tennantlim

This was taken at The Last Jedi premiere in Jakarta, Indonesia. (Left to right: ID 16972, ID 48811, ID 20474, ID 25346)

Request Acknowledged

This was taken at The Last Jedi premiere in Jakarta, Indonesia. (Left to right: ID 16972, ID 48811, ID 20474, ID 25346)

This wasn't shot at an event but it's my favorite shot of most of our approved officers from Nusantara Command Division in one photo. 
 
From left to right:
IC 33647
IC 19715
IC 66603
IC 11196
TI 18608
IC 50895
ID 25346
TR 37922
ID 3906
SL 88668
TR 70385
ID 10783
ID 20474
ID 22793
ID 48811
ID 5881
ID 16972

This wasn't shot at an event but it's my favorite shot of most of our approved officers from Nusantara Command Division in one photo. 
 
From left to right:
IC 33647
IC 19715
IC 66603
IC 11196
TI 18608
IC 50895
ID 25346
TR 37922
ID 3906
SL 88668
TR 70385
ID 10783
ID 20474
ID 22793
ID 48811
ID 5881
ID 16972

This wasn't shot at an event but it's my favorite shot of most of our approved officers from Nusantara Command Division in one photo. 
 
From left to right:
IC 33647
IC 19715
IC 66603
IC 11196
TI 18608
IC 50895
ID 25346
TR 37922
ID 3906
SL 88668
TR 70385
ID 10783
ID 20474
ID 22793
ID 48811
ID 5881
ID 16972

This wasn't shot at an event but it's my favorite shot of most of our approved officers from Nusantara Command Division in one photo. 
 
From left to right:
IC 33647
IC 19715
IC 66603
IC 11196
TI 18608
IC 50895
ID 25346
TR 37922
ID 3906
SL 88668
TR 70385
ID 10783
ID 20474
ID 22793
ID 48811
ID 5881
ID 16972

This wasn't shot at an event but it's my favorite shot of most of our approved officers from Nusantara Command Division in one photo. 
 
From left to right:
IC 33647
IC 19715
IC 66603
IC 11196
TI 18608
IC 50895
ID 25346
TR 37922
ID 3906
SL 88668
TR 70385
ID 10783
ID 20474
ID 22793
ID 48811
ID 5881
ID 16972

Missing scene from Rogue one: Governor Pryce and Princess Leia fighting over Death Star Plans. 
 

This was originally submitted on the main forum mid last year and has been since Updated.
 
Character: Field Agent Yssane Isard
Context: Star Wars: Agent of the Empire Vol. 2
 
Below are the only Available References from the comic:


 
Model Danielle A Balanga
TKID: 42366
Philippine Garrison
Cebu Scarif Squad
 
Front

Back

 
Proposed CRL:
Description: ISB Field Agent Ysanne Isard
Prefix: ID
Detachment: Imperial Officer Corps 
Context: Star Wars: Agent of the Empire Vol.2
Following her father’s footsteps, Ysanne Isard served as an Imperial Officer, a field agent for the Imperial Security Bureau. She climbed the ranks to eventually become the Director of Imperial Intelligence. Isard is a close confidante of the Emperor, helping shape much of his governance. She is ambitious, ruthless and will resort to any means necessary to get ahead of her enemies. Cold and calculating, she will use everything from brute force to a charm offensive in her quest for power.
The 501st approval requirements are listed in black.

The Imperial Officer Corp Detachment defines additional, optional levels of costuming excellence. In the page below, items listed in blue are optional features that will improve the quality of the costume. Items listed in red are intended to further enhance the finished costume. Level 3 clearance submissions should match the configuration of an 'on screen' / named officer. 
 
For 501st membership only the requirements in black need to be met.
Required Costume Components
 
The following costume components are present and appear as described below.
 
 
Hair
For 501st approval:
•    Isard's Hair is black and straight, parted in the middle, shoulder-length.
•    The bangs are white.
•    This can either be a wig, or natural hair dyed black and white.
For level two certification (if applicable):
•    Hair must look natural, and styled in a way to not give the appearance of a wig.
Brown Red Lipstick
For 501st approval:
•    A shade of brownish red lipstick is to be worn, darker than natural lip color
 

Tunic, White
For 501st approval:
•    Fabric is a medium weight suiting material exactly matching the pants.
-Gabardine style weave is most accurate.
•    Tunic is double-breasted with a left over right closure on the tapered yoke.
•    Yoke comes up across the shoulder to the top shoulder seam.
•    The standing collar has square corners and is about 1.25" (31.8 mm) tall.
Collar closes snugly and stands with modesty panel
Collar edges are secured together
•    There are code cylinder pockets on both outside panels of the jacket from about half way between the top and bottom on the arm hole.
•    Sleeves are long, and without decoration, cuffs or buttons, cuts off at the wrist.
•    Sleeves contain 2 seams.
-One along the bottom and one along the back.
•    Tunic is constructed with no top-stitching (stitches visible on the exterior surface of fabric) 
•    Princess seams are optional for the ISB Isard tunic
For level two certification (if applicable):
•    There is a dart of about 2" (50.8 mm) in the top center of the yoke 
•    There is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt.
•    The back of the tunic has princess seams that run vertically and turn outward to intersect the arm-hole seam at the vertical center.
For level three certification (if applicable):
•    Tunic is secured on the right side by snaps or buttons.
•    Not hook and loop fastener (Velcro).
•    There is no top-stitching visible anywhere.
•    A lining is sewn in.
 
 
Ysanne's Rank Bar
For 501st approval:
•    See the Imperial Rank Bar page for more information.
•    Worn on the left side of the tunic over the heart.
•    Rank consists of colored plastic tiles mounted on metal bar.
•    Each bar is 1" (25.4 mm) height, length is determined by chosen rank.
•    Rank tile dimensions are 1/2" (12.7 mm)width x 3/4" (19 mm) height and about 1/8" (3.2 mm).
•    Tiles are mounted with 1/4" (6.4 mm) spaces between them.
•    Rank bar top row consists of six red tiles.
•    Rank bar bottom row consists of six blue tiles. 

For level two certification (if applicable):
•    Rank Bar is constructed with two separate strips, one atop the other, meeting together flush.
For level three certification (if applicable):
•    Rank consists of colored plastic push buttons mounted on a metal bar.
 
 
Belt
For 501st approval:
•    The belt is constructed from a non-textured leather or a leather-like material.
•    Approximately 2" (50.8 mm) in width, up to 3" (76.2 mm) is acceptable.
•    There are no loops on the belt.
•    A single large snap or rivet is visible approximately 1" (25.4 mm) from the buckle.
-The belt may be worn with the snap to the right or left of the wearer.
•    The buckle is constructed from a horizontally brushed metal, or metal looking material.
•    The buckle size is approximately 2 5/8" (66.7 mm) high and 4 1/8" (104.5 mm) wide with 0.5" (12.7 mm) radius rounded corners.
•    Buckle is adorned with an Imperial Code Disk at the center.
Please refer to the Imperial Buckle reference page for information on accurate and inaccurate style buckles.
For level two certification (if applicable):
•    Belt is made of leather.
•    Snap is worn to the left of the wearer.
•    Buckle has a slight horizontal curve.
 
Jodhpur Trousers, Black
For 501st approval:
•    Fabric is a medium weight suiting material exactly matching the tunic.
Gabardine style weave is most accurate.
•    Flared riding breeches with semi-stiff flares to the hip/thigh area.
•    Pockets are acceptable, only if hidden by the tunic.
•    Trouser legs are tucked into boots. 
 
 
Officer Boots
For 501st approval:
•    Knee-high, black, lace-less, smooth non-textured, leather or leather-like material.
-Rubber is not acceptable.
-PVC or synthetic material is allowed as long as it gives the appearance of leather.
•    There are no stretch panels, buckles, snap tabs, or decoration.
•    Boots have conservative heels.
•    If zippers are present, they are hidden on the inner part of the boot shaft.
-Not visible from the front, side or back.
•    The top of the boots may be flat or Spanish Style, but not Cowboy or Super Hero (pointed at the front) style. 
For level two certification (if applicable):
•    Boots do not have a zipper.
For level three certification (if applicable):
•    Boots are made of leather.
-Not vinyl or PVC.
•    Exact replicas of English riding (dress) boots or Equestrian boots.
Optional Accessories
Items below are optional costume accessories. These items are not required for approval, but if present appear as described below.
 
 
Ysanne's eyes
For 501st approval:
•    One red and one blue contact lens.
•    This style of contact lens may be worn, if desired.
-While encouraged to complete the look of this character, the contact lens requirement will be waived for 501st acceptance, if the applicant cannot wear contact lenses for health related reasons.
-All persons utilizing contact lenses are encouraged to first see their optometrist for a fitting. 
 
Grey Folder
For 501st approval:
•    Pale grey legal sized folder (14x8.5 inches) with no decoration on the exterior
ISB Ysanne Isard- Draft 4.pdf

Good luck Ricky!

For what it is worth, what I need, before this even thinks of becoming a reality, is:
 
1.  Pictures processed.  I have pictures, but they are raw and I have to get them processed.  I may or may not need different pics.  I can handle this bit.
2.  Final version of what the Detachment wants on text.  There was some back and forth, and I am not going to interpret / assume your words.
3.  Current Staff Officer CRL rewrite proposal / updated words given to account for the split.  AND an agreement from the Detachment on what it is / needs to be.  I had asked for that a bit ago, but haven't seen anything on it, yet.
 
The last one is pretty damn important.  I am not going to split out ANH until updated Imperial Staff is ready to publish at the same time.

Suggestion for Tunic portion: 
- Collar edges should close on the right side of the neck with two eye hooks.
- Collar closure edge should align with the right shoulder seam.

Suggestion for Tunic portion: 
- Collar edges should close on the right side of the neck with two eye hooks.
- Collar closure edge should align with the right shoulder seam.

I love where this is going. I currently have a 451 tunic under construction based on specs taken from Phil's photos and 1080p Bluray screenshots that I brightened with Photoshop. Hopefully it will fall within the CRL guidelines.

We can all vote on this now:
 

I love where this is going. I currently have a 451 tunic under construction based on specs taken from Phil's photos and 1080p Bluray screenshots that I brightened with Photoshop. Hopefully it will fall within the CRL guidelines.

Hello all!
 
Two weeks ago I started a new building project of an officer accessory for my Grand Admiral - a Grand Admirals Baton.
 
The baton, not to confuse with a swagger stick, was or is a rank insignia for the highest officers of the Army or Navy for representative use. In old days this was, among others, used by the French Marshals or the Austrian Archduke.
 
For example:
Austrian Archduke Baton

 
Prussian Batons

 
So I thought I make one of these for my Grand Admiral. I make it out of Wood and it will be later painted with a shiny coating of White and Gold.
 
First thing I did was cutting the wooden rod to a proper length and then drawing the ornaments and writing on it.
 
On two opposite sides I'm going to engrave our motto "duty honor empire" in Aurebesh letters, this will be flanked by the Imperial Sign:

 
Between these two there will be the ID Number and Nickname engraved, in Aurebesh Letters too of course, and again with the Imperial Sign:

 
On the second pic you see the first try of the Imperial Sign in Gold and I'm very happy with it. In total I will need 9 of the smaller signs in Gold.
 
At the tips of the baton will be two octagons that are also crested with the Imperial Sign:



 
The colours of the baton will be mirror-inverted, so White base means golden Ornament, golden base means White Ornament.
 
I also want to make two more batons, for the Grand General and the Grand Moff Rank. I plan to do the Grand Generals Baton with some sort of IOC green colour and silver ornaments and the Grand Moff Baton with Grey and something else, I have not yet decided.
 
Work is going slowly forward, because I have not so much time, but I will keep this thread updated.
 
 
Greetings
 
Stefan