirty/dusty
Belt
The belt is constructed from a non-textured leather or a leather-like material.
Approximately 2" (50.8 mm) in width, up to 3" (76.2 mm) is acceptable.
There are no loops on the belt.
A single large snap or rivet is visible approximately 1" (25.4 mm) from the buckle.
The belt may be worn with the snap to the right or left of the wearer.
The buckle is constructed from a horizontally brushed metal, or metal looking material.
The buckle size is approximately 2 5/8" (66.7 mm) high and 4 1/8" (104.5 mm) wide with 0.5" (12.7 mm) radius rounded corners.
Buckle is adorned with an Imperial Code Disk at the center.
Buckle is painted Olive Drab to match the armor and hat code disk
Buckle paint is "weathered"
OPTIONAL
Belt is made of leather.
Buckle has a slight horizontal curve.
Gloves
Black, wrist length gloves constructed of a non-textured leather or leather-like material.
Enclosed fingers.
No buckles, straps, etc.
Rank Bar
Rank consists of colored plastic tiles mounted on a single or double metal bar.
Worn on the left side of the tunic over the heart.
Each bar is approximately 1" to 1.25" height.
Length is determined by chosen rank.
Rank tile dimensions and spacing are appropriate and proportional to the sizing of the bar to allow for equidistant and even spacing from each other and the border of the bar.
Please note that final dimensions of the bar is proportional to the wearer.
Rank bar corners are hard angle or slightly rounded
Rank tiles are translucent.
Rank bar must be representative of an Imperial Army Lieutenant, 2 red tiles first, followed by 1 blue tile
Rank bar must be of the single bar R1/ANH Style
Rank bar is worn on left collar lapel of Trenchcoat
OPTIONAL
Rank chosen must be referenced from film canon officers.
Rank consists of colored plastic push buttons mounted on a metal bar.
Chest Armor
Chest armor matches visual references
Accurate shape/design to front of chest
There is an indented area around the outer edge of the center flat section
Buckles attached to the upper chest plate
Shoulder straps are affixed to the chest plate at the buckle
To the lower left side of the center flat panel is a recessed area angled inward from top to bottom with a raised rectangle greeblie and a recess horizontal elongated oval
Left of the recessed area is a raised square that extended from the center to the curved side of the armor
On the top left side of the raised area is a raised oblong detail that protrudes outwards
Rank Bar is positioned just to the left of the center of the armor, where the intended area turns downward
Rank bar conforms to the Uniform Rank Bar requirements
Chest and straps shall be painted matte Olive Drab and may be moderately weathered
Collar Armor Cowl
Collar extends upwards and tapers onto the chest plate
Collar cowl attaches visibly to Chest Armor via segmented straps
Collar cowl and straps shall be painted matte Olive Drab and may be moderately weathered
Code Cylinders
Worn clipped behind the left lapel of the Trenchcoat
True Dosimeter Style, Silver Clip and Blue Top
3 are present
Belt Box
R1 Shoretrooper elongated double drop box
Long Drop Box shall be hinged
Box are painted the same Olive Drab as the chest armor and may be weathered
Ammo Pouch
Yugoslavian m49-M56 stye ammo pouch or replica. Replica must be made from leather or leather-like material.
Pouch is fitted with two straps
May be worn over the right shoulder with the pouch resting at belt height
Pouch may be weathered or otherwise aged
Oiler pouch is present attached to the upper strap of the pouch.
Scarf
A military style scarf is worn around the neck
Color shall be a dark olive drab/green
Scarf wraps around the neck and is tucked into the Chest Armor
OPTIONAL
Tunic
IF PRESENT:
Fabric is a medium weight suiting material matching the pants.
Gabardine style weave is most accurate.
Tunic is double-breasted with a left over right closure on the tapered yoke.
Yoke comes up across the shoulder to the top shoulder seam.
The standing collar has square corners and is between 1.25" (31.8 mm) to 2" tall.
Collar closes snugly and includes a modesty panel behind closure.
Collar edges are closed with two eye hooks.
There are code cylinder pockets on both outside panels of the jacket from about half way between the top and bottom on the arm hole.
Sleeves are long, and without decoration, cuffs or buttons.
Sleeves contain 2 seams.
One along the bottom and one along the back.
Tunic is constructed with no top-stitching (stitches visible on the exterior surface of fabric)
Hook and eye fasteners on the uniform should not be visible.
OPTIONAL
There is a dart in the top center of the tunic, this dart is between 2 inches (50.8mm) to the top of the code cylinder pocket in length.
There is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt.
The back of the tunic has princess seams that run vertically and turn outward to intersect the arm-hole seam at the vertical center.
Tunic is secured on the right side by snaps or buttons.
There is no top-stitching visible anywhere.
A lining is sewn in.
Goggles
WW2 Russian Aviator/Tanker goggles, or replicas thereof
Have a metal frame and black rubber padding
Elastic strap with side greeblies which are painted grey
Are ONLY worn on the hat and never worn over the eyes.
Strap is worn so that is is underneath the back "flap" of the hat and is centered with the front "flap"
Blaster
SE-14R Light Repeating Blaster & Holster
Barrel detailing is evident with the cocking lever and slider in place
The ejection port is also evident
The scope mount looks similar to the magazine bu smaller in size
Holster must be black and of appropriate style for the weapon
Holster has two belt loops, made of the same material as the holster
Holster is worn on the right side
Holster is made of Leather or a Leather-like material
Allow for other normal officer pistols? MSP-5, etc?
So I was browsing elsewhere on the forums and came across this thread that seems to say that the Solo and R1 Officers don’t have notches in the disc.
Is there a close up photo to justify the notch in the Mimban Officer cap - or was that taken from one of the other CRLs?
Solo - Officer Cap Disc https://r.tapatalk.com/shareLink?share_fid=51252&share_tid=10786&url=https%3A%2F%2Fwww%2Eimperialofficer%2Ecom%2Fforum%2Findex%2Ephp%3F%2Ftopic%2F10786-Solo---Officer-Cap-Disc&share_type=t
For sure - I am a longtime member of The Royal Manticoran Navy - this would not be my first rodeo with Cosplaysky - got to the point where we had to contract with a separate company to make our uniforms because CPS was getting way to inconsistent. Personally Ive not had a problem with them - but I know to send them EVERY measurement I can possibly take - lol.
But that is good to know - I wont derail the thread anymore and go back to lurking.
I do know that you only order the trousers and the tunic though. Ill order extra fabric and have Tiggwolf make me the cap.
Got the belt today from Anovos - and picked up the goggle from an etsy seller (who also does the chest armor apparently).
Thanks for the quick reply - this will be my first Star Wars cosplay - been meaning to do this for a while - but the standard Imperial Officer seemed so boring - the Mimban officers have much more "curb appeal" if that makes any sense - lol.
Sorry for the newbie question. I am looking to put a Mimban officer uniform (perhaps the Major - using information from this proposal) and after reading through the thread I had a question about the tunic.
Would the *New* Cosplaysky imperial officer uniform work for this - as the trousers, and tunic are largely hidden? The pants under the trenchcoat and the tunic under the chest armor.
Anovos is out for me because they don't have the olive uniforms - and I was looking at Magnolia - but they are expensive for something I'm going to distress and muddy up. Thoughts?
For sure - I am a longtime member of The Royal Manticoran Navy - this would not be my first rodeo with Cosplaysky - got to the point where we had to contract with a separate company to make our uniforms because CPS was getting way to inconsistent. Personally Ive not had a problem with them - but I know to send them EVERY measurement I can possibly take - lol.
But that is good to know - I wont derail the thread anymore and go back to lurking.
I do know that you only order the trousers and the tunic though. Ill order extra fabric and have Tiggwolf make me the cap.
Got the belt today from Anovos - and picked up the goggle from an etsy seller (who also does the chest armor apparently).
Thanks for the quick reply - this will be my first Star Wars cosplay - been meaning to do this for a while - but the standard Imperial Officer seemed so boring - the Mimban officers have much more "curb appeal" if that makes any sense - lol.
For sure - I am a longtime member of The Royal Manticoran Navy - this would not be my first rodeo with Cosplaysky - got to the point where we had to contract with a separate company to make our uniforms because CPS was getting way to inconsistent. Personally Ive not had a problem with them - but I know to send them EVERY measurement I can possibly take - lol.
But that is good to know - I wont derail the thread anymore and go back to lurking.
I do know that you only order the trousers and the tunic though. Ill order extra fabric and have Tiggwolf make me the cap.
Got the belt today from Anovos - and picked up the goggle from an etsy seller (who also does the chest armor apparently).
Thanks for the quick reply - this will be my first Star Wars cosplay - been meaning to do this for a while - but the standard Imperial Officer seemed so boring - the Mimban officers have much more "curb appeal" if that makes any sense - lol.