chicken45

This is complete! @buckrogersbarker can we move this into the completed section?
 
EDIT JK I have the power to move them myself now. 

Gotta catch 'em all!
JZV_6615 by josh_surkosky, on Flickr

yes bosssssss

I KNOW. O.O

We updated the ANH Staff officer to further clarify the unique tunic and add graphics to help the GMLs differentiate that this is not just "the black version of the olive tunic"
 
Added "special notes" section.
Special Notes
This costume is very rare. This tunic was unique to ANH. It is NOT a black version of the standard olive tunic. The collar clips on the side of the neck instead of the center of the neck. The yoke closes up across the shoulder, instead of coming up to the shoulder seam. The tunic has top stitching in some areas, whereas other tunics have no top stitching. The rear sleeve seam opens at the cuffs, instead of having no opening. The rear of the tunic has double vents (one on each side), whereas other tunics have no vents present. Princess panels extend to the shoulder seam, whereas other tunics extend to the armhole.
If the tunic is a black version of the olive tunic, THIS IS NOT THE CORRECT CRL for it. The correct CRL is the Imperial Security Officer (Non Saga).  
 
Updated the picture for the tunic to show what is correct, and what is incorrect.
Tunic, Black Fabric is a medium weight suiting material exactly matching the pants and hat. Gaberdine style weave is most accurate. Tunic is double-breasted with a left over right closure on at the right shoulder-seam. The back of the tunic replicates the look of the double breasted design of the front. Yoke closes up across the shoulder to the top shoulder seam. The standing collar has square corners and is approximately 1.25' to 2' tall and closes snugly. Collar edges close on the right side of the neck with two eye hooks. Collar closure edge aligns with the right shoulder seam. There are code cylinder pockets on both outside panels of the jacket from about half way between the top and bottom on the arm hole. Sleeves are long, and without decoration, containing 2 seams, one along the bottom and one along the back. The rear sleeve seam opens at the cuffs at a length of about 3" (75mm) Tunic has top-stitching in these specific areas: Approximately 1/4" (6mm) from the outer edges of the double breast/double back, Approximately 1" (25,4mm) from the outer edge of the double breast/double back Directly underneath the edge of the code cylinder-pockets Hook and eye fasteners on the uniform are not visible.  
OPTIONAL Level two certification (if applicable): There is a dart in the top centre of the tunic, this dart is between 2 inches (50.8mm) to the top of the code cylinder pocket in length. There is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt.
OPTIONAL Level three certification (if applicable): Tunic to be secured on the right side by snaps or buttons, not Velcro. There is no topstitching visible anywhere but at the noted points. A cream lining is to be sewn in.

Ok, THIS is funny:
 

 
That said, I'm going to stick with ordering from OpenTip.  Seems a better likelihood of getting the correct trim, plus I can't bring myself to order from the Amazon seller.

Well since I have the Andor Tumbler, I decided to try my hand on finding bits for the ANH death star cup, managed to find the Tupperware Jellete bottoms easy enough on ebay, vendor just around the corner from me had 4 complete sets so saved on postage.

Top half will be a bit harder since no one on the RPF has found the original part used... might see about vintage aluminium cups or Thermos lids.

Sent from my SM-S916B using Tapatalk

That should make it clearer for sure.  It was confusing for many GML's, I had to explain it to my own Garrison's GML.
Thanks for the update.

We updated the ANH Staff officer to further clarify the unique tunic and add graphics to help the GMLs differentiate that this is not just "the black version of the olive tunic"
 
Added "special notes" section.
Special Notes
This costume is very rare. This tunic was unique to ANH. It is NOT a black version of the standard olive tunic. The collar clips on the side of the neck instead of the center of the neck. The yoke closes up across the shoulder, instead of coming up to the shoulder seam. The tunic has top stitching in some areas, whereas other tunics have no top stitching. The rear sleeve seam opens at the cuffs, instead of having no opening. The rear of the tunic has double vents (one on each side), whereas other tunics have no vents present. Princess panels extend to the shoulder seam, whereas other tunics extend to the armhole.
If the tunic is a black version of the olive tunic, THIS IS NOT THE CORRECT CRL for it. The correct CRL is the Imperial Security Officer (Non Saga).  
 
Updated the picture for the tunic to show what is correct, and what is incorrect.
Tunic, Black Fabric is a medium weight suiting material exactly matching the pants and hat. Gaberdine style weave is most accurate. Tunic is double-breasted with a left over right closure on at the right shoulder-seam. The back of the tunic replicates the look of the double breasted design of the front. Yoke closes up across the shoulder to the top shoulder seam. The standing collar has square corners and is approximately 1.25' to 2' tall and closes snugly. Collar edges close on the right side of the neck with two eye hooks. Collar closure edge aligns with the right shoulder seam. There are code cylinder pockets on both outside panels of the jacket from about half way between the top and bottom on the arm hole. Sleeves are long, and without decoration, containing 2 seams, one along the bottom and one along the back. The rear sleeve seam opens at the cuffs at a length of about 3" (75mm) Tunic has top-stitching in these specific areas: Approximately 1/4" (6mm) from the outer edges of the double breast/double back, Approximately 1" (25,4mm) from the outer edge of the double breast/double back Directly underneath the edge of the code cylinder-pockets Hook and eye fasteners on the uniform are not visible.  
OPTIONAL Level two certification (if applicable): There is a dart in the top centre of the tunic, this dart is between 2 inches (50.8mm) to the top of the code cylinder pocket in length. There is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt.
OPTIONAL Level three certification (if applicable): Tunic to be secured on the right side by snaps or buttons, not Velcro. There is no topstitching visible anywhere but at the noted points. A cream lining is to be sewn in.

We updated the ANH Staff officer to further clarify the unique tunic and add graphics to help the GMLs differentiate that this is not just "the black version of the olive tunic"
 
Added "special notes" section.
Special Notes
This costume is very rare. This tunic was unique to ANH. It is NOT a black version of the standard olive tunic. The collar clips on the side of the neck instead of the center of the neck. The yoke closes up across the shoulder, instead of coming up to the shoulder seam. The tunic has top stitching in some areas, whereas other tunics have no top stitching. The rear sleeve seam opens at the cuffs, instead of having no opening. The rear of the tunic has double vents (one on each side), whereas other tunics have no vents present. Princess panels extend to the shoulder seam, whereas other tunics extend to the armhole.
If the tunic is a black version of the olive tunic, THIS IS NOT THE CORRECT CRL for it. The correct CRL is the Imperial Security Officer (Non Saga).  
 
Updated the picture for the tunic to show what is correct, and what is incorrect.
Tunic, Black Fabric is a medium weight suiting material exactly matching the pants and hat. Gaberdine style weave is most accurate. Tunic is double-breasted with a left over right closure on at the right shoulder-seam. The back of the tunic replicates the look of the double breasted design of the front. Yoke closes up across the shoulder to the top shoulder seam. The standing collar has square corners and is approximately 1.25' to 2' tall and closes snugly. Collar edges close on the right side of the neck with two eye hooks. Collar closure edge aligns with the right shoulder seam. There are code cylinder pockets on both outside panels of the jacket from about half way between the top and bottom on the arm hole. Sleeves are long, and without decoration, containing 2 seams, one along the bottom and one along the back. The rear sleeve seam opens at the cuffs at a length of about 3" (75mm) Tunic has top-stitching in these specific areas: Approximately 1/4" (6mm) from the outer edges of the double breast/double back, Approximately 1" (25,4mm) from the outer edge of the double breast/double back Directly underneath the edge of the code cylinder-pockets Hook and eye fasteners on the uniform are not visible.  
OPTIONAL Level two certification (if applicable): There is a dart in the top centre of the tunic, this dart is between 2 inches (50.8mm) to the top of the code cylinder pocket in length. There is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt.
OPTIONAL Level three certification (if applicable): Tunic to be secured on the right side by snaps or buttons, not Velcro. There is no topstitching visible anywhere but at the noted points. A cream lining is to be sewn in.

We updated the ANH Staff officer to further clarify the unique tunic and add graphics to help the GMLs differentiate that this is not just "the black version of the olive tunic"
 
Added "special notes" section.
Special Notes
This costume is very rare. This tunic was unique to ANH. It is NOT a black version of the standard olive tunic. The collar clips on the side of the neck instead of the center of the neck. The yoke closes up across the shoulder, instead of coming up to the shoulder seam. The tunic has top stitching in some areas, whereas other tunics have no top stitching. The rear sleeve seam opens at the cuffs, instead of having no opening. The rear of the tunic has double vents (one on each side), whereas other tunics have no vents present. Princess panels extend to the shoulder seam, whereas other tunics extend to the armhole.
If the tunic is a black version of the olive tunic, THIS IS NOT THE CORRECT CRL for it. The correct CRL is the Imperial Security Officer (Non Saga).  
 
Updated the picture for the tunic to show what is correct, and what is incorrect.
Tunic, Black Fabric is a medium weight suiting material exactly matching the pants and hat. Gaberdine style weave is most accurate. Tunic is double-breasted with a left over right closure on at the right shoulder-seam. The back of the tunic replicates the look of the double breasted design of the front. Yoke closes up across the shoulder to the top shoulder seam. The standing collar has square corners and is approximately 1.25' to 2' tall and closes snugly. Collar edges close on the right side of the neck with two eye hooks. Collar closure edge aligns with the right shoulder seam. There are code cylinder pockets on both outside panels of the jacket from about half way between the top and bottom on the arm hole. Sleeves are long, and without decoration, containing 2 seams, one along the bottom and one along the back. The rear sleeve seam opens at the cuffs at a length of about 3" (75mm) Tunic has top-stitching in these specific areas: Approximately 1/4" (6mm) from the outer edges of the double breast/double back, Approximately 1" (25,4mm) from the outer edge of the double breast/double back Directly underneath the edge of the code cylinder-pockets Hook and eye fasteners on the uniform are not visible.  
OPTIONAL Level two certification (if applicable): There is a dart in the top centre of the tunic, this dart is between 2 inches (50.8mm) to the top of the code cylinder pocket in length. There is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt.
OPTIONAL Level three certification (if applicable): Tunic to be secured on the right side by snaps or buttons, not Velcro. There is no topstitching visible anywhere but at the noted points. A cream lining is to be sewn in.

I think we got these figured out.
 
cup by josh_surkosky, on Flickr
 
Click image to open expanded view       16Ft Chrome Silver Automotive Car Exterior and Interior Molding Trim Universal Bumper Window Door Body Side Decorative Strip Scratch-Proof (1/2 inch (12mm))
 
https://www.amazon.com/dp/B09YYSS7PR?psc=1&ref=ppx_pop_dt_b_asin_title
 
 
I cut these in 4 inch lengths.

Good news. This was just updated!

Gotta catch 'em all!
JZV_6615 by josh_surkosky, on Flickr

Hi Josh,
Has there been any movement on getting the CRL updated with the Andor ISB tunic color option? It has been several weeks. Thank you for your help getting this fixed.

And I appriciate you folks asking the questions! 
It may take a few weeks to push this through, so, in the meantime, if anyone has an issue getting approved because of the color, please reach out to me. 

Gotta catch 'em all!
JZV_6615 by josh_surkosky, on Flickr

There's a thread on the RPF about it. The black bottom portion is a Tupperware "Jel-ette" mold, while the silver top is still an unknown.

I did get an update this morning about changing the Face L2 requirement.
OPTIONAL Level two certification (if applicable):
Facial appearance and hair match very closely to that of Stanley Townsend. They asked to remove his name and make it something generic like "matches the onscreen character."
Thinking on it, the whole L2 requirement is redundant, so I removed it.
 
Most of the IOC face character CRLs do not mention this, but GM Tarkin and Moff Gideon do.
Admiral Tarkin's says "must look like Admiral Tarkin from the cartoon".
 
Regardless, we are almost there.

I'm looking forward to get the news of the accepted/approved CRL, Joshua keeps me updated. 
It's always difficult to be patient until the final "go"  .
 
But thanks a lot so far for all the support and the help to bring Beehaz to life. Wolf enjoyed wearing the uniform at SWCE and at Cruachan Dam in Scotland (original Aldhani location). 

That's because nobody actually made one yet and submitted it yet. I know Wampa Ware has a prototype working but it's not available yet.

Just a single trench-coat, although I love it. It's an olive green that goes with my non-saga military officer. 

Not sure if I can wear it with the V2 pants (straight pants), but here it is.


And, with the v1 pants:


Not a huge fan of the belted look, but here's that one, too:

This is my MazCave tunic. It is coming in around 1.8". Fortunately, I have a long turkey neck. Admittedly, it still feels like something I am wearing to improve my head and neck posture.  Took me a bit to get used to a collar that is higher than my other tunics, but after a few hours of wearing it, the feeling wore off.


FYI- I am in love with the caf cup. Great for holding electrolyte water to stay hydrated.
 
 

I am eager to see what happens when Thrawn shows up. My big question is will grand admirals have a purposefully different shade of white than ISB? 
I always thought it was cool he had a white uniform, but I didn't understand if there was a reason both he AND the ISB were the same color tunics, or if the tunics were supposed to even be different. But alas...
 
We know he's always been in a white uniform so it will be interesting to see how future discussions on this will play out. 
Rebels Thrawn is technically, a gray. 
 
As for collar height, @kman and I went into the weeds on this one as you can see on page 2 of this thead. 
1.75" is what WW sells, and it looks good on me and @buckrogersbarker.
I think 2 inch collars can work for larger folks, but not for the vast majority of us. 

Yeah the very light gray looks perfect outdoors, imo... unless you're appearing next to stormtroopers. Then it looks straight-up dove gray. Part of the reason I elected for cool white. But both are valid, the lighting on-set makes it difficult to tell a lot of the time when you look at actual screenshots vs. what was used on-set.

It seems the collars may be scaled a bit to the wearers, from the shots shared here? Definitely not over 2", though. Tbh the slightly less than 2" collar I had MazKave do is a bit too tall for my own neck, so I can't imagine making it any taller than that for most people.
 
Also have noticed multiple ISB officers in Andor sporting the Krennic-style flap-n-strap on the outside of the boot, which as far as I know, is not an allowed style for Executor in the ISB non-saga CRL.