lantern2745

Now that we're about 6 or so months out, I thought it was time for Star Wars Celebration 2020 to have it's own section.
I'll try to get all the FAQ type stuff in this post.
 
What: Star Wars Celebration 2020
Where: Anaheim Convention Center 800 W Katella Ave, Anaheim, CA 92802
When: August 27 - 30, 2020
More info as it comes in.  Until then, here is the official website
 
https://www.starwarscelebration.com/

Hey everyone,
 
I've been off these forums lately because, well, I had a date with Ms. COVID. It's been a rough hospital stay but I'm out and about, and as soon as I can stand(Laying in bed for weeks did nothing for my already bad knee) I'm submitting my photos for approval. I wanted to apologize to @AmadorHimselfand the others who were looking forward to more trivia; I never had time to write them up and then this happened. But I am alive, I am well, and I'm ready to be a bad guy, doing good.
 
Glory to the Empire,
Phillip

Wendy, and Andreas - You two certainly know this costume better than I, so your research will be what is leaned on.   
The pants legs seems to be the same to me (as how they are at the boot tops I mean).  And there is a seam down the center of the back still, so I'd think the zipper is hidden there.
The colored yoke part does seem shorter.  It looks to end at the bottom of the arm hole.
We can just barely see the logo on the front, but I can't tell if there is any Aurabesh lettering like on the R1 costume.
Unless we see them again, or get a Visual Guide reference (crossing my fingers) We would likely do as Kris said, and tweak the existing CRL to accomodate the Imperial Department of Research version as well.
That would probably include a name change to "Imperial Science Technician" or something along those lines.
- Jeff

I'm pretty sure the costume is the same as in Rogue One. Only the emblem has been replaced. I love that they stick to the idea of unifying the costumes, rather than creating many varieties, as in OT. I also remember that in one Darth Vader comic, there was a medical worker in the same suit. However, there was the emblem of the mudtrooper medic. I believe that the costume designers decided that it would be logical to distinguish scientists from different departments with their emblems.

I did the Cadet a few weeks ago for a friend and got her approved (ID-80688)! Now she is the first Cadet in Germany! We used this 3D-Files from Etsy:
 
https://www.etsy.com/de/listing/566412197/star-wars-imperial-kadett-helm-3d-druck?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=imperial+Cadet&ref=sr_gallery-1-1&organic_search_click=1
 
This Helmet has the up- and down moving Faceplate. It is rather small, i would recommend to scale it up by some percent, but it turns out quite nicely. 3D Print, so the Putty- and Sandjob is a Pain in the A***, but it is definately worth the Effort!

yup, it was a quick fix at time, but it works so well I never got rid of it.

To be honest if all goes how I hope this will be an easy thing to do 

Wendy, and Andreas - You two certainly know this costume better than I, so your research will be what is leaned on.   
The pants legs seems to be the same to me (as how they are at the boot tops I mean).  And there is a seam down the center of the back still, so I'd think the zipper is hidden there.
The colored yoke part does seem shorter.  It looks to end at the bottom of the arm hole.
We can just barely see the logo on the front, but I can't tell if there is any Aurabesh lettering like on the R1 costume.
Unless we see them again, or get a Visual Guide reference (crossing my fingers) We would likely do as Kris said, and tweak the existing CRL to accomodate the Imperial Department of Research version as well.
That would probably include a name change to "Imperial Science Technician" or something along those lines.
- Jeff

Damn... and I did this logo based on the screenshots posted above - not too far away, not knowing, it already existed ^^



I'll wait for some 4K Screencaps to do more research, but some differencesdifferes were already mentioned. But I like that they were inspired by the Rogue One costume of the scientists.

Let's roll with a week.

Reminder!
Any future updates, (if we get/need them) need to wait ONE WEEK from release of the episode.
The first update was almost a week, so no biggie.
- Jeff

Reminder!
Any future updates, (if we get/need them) need to wait ONE WEEK from release of the episode.
The first update was almost a week, so no biggie.
- Jeff

Update! 

Some CRL's have detail pages for certain parts. Like the ANH tie pilot helmet page. Maybe we should make those for the rank bars, code cylinder, code disk, and belt boxes. Ide be happy to help write that!

I feel like we discussed this earlier in the year, but can't remember if we reached a decision... and I can't find the thread either.
- Jeff

I feel like we discussed this earlier in the year, but can't remember if we reached a decision... and I can't find the thread either.
- Jeff

Belt on backwards hurt me though.  Any real world military if you put your ribbons on the wrong side or sewed a patch on the wrong arm, I think you'd get one heck of a chewing out.  Belt upside down when you Captain a ship?  Tsk! :p
 
Upon rewatch, I think you're right.  They definitely have a brighter backing material (or are color corrected in post-processing, more likely) than the OT badges did.  They're very spaced compared to their OT counterparts (and way more spacing than rogue one/solo ever had).  
 
For some reason I can't screenshot disney plus on my PC... screen goes black, or I'd post some identifying shots.
 
 
---
 
Actually I take it back.  I think the metal backing might be bigger and they're still Rogue One sized...  
 
Ignore me I need more coffee

I
Imperial Staff Officer (Non Saga)
Description: Imperial Staff Officer
Prefix: ID
Detachment: Imperial Officer Corps
Context: Rogue one, Solo, The Mandalorian and Expanded Universe.
These black uniformed officers are high class soldiers within the Empire's Imperial Army and provided a commanding presence among the legions of Stormtroopers where their leadership roles often inspire troops in battle. These ambitious officers not only serve aboard starships and military installations but are also pilots for transports,
 
Imperial Hat, black
Fabric is a medium weight suiting material matching the pants and tunic if applicable. Hat is coned shaped with a flat crown. Gabardine style weave is most accurate. Base of the hat is conical, with a crown about 4" (101.6 mm) tall. Front and rear "flaps" overlap on the sides and are about 4" (101.6 mm) high. Front bill extends 3" down, decorated with 5, 6 or 7 concentric stitches. Imperial Code Disk is positioned in the center of the front vertical flap. Code Disk has no notch detail on the outermost disk.  
OPTIONAL Level two certification (if applicable): Code Disk exactly matches anthology films.    
   
Tunic, Black Fabric should be a medium weight suiting material exactly matching the pants and hat. Tunic is double-breasted with a left over right closure on the tapered yoke. Yoke comes up across the shoulder to the top shoulder seam. The standing collar has square corners and is about 1.25" (31.8 mm) tall, closes snugly and includes a modesty panel behind closure. Collar edges are closed with two eye hooks. There are code cylinder pockets on both outside panels of the jacket from about half way between the top and bottom on the arm hole. Sleeves are long, and without decoration, cuffs or buttons, containing 2 seams, one along the bottom and one along the back. Tunic is constructed with no top-stitching (stitches visible on the exterior surface of fabric) Fasteners on the uniform should not be visible.  
OPTIONAL Level two certification (if applicable): There is a dart in the top center of the yoke. Dart should extend slightly past code cylinder pockets. There is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt. The back of the tunic has princess seams that run vertically and turns outward to intersect the arm-hole seam at the vertical center.  
OPTIONAL Level three certification (if applicable): Tunic must be secured on the right side by snaps or buttons, not Velcro.  
   
Rank Bar   Worn on the left side of the tunic over the heart. Rank consists of colored plastic tiles mounted on a single or double metal or metal looking bar. The bar is approximately 1" (25.4 mm) height. Rank tile dimensions are approximately 1/2" (12.7 mm) width x 3/4" (19 mm) height x 1/8" (3.2 mm) deep. - This is the OT size., the correct larger tiles are also acceptable. Tiles are mounted with approximately 3.5 mm spaces between them. Rank tiles are translucent, rectangular,  positioned side by side in a vertical orientation, and evenly spaced. Rank tile configuration may be from any licensed source however ranks specific to A New Hope only are not applicable.  
OPTIONAL Level two certification (if applicable): Rank consists of colored plastic push buttons mounted on a metal bar. Rank tiles are the larger Rogue One/Solo style (approximately 15 mm wide, 21 mm tall, and 3.2 mm deep).  
OPTIONAL Level three certification (if applicable):
Rank is chosen from Rogue One or Solo or The mandolorian.    
Code Cylinders Between 0 to 2 per costume may be worn.. Rod style: machined aluminum rod with flaring disc detail at top Dosimeter style: True Dosimeter with correct clip and blue top. Alternate Style: Silver clip with no blue top. If only one is worn, it is on the left side.  
OPTIONAL Level two certification (if applicable): Only real or replica dosimeters with silver toned clips or aluminum rod style are used.  
OPTIONAL Level three certification (if applicable):
Code cylinder combination must match chosen rank.  
 
 
   
Belt The belt is constructed from a non-textured leather or a leather-like material. Approximately 2" (50.8 mm) in width, up to 3" (76.2 mm) is acceptable. There are no loops on the belt. A single large snap or rivet is visible approximately 1" (25.4 mm) from the buckle. The belt may be worn with the snap to the right or left of the wearer. The buckle is constructed from a horizontally brushed metal, or metal looking material. The buckle size is approximately 2 5/8" (66.7 mm) high and 4 1/8" (104.5 mm) wide with 0.5" (12.7 mm) radius rounded corners. Buckle is adorned with an Imperial Code Disk at the center. Please refer to the Imperial Buckle reference page for information on accurate and inaccurate style buckles.  
OPTIONAL Level two certification (if applicable): Belt is made of leather. Snap is worn to the left of the wearer. Code disk matches anthology films. Buckle has a slight horizontal curve.  
OPTIONAL Level three certification (if applicable):
Belt has grooves 1/4" form the top and bottom edges.  
   
Jodhpur Trousers, black Fabric is a medium weight suiting material exactly matching the tunic and hat. Gabardine style weave is most accurate. Flared riding breeches are canon. Breeches must be worn with boots. Pockets are acceptable, although they are not visible with the tunic on.  
Officer Boots Knee-high, black, riding style, lace-less, smooth non-textured, leather or leather-like material. There are no buckles, snap tabs or decoration. Boots have conservative heels. A single stretch panel or zipper may be present, they are to be hidden on the inner part of the boot shaft. Not visible from the front, side or back. The top of the boots may be flat or Spanish Style, but not Cowboy or Super Hero (pointed at the front) style.  
OPTIONAL Level two certification (if applicable): Boots do not have stretch panels or a zipper.  
OPTIONAL Level three certification (if applicable): Boots are made of leather. Exact replicas of English riding (dress) boots/ Equestrian boots or German marching boots. Boots may have top adjustment strap on the outside of the boots. Strap is set slightly to the rear.  
  Optional Accessories Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.
 
Rain Poncho Made of a black, water sheeting polyester or nylon material. The closure is located at the costumers right side. The collar overlaps and the opening is approximately 2.5 inches on the shoulder, going down vertically to the bottom of the yoke. The yoke is flush against the costumer and has a seam down the front center, this ends in a point. The edge of the poncho has approximately 1 inch seam around all edges. The collar is approximately 3 inches tall at the front and is top stitched with lines approximately every 1/4 inch. The back of the poncho is flat across the back. The poncho voids at the edge of the costumers shoulders. The front of the poncho has a piece attached to the yoke but separate from the sides The front extends down to just past the crotch area and is tucked in to the costumer's belt. There is a code cylinder pocket in which two code cylinders are worn.  
 
Trenchcoat Made of a medium-weight waterproof fabric that is black; fabric has a matte finish. Two flares at the breast overlap and close in the front, left breast over right. The collar continues around the neck and is approximately 3.5 inches wide. The inner facing of the upper collar may be of darker fabric but is not required. A seam runs down the arm on the outside, it begins at the costumers collar. Two inch long cuffed sleeves with a single button towards the end of the cuff. The cuff "strap" ends in a chevron shape. On the back the storm shield has a pinch pleat at the top center of the shoulders. The coat ends mid-calf and is straight cut along the bottom edge. The coat below the belt has a split seam in the back. Two pocket flaps may appear at the costumer's hip, but are not required; if present, there should be no visible pocket stitching. The coat is worn belted with the standard leather officer's belt or loose.  
 
Belt Boxes Dimensions are approximately  2" (50,8mm) wide by 3" (76.2 mm) tall by 1" x  (25,4mm) thick Two boxes to be worn vertically, one each on either side of the belt buckle.  
OPTIONAL Level two certification (if applicable): Belt boxes should include a lid on back of the box. Belt boxes are made of metal.  
OPTIONAL Level three certification (if applicable): Belt box, code cylinder, and rank badge configuration is consistent with one another.  
 
Gloves
Black, wrist length gloves constructed of a non-textured leather or leather-like material. Enclosed fingers. No buckles, straps, etc. May have three stitched lines on the back of the hand.  
SE-14R Light Repeating Blaster
The barrel detailing is evident with the cocking lever and slider in place. The ejection port is also evident. The scope mount looks similar to the magazine but smaller in size. The scope does not protrude past the blaster body.  
Holster. Made of black leather or leather-like material.  
OPTIONAL Level two certification (if applicable): Holster is affixed via a single loop over the belt. Holster is made of leather. OPTIONAL Level three certification (if applicable): Holster matches reference image.

We also see a “staff officer” piloting a Gozanti.  Get ready for the JRS to try and poach   

This thread has a break down.
 
 
And this one helps too.
 
 

That was an oversight.  We have to manually add them, and sometimes we miss one.  All fixed!  Congrats!
- Jeff
 

Thank you lantern2745. I didn´t know that the background was related to the number of troops. I thought one stripe was for L2 and 2 for L3 while stars just represented the number of approved costumes. Never mind, my mistake. Thanks a lot!

This thread has a break down.
 
 
And this one helps too.
 
 

How about?
 
Worn on the left side of the tunic over the heart. Rank consists of colored plastic tiles mounted on a single metal or metal looking bar. The bar is approximately 1" (25.4 mm) height. Rank tile dimensions are approximately 1/2" (12.7 mm)width x 3/4" (19 mm) height x 1/8" (3.2 mm) deep. - This is the OT size. Tiles are mounted with approximately 3.5 mm spaces between them. Rank tiles are translucent, rectangular,  positioned side by side in a vertical orientation, and evenly spaced. Rank tile configuration may be from any licensed source however ranks specific to A New Hope only are not applicable.  
OPTIONAL Level two certification (if applicable): Rank consists of colored plastic push buttons mounted on a metal bar. Rank tiles are the larger Rogue One/Solo style (approximately 15 mm wide, 21 mm tall, and 3.2 mm deep). Rank bar is a single row.  
OPTIONAL Level three certification (if applicable):
Rank is chosen from Rogue One or Solo.

Do we want to just go with Metric sizing and ditch the Imperial?  Or run the Metric first and Imperial in brackets?